Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
With this patch, sculpt uses init's heartbeat-monitoring mechanism to
detect the failure of part_block instances during storage disovery.
If part_block gets stuck, the device is released and can thereby
be accessed at the whole-device level.
Issue #3861
The check prevents the Ttf_font from violating the bounding box in the
presence of very small scale values. This can happen during the startup
of Sculpt. Before the framebuffer driver is up, Sculpt bases its dynamic
font-size setting on a screen resolution of 1x1.
Issue #3812
The sculpt manager used to defer the initialization of the GUI until
nitpicker's first display report became ready. This way, Sculpt was able
to run headlessly even if the framebuffer driver failed to start up.
Thanks to #3827, nitpicker no longer depends on a working framebuffer
driver. So the sculpt manager is safe to rely on nitpicker in any case,
simplifying the code.
Issue #3827
* enable all common warnings through default value of CC_ADA_WARN
* treat warnings like errors through default value of CC_ADA_WARN_STRICT
* enable almost all style checks through default value of CC_ADA_WARN_STRICT
* style fixes for aes_cbc_4k
* disable strict warnings and style checks for libsparkcrypto and spark lib
Ref #3848
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
This commit fixes the 'Out_of_caps' handling. The previous version
mistakenly upgraded the RAM instead the caps as response. The problem
could be triggered by the 'decorator_stress.run' script.
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
If a "cat" tool as simple as the removed one is needed, it should be
implemented with Goa, only depend on libc/posix (*not* base), and be
named "simple_cat". Up to today, the misleading naming of the removed
tool, tricked me into believing "test-pipe" tests POSIX pipes, which it
did not!
The 'WHITESPACE' case of the _calc_len method wrongly accessed the
character before checking upper bound of the token. The problem is fixed
by switching the order of both conditions.
Fixes#3756
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
- don't use 'qemu -serial mon:stdio' anymore as it no longer works as
expected
- use "bash -l" with [terminal] to read user's profile configuration,
e.g., PATH settings
- added missing boot modules and cap quotas
config_0.xml.tmp:26: element config: Schemas validity error :
Element 'config': Character content other than whitespace is
not allowed because the content type is 'element-only'
Issue #3612
This patch increases the default limit of the maximum number of open
file descriptors to the hard limit of the system. This is needed for
complex scenarios, which require more FDs than the default of 1024
at core.
Related to issue #3581Fixes#3721
This commit fixes a regression introduced by "window_layouter: add
dynamic screen handling", rendering the sub-division of screens in
columns and row unusable. The said commit removed a condition needed
for the correct window placement. This patch restores the condition.
Issues #3646
When the last writer closes the pipe, we must trigger the I/O progress
handler to deliver the final EOF to the client (READ_OK with out count
of 0).
Fixes#3697
This patch replaces the former Noux instance by a sub init that hosts
the combination of VFS + fs_rom + bash. If bash exits, the whole sub
init exits, which implicitly tears down the terminal session used by the
sub init. The latter is expected by the test sequence.
Issue #3696
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
This patch increases the Sculpt version to avoid the risk of binary
compatibility clashes with index files published for the just-released
Sculpt 20.02 version.
Without this patch, the text area would mistakenly delete the characters
types after placing the cursor with the mouse as soon as shift is used
as modifier.
- Don't reset sculpt partition on USB changes whenever ram fs is
selected for use.
- Reconfigure runtime immediately when plugging USB devices.
This prevents the usb-block driver and part_block from
dangling in the graph. They disappear immediately now.
This patch restores the anchoring of the popup menu to the original
behavior, placing the popup to the right of the '+' button. The
anchoring got lost due to the recent structural changes of the GUI,
which affect the hover XML structure.
Be less rigid when checking for available network to support
setups where the uplink or depot repositories are provided by
another source than "wired" or "wifi" NIC services,
e.g., a virtual machine with pass-through network device.
The new text_area component is able to view and edit files.
Internally, it employs a menu_view for the graphics output.
Only basic notepad-like text-editing functions are supported.
At the current time, it is solely meant as a companion of the Sculpt
manager.
Issue #3650
This patch improves the robustness of menu_view when encounting missing
textures, which can happen during development when using styled buttons
and frames. With the patch, menu_view outputs diagnostic messages,
pinpointing the problem.
The patch also updates the texture handling to use the 'File_content'
utility and the VFS for obtaining PNG images.
Issue #3629
This patch allows for the customization of the text color and alpha
value of the label widget by the means of a style-definition file.
The mechanism is exemplified with the new "invisible" label style
that sets the alpha value to zero.
Issue #3629
This commit adds dynamic switching in between different defined
screens via keyboard shortcuts, or by editing the rules file.
In the window_layouter package it defines per default ten screens,
reachable by pressing the screen key along with numbers 0-9.
