Aligning memory to page size will require at lead 8KB per allocation (even for 8
bytes). This should severely reduce memory requirements of all dde_linux
projects.
related to #2731
If the remote DNS server address value of a DHCP server changes, the affected
interfaces do a link down/up to inform all DHCP clients that they should
re-request their DHCP info.
Issue #2730
The dns_server_from attribute of the dhcp-server tag has effect only if
the dns_server attribute of the same tag is not set. If this is the
case, the dns_server_from attribute states the domain from whose IP
config to take the DNS server address. This is useful, for instance, if
the stated domain receives the address of a local DNS server via DHCP.
Whenever the IP config of the stated domain becomes invalid, the DHCP
server switches to a mode where it drops all requests unanswered until
the IP config becomes valid again.
Issue #2730
Until now, the DHCP server of a domain was re-constructed each time the
IP config changed. This is not necessary as a domain that acts as DHCP
server must have a static IP config as it would be senseless to act as
DHCP server and client at the same time. Now, a configured DHCP server
is constructed only when the Domain gets constructed and stays alive
until the domain gets destructed. Furthermore, we now throw Domain::Invalid
if there is no static IP config plus a DHCP server configured. However, by
now, this exception is not caught as it is not trivial to destruct the
domain at this point.
Issue #2730
The Interface constructor previously tried to attach to a domain. This
might include sending a DHCP request to get the domain a valid IP config.
But in order to achieve this, the constructor used a pure virtual method
of Interface which crashes due to the unfinished vtable. To fix this bug,
the attach attempt was moved to a new Interface::init method.
Issue #2730
Instead of Pointer<T>::set use assignment operator with implicit constructor
from T-reference. Instead of Pointer<T>::unset use assignment operator with
Pointer<T>(). Instead of Pointer<T>::deref provide () operator.
Issue #2730
A very basic test of the re-configurability. It overwrites the configuration
once without making any changes, once with removing all domains except
uplink, and a third time recovering to the initial configuration to see if
the clients keep going as soon as their domains are back.
Fixes#2670
The router reacts as follows to a configuration change:
1) Construct new internal configuration representation (the old one stays
in place to be able to do comparisons in the following steps)
2) Iterate through all user-dependent objects (interfaces, link states, ARP
information, DHCP information) and re-check which remain valid with the
new configuration and which must be dismissed.
3) Adapt the objects that remain valid to the new configuration (re-write
references) and remove or detach the dismissed objects.
4) Do a link state DOWN at each interface and a link state UP at each
interface that remains attached to a domain.
5) Replace the old internal configuration representation with the new one
This way, the router keeps as much user dependent states as possible
while going through a configuration change. Thus, overwriting the old
configuration with an exact copy of itself is (almost) transparent to
clients of the router. Almost, because there are things the router must
do on every configuration handling, like re-scheduling the expiration
timeouts of links.
Ref #2670
The for_each method of the List wrapper remembers the next list item
before calling the functor on the current one, so, the current one can
be destroyed during the functor.
Ref #2670
Clients can connect at any time to the NIC router. The interfaces (sessions)
get attached to the appropriate domain as soon as it appears. This implies
that interfaces can also be detached from a domain without beeing destructed
when the domain disappears. All user dependent states of an interface such as
the link states, DHCP allocations and ARP information get lost when the
interface gets detached.
Ref #2670
This separates the decision wether to log the received and sent packets
from the 'verbose' attribute. This information is now only logged if
'verbose_packets' is switched on. If 'verbose' is switched on, only
routing decisions and optional hints are printed.
Ref #2670
We disable super-page I/O mappings because our unmap code does not flush
local mappings from core and, thus, breaks later re-mappings of
different page size.
Issue #2547
Switch port I/O based PCI config space access to memory-mapped IO. The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.
The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.
The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.
Fixes#2547
The KIP address range resides in virtual memory while io_mem alloc
manages physical-address ranges.
The patch enables the use of ECAM/MMCONF for PCI configuration.
Issue #2547
Link the EGL library with Mesa. SDL's `GL_GetProcAddress` now calls
`eglGetProcAddress` rather than lookup procedures directly in the Mesa
library.
Components may still wish to list 'mesa_api' in LIBS to access OpenGL
headers.
Fix#2711
Adjust managed dataspace (== max memory provided to rump kernel) based
on 32/64 bit architecture. On 32bit is it 256M, on 64bit is 4G.
