The new VFS OSS plugin utilizes the Record and Play session. For the
time being it is a drop-in replacement for the old plugin and shares
its limitations.
In contrast to the old plugin it is possible to force a client to
use a configured fragment size. Some clients work best with larger
fragments, e.g. VBox, where raising the minimal fragment size is
beneficial.
Please look at the README file for more information.
Issue genodelabs/genode#5167.
On some platforms like qemu/x86_64/sel4, accessing the file system is so
slow that it used to hit the timeout of this phase in the run script.
Ref #5148
This patch lays the selection of the used storage target into the hands
of the config/manager file. By default, Sculpt selects the target by its
built-in heuristics, probing for a Sculpt partition. However, by
specifying a <target> node, one can explicitly select a storage target.
E.g., for using the 2nd partition of the SATA disk connected to port 1
of the AHCI controller, one can now specify:
<target driver="ahci" port="1" partition="2"/>
For selecting the ram_fs as target:
<target driver="ram_fs"/>
The latter case is particularly useful for custom Sculpt scenarios
deployed entirely from RAM. For such scenarios, add two lines to
your .sculpt file:
ram_fs: depot
manager: use_ram_fs
The first line configures the ram_fs such that the depot is mounted
as a tar archive. The second line configures the sculpt manager to
select the ram_fs as storage target. You can find this feature
exemplified in default-linux.sculpt scenario.
build/x86_64$ make run/sculpt_test KERNEL=linux BOARD=linux
It is worth noting that the configuration can be changed at runtime.
This allows for switching between different storage targets on the fly.
Issue #5166
The new 'manager' config allows for the passing of configuration data the
sculpt manager without the need to modify the config/leitzentrale subsystem.
Issue #5166
Unlike the previous return value of
`Genode::Packet_allocator::need_size_for_free()` indicated, it does need
the size of the object it has to free to work properly.
The plugin used to call open with the create flag set at rump without file
permissions for create leading to undefined behavior regarding the file
permissions.
Ref #5148
All errors (as in the legacy version) are now propagated as WRITE_ERR_IO
(see Lxip_vfs_file_handle::write), which ultimately will lead to EPIPE
in libc's socket_fs. This also counts for EAGAIN leading to the fact
that partial writes are not supported for blocking sockets in libc, also
libc will not try a second time in case not all data has been written.
issue #5165
The IP stack checks "user" pointer access, for example, for iov's using
'access_ok' which in turn calls '__access_ok'. The function checks if the
pointer is below TASK_SIZE_MAX, which is usually a big value on 64 bit
systems, but 3GB on 32 bit systems. Because the IP stack is mostly used with
Genode's libc, where pointers on some kernels (base-linux) can be >3GB and we
don't want to make an additional copy of each buffer/iov interacting with the
IP stack, we short circuit the function
issue #5165
This patch replaces the dynamic use of Attached_rom_dataspace by a
new Rom_handler utility, which implicitly covers the initial import of
content (safely using 'local_submit'), the registration of the signal
handler, passes the Xml_node to the handler function (no need to
manually call 'update'), and provides scoped access to the content via a
'with_xml' method. The latter reinforces a programming style that does
not need to copy Xml_node objects.
Issue #5150
This patch removes the remains of the original block-device discovery as
done by the former driver manager. Block sessions are now always
provided by components hosted in the runtime subsytem. The storage node
of the graph is no more.
Issue #5150
This patch harmonizes the driver management between the sculpt manager
and the phone manager by hosting the individual drivers in a new
'Drivers' class with a narrow interface towards 'Sculpt::Main'. The
patch also introduces a clean separation of the 'Board_info' between
features detected at runtime (on PC hardware), statically
known/managed features (phone hardware), and options that can be
toggled at runtime.
With common patterns for managing drivers in place now, this commit
also moves the former runtime/wifi_drv.cc and runtime/nic_drv.cc
code to driver/wifi.h and driver/nic.h. The _drv suffix of the wifi
and nic driver components have been dropped.
Issue #5150
The move of block, USB, and input drivers from the drivers subsystem to
the runtime alleviates the need for routing those sessions between the
subsystems.
Issue #5150
This patch moves SoC-specific framebuffer and touchscreen drivers
(PinePhone) to the runtime subsystem. They are enabled for the
phone_manager.
Issue #5150
As the NVMe driver was the last remaining driver controlled by the
driver manager, this patch removes the 'drivers -> dynamic' subsystem
along with the driver manager from sculpt/drivers/pc.
Issue #5150
This patch moves the AHCI driver from the 'drivers -> dynamic'
subsystem to the runtime, managed by the sculpt_manager. One
implication of this change is the new need to supplement a device
port number to the 'Storage_target', in addition to the existing
label and partition. Previously, each block device was addressed by
merely a label specified for a parent session. The meanings of the
'Storage_target' elements are now as follows.
- The label corresponds to the driver component providing the storage.
- The port is used as block-session label when opening the session
at the driver.
- The partition(s) denote the partition information contained in
the block session.
Components operating as clients of the AHCI driver (e.g., a file system)
refer to their storage target as <label>-<port>.<partition> when a port
is defined (for AHCI). For drivers w/o ports, like USB storage where
each USB-block driver correponds to only one device, the storage target
is denoted as <label>.<partition>. When no partition table is present,
the '.<partition>' part is omitted.
Issue #5150
This commit moves the USB and USB HID driver from the drivers subsystem
into the runtime. The former special USB node of the graph corresponds
now to the USB host-controller driver (named "usb"). The management
options for USB storage devices are available inside this component
node now.
Issue #5150
By moving the event_filter and the numlock_remap_rom from the drivers
subsystem to the static system, the filtering can be applied to drivers
hosted in the runtime and drivers hosted in the drivers subsystem.
This is a preparatory step for moving the USB host and HID drivers to
the runtime.
Issue #5150
Remove the "excellent" idea to re-open /dev/stdout etc. for redirection as
cmake uses open(O_TRUNC) and, thus, truncates log output of outer
redirections.
When the kernel does interrupt remapping, we cannot get a non-remapped MSI
for fault event interrupts. We therefore let the kernel do the fault
reporting in this case.
genodelabs/genode#5066
pci_channel_offline() checks if this member is set to
pci_channel_io_normal (which is 1). The former value of 0 is invalid.
This change fixes pc_nic_drv link down-up in cases that require an e1000
reset.
lx_emul_trace_msg() uses Genode::trace() as message function for
lightweight trace points, but also supports Linux format-string
attributes by using vsnprintf().
Only with high-resolution timers enabled timouts can fire between two
jiffies. The option is enabled on all relevant platforms but
unfortunately disabled by tinyconfig.
This option also permits the use of CONFIG_SND_HRTIMER.
* add testing of trees with minimal and maximal dimensions to tresor_tester.run
* replace tresor_init-local configuration type with simpler and more conformant
configuration type in tresor/types.h that does also XML-parsing and
XML-generation of configurations
* raise min degree to 2 because a degree of 1 is not practical und would
require additional logic
* fix overflow with num_blocks=0 in Superblock_control::Read|Write_vbas
* fix off-by-one bug regarding the number of levels in Vbd_initializer
* improve sanity checks in Tree_configuration constructors
* document level indices in tresor_init/README
* fix size of some arrays in order to be able to handle the maximum number of
tree levels
Ref #5077
* fixes two places, where the free tree module used to continue to process a
request after actually having determined that the request fails
* moves the functionality of checking the hash of a read block and decoding it
to a dedicated method in order to improve readability
Ref #5077