Fix#3646
This new attribute can be used to enforce a minimum width in the unit of
the size of the character 'x'. Furthermore, the patch sets the minimum
height of a label to 0 if no 'text' attribute is present. By combining
both features, the label becomes usable as a horizontal spacer.
Issue #3629
This patch refines the hover handling such that a float widget never
responds to hovering unless a child is hovered. This way, it becomes
possible to stack multiple float widgets within one frame and still
reach all child widgets.
Issue #3629
Similarly to the way of how a <cursor> can be defined for a <label>
widget, a selection can be expressed as follows:
<label ...>
<selection at="2" length="12"/>
</label>
Issue #3607
Issue #3629
When setting the <dialog> attribute 'hover_details' to "yes", the hover
report features the character position of a hovered label.
Issue #3607
Issue #3629
This patch equips the label widget with the ability to display a text
cursor, as illustrated by the following example:
<label text="...">
<cursor at="10"/>
</label>
Issue #3607
Issue #3629
The value range supported by the 'Animated_rect' utility is constrained
to 2^11 by the used 32-bit integer type. The interpolation is performed
on fixpoint numbers with a fractional precision of 10 bits. The
non-linear interpolation as performed by the 'Lazy_value' utility
involves squaring the values. Hence, the interpolated integral values
must not exceed 2^11 (2*11 bits for the square plus 10 bit for the
fractional part require 32 bits). This range is too small for
high-resolution displays. Hence this patch replaces the 32-bit integer
type by a 64-bit integer type.
Fixes#3627
The wm used to remember the last pointer position when observing a leave
event. With such a stale pointer position, the wm would eventually
wrongly create an artifical motion event when a supposedly hovered
window changes its position (during an animated move). This can lead to
the propagation of the stale pointer position to the wm client, which,
in turn, may interpret the outdated position (e.g., the menu view would
report a wrong hover state).
This patch removes the stale state by resetting the '_pointer_pos' when
observing a leave event.
Fixes#3632
Instead of listening for new TCP/IP connections only,
the TCP terminal connects to a server when an IP address is
configured in the policy for a terminal client.
Fix#3619
Replace return values with appropiate bool and document two-staged
publickey authentication. This fixes a bug where wrong authentication
attempts are not properly denied.
Issue #3590.
server.h:51:12: warning: ‘int write_avail_cb(socket_t, int, void*)’
declared ‘static’ but never defined [-Wunused-function]
This patch fixes the warning by moving the user of 'write_avail_cb' to
the compliation unit that defines it.
From the man page of expect:
> Both expect and interact will detect when the current process exits
> and implicitly do a close. But if you kill the process by, say, "exec
> kill $pid", you will need to explicitly call close.
Fixes#3569
This patch is a follow-up fix for "ttf_font: prevent out-of-bounds
access", which produced sporadic single-pixel artifacts with large font
sizes, e.g., with the monospaced font set to 24px in Sculpt.
The artifacts occurred only for some horizontal sub-pixel positions, in
combination with the font cache, and after the rendering of '>'
characters. They were ultimately caused by the missed clearning of the
first pixel of a glyph where x0 is 1 (e.g., the character 'd'). In this
case, a pixel from the previously evicted cache entry (the '>') shined
through. The patch fixes the problem by clearing the glyph starting from
the first, not the x0's, pixel.
Fixes#3567
This test covers the situation where depot_query evaluates depot content
that is incompletely extracted. In particular, if the 'archives' file
already exists but has a size of zero, depot_query would produce a
page fault. This situation can be manually provoked by deliberately
creating a zero-sized archives file for any otherwise correct pkg.
This patch also fixes the success indicator of the test. It wrongly
matched an early line of the log output.
Issue #3557
* The log history of a test is stored as a whole for the lifetime of the test.
* Matching of the log history against log patterns is done correctly now
(previously, a pattern like "AAB" on an input like "AAAB" wouldn't have
triggered).
* Use memcmp, memcpy, memmove instead of the former character-wise operations.
* Sanitizing of log input and log patterns now works more generic through the
new Filter class for all replacements/removals.
* Sanitizing is done as soon as a string is available and remains for the
lifetime of the test.
* Sanitizing doesn't interfer with the matching algorithm.
* Decomposing into small clearly named functions.
Ref #3555
When copying config/managed/deploy to config/deploy, the latter may
temporarily result in an empty configuration. Such an intermediate
state should be ignored to keep the currently running scenario in tact
instead of restarting it.
Add a new plugin for creating pipes between pairs of VFS handles. It is
intended to replace the libc_pipe plugin, one of the last remaining libc
plugins.
In contrast to the libc_pipe plugin, this plugin defers cross-handle
notification until I/O signal handling rather than block and unblock
readers using a semaphore. This is a performance regression in the case
of multiple threads blocking on a pipe, but shall be an intermediate
mechanism pending renovations within the libc VFS and threading layers.