Additionally limit the actual announced memory to rump by the available RAM and
by the maximum size of the managed dataspace.
Fixes#2709
The visibility of the client's view is re-evaluated at each animation
step. However, when the client appears long after the initial
fade-in/out animation is completed, the initial visibility state
remaines unchanged. This happens when booting the Sculpt scenario in
Qemu where the the nit_fb instances of the leitzentrale could not be
started in time. This patch fixes the issue by re-evaluating the view
visibility also at the view-creation time.
This prevents diagnostic messages like
Error: partial write detected 0 vs 31
for writes into already released socket directories due to a still-open
handle to the socket data file.
We need to update the blueprint pkg path as well in case the start node
is changed. Otherwise the query tool will keep using the initially
configured pkg path.
In case the signature file is corrupt, e.g. it could not be downloaded
successfully, the gnupg code just prints an error message but will not
return the error to the user. So we patch the code to return the error
and check the value in the calling code.
The sinfo API now also exports PCI devices without logical IRQs.
Therefore, explicitly check interrupt count in get_msi_params() function
and ignore such devices.
- Use latest Muen version
- Sync VirtualBox Muen subject state
- Drop unneccessary subject IP patch
- Adapt Muen RUN_OPTs
- Update documentation
Note: the GPL 2017 toolchain is now required and as the debug output
format has changed the mulog-subject.py script must be updated on
autopilot instances.
Remove the dependency on the deprecated LwIP libary.
Remove the progress logging callback. Should a progress indicator be
desired, a progress report would be more appropriate.
Fix#2684
This patch improves the error handling for the case where the depot
lacks the content of the to-be-deployed pkg. Instead of infinitely
reattempting to obtain blueprints for such content, the deploy tool
prints a single message.
This patch adds two key remappings for the magic keys of the sculpt
scenario. KEY_DASHBOARD toggles the leitzentrale. KEY_RESTART resets
the noux-control subsystem of the leitzentrale.
Issue #2676
If only a single AHCI device is present, the block service provided by
the drivers subsystem allows the client to refer to this block device
via the label 'default'.
Issue #2676
This patch adds a safety check to nit_fb to ensures that nit_fb never
runs out of RAM. Should the available RAM not suffice for resizing the
virtual framebuffer to a new mode, it keeps the current mode.
The Dir_file_system uses static cast to convert handles from the
application to a plugin local type. For this reason, only the local
handle type may be returned from 'opendir' or 'open'. This fixes the
unexpected behavior when opening directories as files.
Fix#2533
This patch removes the notion of partial writes from the file-system
servers. Since write operations are asynchronously submitted, they are
expected to succeed completely, except for I/O errors. I/O errors are
propagated with the write acknowledgement but those are usually handled
out of band at the client side. Partial writes must never occur because
they would go undetected by clients, which usually don't wait for the
completion of each single write operation.
Until now, most file-system servers returned the number of written bytes
in the acknowledgement packet. If a server managed to write a part of
the request only, it issued the acknowledgement immediately where it
should have cared about writing the remaining part first.
The patch detects such misbehaving server-side code. If partial writes
unexpectedly occur, it prints a message and leaves the corresponding
request unacknowdleged.
Issue #2672
File_system clients may now watch files and directories for changes by
opening a 'Watch_handle' rather than submitting a 'CONTENT_CHANGED'
packet to the server. When a change happens at a node with an open
Watch_handle a CONTENT_CHANGED packet will be sent from the server to
the client. This serializes registration with other handle operations
and separates I/O handle state from notification handle state.
Test at run/fs_rom_update.
Ref #1934
Catch out of RAM and capability exceptions and return error values.
Abort opening a composite directory at Dir_file_system where an
opendir call on any child file-system returns an OUT_OF_RAM or
OUT_OF_CAPS error.
Ref #2642
This change enables the use of negative values for the 'initial_width'
and 'initial_height' attributes to specify values that are relative to
the screen size. This is consistent with the meaning of the 'width' and
'height' attributes.
This patch changes the 'depot_deploy' tool to spawn any number of
runtimes. In contrast to the original version, which merely consumed a
blueprint generated by a pre-configured 'depot_query' instance, the new
version actively generates queries as needed. So there is a feedback
loop between 'depot_deploy' and 'depot_query'. The instantiation of
subsystems is controlled by the '<start>' nodes of the 'depot_deploy'
configuration. For each start node, the tool tries to determine the
ingredients (provided by the depot) by asking the 'depot_query' tool.
