Because all operations in lxip are non-blocking, return
WRITE_ERR_WOULD_BLOCK for data writes as done by read.
Note: This was not the case in the old plugin because 'write' was blocking
operation there.
issue #5165
These generated dummies slipped in when the commit
'pc_linux: enable gpio, audio' got merged and mainly concern old devices
from the 6xxx series.
The functions are normally guarded via 'CONFIG_IWLWIFI_LEDS' but due to
the olddefconfig step when generating our pc_linux config using
LX_DISABLE has no effect.
Issue #5066.
Allow tweaking the driver selection using the manager config:
- The new attribute 'ps2="no"' suppresses the selection of the PS/2 driver.
- The new attribute 'intel_gpu="no"'suppresses the selection of the
Intel GPU and fb drivers, letting Sculpt fall back to VESA or boot-fb.
Note that the dynamic change of those attributes is handled in principle
but not advisable. E.g., disabling the intel driver after startup leaves
the hardware in a state that the VESA driver cannot cope with. However,
when statically defining the attributes in sculpt/manager/default, it is
now possible to build an image that uses VESA on an intel machine.
Issue #5174
The nightly Qemu tests that don't use KVM require more time for completing the
unlock-and-access phase of the test. If the lock phase starts to early, the
file access is interrupted and the output isn't as expected.
Furthermore, on FOC, the cap quota was insufficient.
Ref #5148
The existing allocation scheme of window IDs has the unwelcome effect
that a re-appearing window would not always result in a visible change
of the window list. In such cases, the layouter and decorator would not
be prompted to do their job. This effect could be observered with the
multi-dialog version of menu view in Sculpt OS when manually enforcing
the restart of the runtime_view. Sometimes the panel would not re-appear
after the restart.
This patch changes the allocation of window ID such that new windows get
fresh IDs instead of reusing an ID of a recently disappeared window.
Issue #5170
Rarely. it might happen that events got received shortly before the complete
set of relevant USB devices got recognized. Filter more output in test metric
to stay robust.
This substantially slims down the test in order to reduce the number nightly
tests that fail due to timeouts. Now, the extended test steps (maximum trees
and benchmarks) are only run on Linux. The synchronous access, snapshot
management, rekeying, and resizing tests were removed.
Ref #5148
This patch replaces the former use of one menu-view component per dialog
by a single menu view presenting all dialogs. This change reduces the
runtime config by about 20%, improves the boot time, and lowers RAM and
CPU usage at runtime.
Issue #5170
The font pointers cached in labels can become dangling when the style
database is updated, as happens when changing the font size dynamically.
This patch orderly updates the cached pointers before removing
out-of-date font entries from the style database.
Related to issue #5170
This patch equips the menu-view component with the ability to present
more than one dialog at a time. The dialogs must be declared in the
<config> node as follows.
<config>
...
<dialog name="settings"/>
</config
For each dialog, menu view requests a dedicated ROM session labeled after
the dialog name. The corresponding GUI session is also labeled as such.
Note that only one hover report is generated responding to all dialogs.
The hover report can be correlated with the hovered dialog by inspecting
the the 'name' attribute of the hover report's <dialog> sub node.
The former global config attributes 'xpos', 'ypos', 'width', 'height',
'opaque', and 'background' have become attributes of the <dialog> node.
Fixes#5170
GPU drivers always reside in the runtime subsystem now.
This patch eliminates the risk of requesting a GPU session at the
drivers subsystem, which never gets established.
Issue #5150
The new VFS OSS plugin utilizes the Record and Play session. For the
time being it is a drop-in replacement for the old plugin and shares
its limitations.
In contrast to the old plugin it is possible to force a client to
use a configured fragment size. Some clients work best with larger
fragments, e.g. VBox, where raising the minimal fragment size is
beneficial.
Please look at the README file for more information.
Issue genodelabs/genode#5167.
On some platforms like qemu/x86_64/sel4, accessing the file system is so
slow that it used to hit the timeout of this phase in the run script.
Ref #5148
This patch lays the selection of the used storage target into the hands
of the config/manager file. By default, Sculpt selects the target by its
built-in heuristics, probing for a Sculpt partition. However, by
specifying a <target> node, one can explicitly select a storage target.
E.g., for using the 2nd partition of the SATA disk connected to port 1
of the AHCI controller, one can now specify:
<target driver="ahci" port="1" partition="2"/>
For selecting the ram_fs as target:
<target driver="ram_fs"/>
The latter case is particularly useful for custom Sculpt scenarios
deployed entirely from RAM. For such scenarios, add two lines to
your .sculpt file:
ram_fs: depot
manager: use_ram_fs
The first line configures the ram_fs such that the depot is mounted
as a tar archive. The second line configures the sculpt manager to
select the ram_fs as storage target. You can find this feature
exemplified in default-linux.sculpt scenario.
build/x86_64$ make run/sculpt_test KERNEL=linux BOARD=linux
It is worth noting that the configuration can be changed at runtime.
This allows for switching between different storage targets on the fly.
Issue #5166
The new 'manager' config allows for the passing of configuration data the
sculpt manager without the need to modify the config/leitzentrale subsystem.
Issue #5166
Unlike the previous return value of
`Genode::Packet_allocator::need_size_for_free()` indicated, it does need
the size of the object it has to free to work properly.
The plugin used to call open with the create flag set at rump without file
permissions for create leading to undefined behavior regarding the file
permissions.
Ref #5148
All errors (as in the legacy version) are now propagated as WRITE_ERR_IO
(see Lxip_vfs_file_handle::write), which ultimately will lead to EPIPE
in libc's socket_fs. This also counts for EAGAIN leading to the fact
that partial writes are not supported for blocking sockets in libc, also
libc will not try a second time in case not all data has been written.
issue #5165
The IP stack checks "user" pointer access, for example, for iov's using
'access_ok' which in turn calls '__access_ok'. The function checks if the
pointer is below TASK_SIZE_MAX, which is usually a big value on 64 bit
systems, but 3GB on 32 bit systems. Because the IP stack is mostly used with
Genode's libc, where pointers on some kernels (base-linux) can be >3GB and we
don't want to make an additional copy of each buffer/iov interacting with the
IP stack, we short circuit the function
issue #5165