Once the information is complete, a corresponding start node of the
dynamic init instance is generated.
This patch introduces the subnodes <provides>, <requires>, and
<content> to the <runtime> node. All <rom> sessions that are
expected from the depot appear within the <content> node, which
sets them nicely apart from <rom> sessions that may be required
as runtime arguments.
Note that the <requires> and <provides> nodes do not appear in the
patch because the existing depot_deploy tool does not interpret this
information (the pkg/test-fs_report runtime does not provide any
service, and the timer session is provided as a common route).
This patch adds the config attribute 'query'. If set to the value "rom",
the query information is obtained from a ROM session labeled "query".
Otherwise, the query information is expected to be part of the config.
This enables us to use the component in two different scenarios. In
one scenario, 'depot_query' is embedded in a managed dynamic init.
Here, taking the query from the config is easy. In the other scenario,
'depot_query' is running as a daemon with a once-configured VFS but
varying queries. The queries originate from a component that does not
control the 'depot_query' config.
The new 'Terminal_session::size_changed_sigh' RPC function registers a
signal handler that is triggered each time when the terminal size
changes. It enables the client to adjust itself to the new size by
subsequently calling the 'size' RPC function. Of all terminal servers,
only the graphical terminal triggers this signal.
- handle line wraps in 'ech()'
- take (1,1) origin into account in 'hpa()' and 'vpa()'
- unify handling of SGR escape sequences of different lengths
- accept the '[?2004h' and '[?2004l' escape sequences (used by midnight commander)
Fixes#2671
The 'Expanding_reporter' wrapper for the 'Reporter' eliminates
the burden of handling 'Xml_generator::Buffer_exceeded' exceptions
from components that generate reports.
Fixes#2655
Instead of having a lot of platform specific quirks in the run test,
and to also test it on platforms currently missing a NIC driver,
this commit removes hardware drivers from the nic_router and
nic_bridge run scripts, and uses the nic_loopback server instead.
AVL trees can't be copied with the default copy constructor as the
parent pointer of the first item of both of the resulting trees would
point to the original tree. Copying an AVL node, however, generally
violates the integrity of the corresponding tree. The copy constructor
of Avl_tree is used in some places but in those places it can be
replaced easily. So, this commit deletes the copy constructor of
Avl_node_base which makes Avl_node and Avl_tree non-copyable.
Issue #2654
On platforms without nic or audio driver support, the corresponding
functions to return the correct names should return a meaningful
name instead of an empty list. Otherwise, in an erroneous run-script
that calls those functions to append names to the boot modules
the whole 'bin' directory is appended instead, which leads to big
image files or errors when linking the boot modules to core.
This patch adds hooks for customizing the location of the configure
script within the package, the build target, as well as the install
step. This is useful for packages like tcl that deviate from the
usual layout of source packages.
Issue #2648
The 'trace_logger' component can be used to easily gather, process and export
different types of tracing data. Which subjects to select is configurable via
session label policies and thread names. Which data to collect from the
selected subjects can be configured for each subject individually, for groups
of subjects, or for all subjects. The gathered data can be exported as log
output.
This is an example configuration of the 'trace_logger' component which shows
the default value for each attribute except the policy.thread and
policy.label:
! <config verbose="no"
! session_ram="10M"
! session_arg_buffer="4K"
! session_parent_levels="0"
! period_sec="5"
! activity="no"
! affinity="no"
! default_policy="null"
! default_buffer="4K">
!
! <policy label="init -> timer" />
! <policy label_suffix=" -> ram_fs" />
! <policy label_prefix="init -> encryption -> "
! thread="worker"
! buffer="4K"
! policy="null" />
! </config>
For more details see os/src/app/trace_logger/README.
Fixes#2654
Building this policy was disabled by a REQUIRES = riscv_toolchain_bugfix
to prevent compiler crashes on nightly test builds. Since the latest
RISCV toolchain update, test builds for RISCV crash at much more places
which makes this single work-around senseless.
Issue #2654
Previously, base/trace/buffer.h included base/thread.h which includes
base/trace/logger.h which includes base/trace/buffer.h.
Removed the base/thread.h include in base/trace/buffer.h as it is not
needed.
Issue #2654
The 'Buffered_xml' utility is used by three components and a fourth is
on the way. To avoid another duplication of the code, this patch makes
it publicly available at 'os/buffered_xml.h'.
This patch replaces the 'Heap' by a 'Sliced_heap' to avoid the
allocation of a 16 KiB memory block when 'dummy' acts as a server. On
seL4, such an allocation would exceed the 1M quota as assigned by the
init.run script.
The 'initial_width' and 'initial_height' attributes were added to
accomodate the use-case to set the initial dimensions whenever 'nit_fb'
is used in a dynamic fashion, e.g, in combination with a window manager.
These attributes may not be mixed with the 'width' and 'height'
attributes, which are mostly used when a static size configuration is
desired.
When a NIC session is destructed at the router, we have to remove all ARP
cache entries that match the MAC address of that session. Otherwise the
outdated entries might be re-applied later, leading to wrong destination
MAC addresses in routed packets.
Fixes#2637
By specifying the 'config' of a '<runtime>' as an attribute, we can
distinguish the case where the config is obtained from a ROM session
from the case where the config is specified inline as a '<config>' node.
The new 'verify' component facilitates the code of GnuPG to verify
detached OpenPGP signatures against public keys.
Since GnuPG depends on libgcrypt and libgpg-error, the patch adds these
libraries to the libports repository.
Fixes#2640
This fix handles the case where the focused domain loses its focus
because the currently focused client vanishes. In this case, the focus
will be undefined and the non-focused views of the domain become
tinted again. The refresh should take effect immediately as soon as the
client vanishes.
With this patch, init responds to the exit of a child by closing all
sessions of the child. E.g., if a child is a GUI application, its
nitpicker session is closed at the time of exit, not at the time when
the start node disappears from init's configuration.
Since this change requires a modification of the 'Genode::Child' class,
it takes the chance to make the child-destruction less brutal. The
new version ensures that all threads of the destructed subsystem are
destructed before other sessions, in particular PD sessions. This
eliminates spurious page-fault warnings during the child destruction.
On Fiasco.OC, closing the CPU session of a thread while being called by
the thread causes a deadlock. Hence, we skip the eager destruction of
CPU sessions on this kernel.
Related to issue #2659
Adds two new netperf tests, netperf_lxip_router and netperf_lwip_router
who test the TCP throughput of the NIC router when routed with a tcp-forward
rule and NAT.
Issue #2624
which executed in the current measurement period but are now dead.
Keep the Entry object up to next period, where the recent_execution_time will
become 0 since it will not execute definitely.
Issue #2638
Previously, the dst_len value was not decreased after each character that was
written to the dst buffer. This way, if the content length was greater than
dst_len, decoded_content wrote to memory out of bounds.
Issue #2644
Do not leave space for a terminating '0' at the end of the dst buffer in
decoded_content as the method does not write this '0'. The caller of the
method shall take care of it instead.
Issue #2644
Until now, if we examined an EPT fault and the corresponding guest
physical memory was not allocated, we forwarded the faulting instruction
to the instruction emulator, which in turn handled the memory allocation
implicitly. This lead to long instruction emulation times on certain
instructions (e.g. 'rep mov' on large memory junks). Therefore, we now
allocate and map the corresponding guest physical memory immediately in
the EPT fault handler and directly return to the guest.
fixes#2645
Require x86_64 because memory/adress space limitations on x86_32
restrict the use-cases on such a platform anyway. Doing that,
we can also assume that memory adresses are always 64bit long and
do not have to handle 32bit adresses.
According to the creator of the net-stat lib, this lib was a mere debugging
tool that is not used anymore nor worth the work of updating the it to
modern Genode coding paradigms. Also, there exist no tests for the lib.
Instead of having a method validate_size in each packet class, check
sizes in the data accessor of the surrounding packet class. This packet
accessor is the one that casts the data pointer to the desired data type
so it is sensible that it also checks whether the desired type would
exceed the available RAM before doing the cast. This also fits nicely
the fact that for the top-level packet-class of a packet, the size must
not be checked (which was previously done).
Issue #465
The TCP window scaling is implemented for servers (like netperf's
netserver) only. The client implementation just uses the lower 16 bits
of the TCP_WND configuration value, which we therefore maximize to ~64K.
The '<dependencies>' attribute 'path' refers to a depot archive.
Depending on the attributes 'source="no"' and 'binary="no" (defaults
shown), the depot_query component determines the source/binary
dependencies of the given archive. The result has the form of a report
with a sequence of <missing> and <present> nodes, each equipped with the
'path' of the dependency.
Since the <query> node results in the generation of a "blueprint"
report, it should better be named <blueprint>. This also clears the way
for adding further query types such as <dependencies>, following the
same pattern of generating a report of the corresponding query name.
With this patch, it becomes possible to pass a 'Directory const &' to
the constructor of 'File_content', which is intuitive as the directory
content is not changed by reading a file.
The 'File_content::for_each_line' method did not correctly detect the
end of data for files without a trailing linebreak, thereby cutting the
last character from the last line.
This patch removes the former use of ram_fs, fs_rom, and fs_report from
the subsystem and uses a report_rom instead. The fs-based reporting was
introduced to accommodate automatically instantiated usb_block drivers,
which turned out to be impractical for the sculpt scenario.
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
This patch enables the warnings -Wextra, -Weffc++, and -Werror for
compiling Genode components. It thereby helps us to detect bugs like
uninitialized member variables or missing virtual destructors at compile
time. The warning level is defined via the new 'CC_CXX_WARN_STRICT'
variable. For targets that compile 3rd-party code where this warning
level is not applicable, the variable may be explictly set to an empty
value in the corresponding build-description file.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
The warning "no interface connected to domain" was introduced when only one NIC
session at a time could be connected to a domain. It should help to track
packet drops that were caused by startup timing issues between servers and
clients. However, a user should watch the "NIC sessions" value of a domain
(verbose_domain_state) instead when debugging packet loss. With support for
multiple sessions per domain, even a non-empty domain may still miss the
session that connects the desired server.
Fix#2629
Stdin, stdout, and stderr are mapped to descriptors 0, 1, and 2
respectively. If these first three descriptors are not allocated before
the application becomes active then normal files and sockets can be
opened under these numbers, potentially causing unexpected application
behavior.
Fix#2628
This patch makes the creation of the libc's timer session depend on
whether or not the 'rtc' attribute of the <libc> configuration is
defined. If not configured, 'clock_gettime' returns 0.
Fixes#2625
Previously, all packets that the router wanted to sent were first prepared to
their final state and then copied at once into the packet stream RAM. This is
fine for packets that the router only passes through with modifying merely
a few values. But for packets that the router writes from scratch on its own,
it is better to compose the packet directly in the packet stream RAM.
Fix#2626
Normally, Interface::send always takes the base and size of the RAM region
where a packet was composed and copies this finished packet at once into the
packet stream RAM. But we want to be able to also compose packets directly in
the packet stream RAM, so that no memcpy is needed. Thus, Interface::send now
takes a functor that describes how to compose the packet, then allocates the
packet stream RAM and applies the functor to this RAM. there is also a version
of Interface::send that provides the old behavior but with the new back end.
This way, we stay backwards-compatible.
Issue #2626
When composing an ARP packet for sending, it's pointless to use the Arp_packet
constructor as the constructor only checks whether the packet is malformed.
Issue #2618
The NIC router can now be configured to periodically send reports.
Configuration example (shows default values):
<config>
<report interval_sec="5" bytes="yes" config="yes">
</config>
If the 'report' tag is not available, no reports are send.
The attributes of the 'report' tag:
'bytes' : Boolean : Whether to report sent bytes and received bytes per
domain
'config' : Boolean : Whether to report ipv4 interface and gateway per
domain
'interval_sec' : 1..3600 : Interval of sending reports in seconds
Issue #2614
Avoid that the user has to define the number of HTTP/UDP clients manually.
This count is used by the run scripts to generate the expected log output.
Fix#2609
In the context of link state objects we often used the term "close" were we
actually meant "dissolve". The term "close" originated from the TCP connection
state and is still used in TCP links in the correct manner.
Issue #2609
Act as hub for the interfaces at a domain. This also changes the roles of the
Domain and Interface classes. By now the Interface held the data structures for
the ARP cache, foreign ARP waiters, and the searchtrees for layer 3 links. All
these structures have moved to the Domain while the memory allocations and
lifetime management for the contents of these structures still come from from
the according Interface object. The mentioned data structures were also adapted
to fit the fact that they now may maintain objects of different interfaces.
Issue #2609
If an IPv4 packet targets an IP local to the domain it comes from and doesn't
target the routers IP of that domain, forward it to all other interfaces of
the domain without considering any other routing.
Issue #2609
Previously, the function that returned the XML config for a network test
client/server in the scripts formed the component name of the peer solely
by combining the protocol name, "client" or "server", and a suffix that
is given as argument. However, to group multiple clients together in one
domain via their session label at the NIC router we want peers with the same
name prefix. Thus, the function now simply takes the whole name as argument.
Issue #2609
Improve ARP handling code in general:
Make the several cases and their handling more clear by using a more
readable if/else statement structure. Drop gratuitous ARP requests.
Domain-local ARP:
Handle ARP packets that target local IPs other than the routers IP
(forward them to all other interfaces of the domain).
Issue #2609
IP allocations were renamed DHCP allocations without fixing the according
places in log messages and comments. This commit rectifies this omission.
Issue #2609
This is necessary because in contrast to the zynq boards (see specs in genode-world), only zynq_qemu uses UART_0.
These files should thus fall under the zynq_qemu spec.
Fixes#2615
In newer glibc versions, the '__sigword' and '__sigmask' macros are only
available in sigsetops.h which is not installed. These macros are not
system-specific, hence we implement them explicitly ourselves.
Fixes#2616
The new variable 'INSTALL_TAR_CONTENT' allows one to customize the
content of the generated tar archive instead of including the entire
install directory.
This patch makes service-announce messages depend on the configured
verbosity. It also omits "parent provides" title messages if no new
parent services are added during a config update.
Detect loops by walking hard-links at two different speeds and checking
for lapping. Tar link walking is no longer a recursive procedure.
Caught a loop created by GNU tar 1.29.
Fix#2611
This patch changes the depot layout such that each archive is
represented as a directory that contains the versions of the archive as
subdirectories.
Issue #2610
If a client decides to spontaneously send a DHCP DISCOVER again, even though
he has received a still valid IP config from the router, we don't want to
discard the DISCOVER like it was done before but discard the IP config
assignment and offer a new one.
Issue #2534
When this flag is set in the config tag, the NIC router will print a
short information to the log for each general state change of a domain.
This includes currently the IP-configuration state and the number of
connected NIC sessions. This a useful addition as the normal verbose
flag's purpose is a very deep insight into almost every activity in the
router, which is cool for debugging sophisticated problems but normally
floods the log and therefore discards this option for, e.g., desktop
systems. In such systems, the new verbosity is pretty discreet but
already gives a good hint on why packets may get dropped by the router
although the routing rules are correct.
Issue #2534
The run tool now by default checks configurations with target-specific
XML schemata. Each component may define a config schema file in its
target.mk via the CONFIG_XSD variable. When the run tool has checked an
configuration of an init instance, it additionally goes through the
start nodes of the config. For each start node it checks whether there
is an XSD file that matches. If so, the run tool also checks the config
of the start node (if existant). This is done recursively. I.e., also
the child configs of a sub-init of a sub-init of the top-level init
receive a config check.
Issue #2600
Channels, and therefore contexts, may be shared between children
causing corruption when a child is destroyed while another child still
uses the old context within the channel.
related to #2601
In the past, we had the lock of the context we found for the rest of the scope
of pending_signal. Now we use for_each_locked to find the context and the
lock is released as soon as we return from for_each_locked. Thus, we need to
lock the context again before returning it to avoid that the copy constructor
during the return reads values that are currently changing.
Fixes#2532
The missing dissolve of the dummy decorator input component resulted in
problems when using the themed_decorator when repeatedly opening and
closing windows. In contrast to the default decorator, the themed
decorator creates and destroys nitpicker sessions per window.
Added a new constructor that takes the entrypoint as constructor
argument. The original constructor retrieves the entrypoint from the
Genode environment. This does not allow to use a different entrypoint.
Replace former rtt_sec attribute of the <config> tag by more specific
(and still optional) attributes for timeouts used in the NIC router
(these are also the default values):
<config dhcp_discover_timeout_sec="10"
dhcp_request_timeout_sec="10"
dhcp_offer_timeout_sec="10"
udp_idle_timeout_sec="30"
tcp_idle_timeout_sec="600"
tcp_max_segm_lifetime_sec="30">
Details about the new attributes can be found in the README of the router.
Issue #2590
On x86 64 bit with SeL4, the test needs around 80MB that must be
completely composed of 4KB-pages due to current limitations of the SeL4
port. Thus, Core must flush the page table caches pretty often during
the test which is an expensive high-prior operation and makes it
impossible to provide a highly precise time.