As a side effect, threads blocked on a pipe might not be resumed until
the main thread suspends and dispatches I/O signals.
The "test-libc_pipe" test has been adjusted to use the VFS pipe plugin
and tests both local pipes and pipes hosted remotely in the VFS server.
Merge adaptations (such as EOF handling, adjustment to VFS/libc
interface changes) by Norman Feske.
Fix#2303
Nowadays, we use standard command-line tools like vim to edit init
configurations dynamically, which alleviates the need for a custom CLI.
The CLI-monitor component was too limited for use cases like Sculpt
anyway.
The patch also removes the ancient (and untested for long time)
terminal_mux.run script, which used to be the only remaining user of the
CLI monitor.
Issue #3512
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
Moving the handling into the input-session clients enables more
sophisticated implementations (like Qt5) to apply key-symbol based
handling of those modifiers like correct CTRL-A with QWERTY and AZERTY
layouts and distinction of CTRL-J and Return.
Issue #3483
With the added modification-time support in the libc, the extract tool
requires a timer session, which is not plausible for the purpose of the
program.
This behavior stems from the fact that the libc implicitly writes the
mtime when closing a written file. For this update, it implicitly calls
'clock_gettime', which in turn initializes the timer subsystem within
the libc (creating a timer session).
For the extract tool, the implicitly updated mtime is useless because
the extract tool overwrites this modification time with the mtime stored
in the archive anyway. However, the dependency from a timer service
remains.
This patch explicitly disables the libc's implicit updating of the
file-modification when closing a written file.
Issue #1784
This adds complete character-generator configurations for English (US),
German (Germany and Switzerland), and French (France and Switzerland).
The configs are manually amended and stripped-down versions of
xkb2ifcfg generated configs.
Issue #3483
This patch handles the situation where the usb_block_drv exits for any
reason, in particular when the driver fails to initialize the device. In
such cases, the usb_block_drv used to stay stale in the system,
effectively preventing the device from being passed to a VM. With the
patch, the USB storage device gets flagged as failed, the usb_block_drv
is removed from the runtime, and the condition is reflected at the user
interface.
This situation occurred on the attempt to access an iomega zip drive
with a version of the usb_block_drv without support for the START-STOP
command, but it may potentially also occur in other circumstances.
Fixes#3468
This commit implements the ssh exec channel request. It also handles
some shortcommings on the interactive channel like exit and concurrent
session establishments.
Pipes into the channel do not work yet. E.g.:
echo foobar | ssh noux@localhost -p 5555 "cat > /rw/test.txt"
The issue described with FIXME in Ssh::Server::incoming_connection()
could not be reproduced and might have been fixed with the improved
file descriptor handling.
Fixes#3401
To enable the clipboard for a VM, add the following node to the
<Hardware> sub node of your machine.vbox configuration:
<Clipboard mode="Bidirectional"/>
Issue #3437
The triggering of a new depot query can happen more than once per
activation of the sculpt manager if multiple conditions call for updated
information about the depot. When this happens, the depot-query
component produces intermediate results, which are not consumed by the
sculpt manager. By deferring depot queries for a few milliseconds, we
avoid such intermediate queries, relieving the workload of the
depot-query component at system boot time.
Issue #3436
The diagnostic messages presented in the runtime dialog lacked the name
if the subsystem was created from a launcher, e.g., the 'vm'. Instead of
determining the subsystem name from the start-XML-node (a launcher has
no 'name' attribute but the name corresponds to the launcher's file
name), the name is now passed as a dedicated argument.
The labels of clipboard ROM and clipboard report sessions of WM clients
must be consistent with the client's nitpicker label. Hence, we must
route those sessions through the window manager, analogously to the
approach taken for shape reports in #3165.
Issue #3437
This patch introduces two caches to the depot-query tool.
- A stat cache remembers the results of 'Directory::file_exists'
calls.
- The 'Cached_rom_query' caches the result of scanning the depot
for a given ROM module and pkg path. To elminates the need to
parse 'archive' files of pkgs referenced from other pkgs or
for the repeated instantation of the same pkg.
Both caches are bypassed whenever referring to the 'local' depot user.
Fixes#3427
When resizing windows of clients that respond very slowly to resize
requests, the window's size sometimes snapped back to its original size
immediately after finishing the drag operation.
The problem was caused by the interplay of the layout rules (obtained
via the 'rules' ROM, generated by the 'rules' report) and the
temporary interactive state that occurs during drag operations.
The rules are updated only at the time of releasing the button to keep
the overhead while dragging the window low. However, when releasing the
mouse, the (now outdated) rules kicked back into effect, triggering
resize requests for the window to its old size.
The patch solves this problem by decoupling the dragged state of a
window from the physical release of the button. The button release
triggers a transition from a DRAGGING to a SETTLING state and programs
a timer. In the SETTLING state, the windows behave as in DRAGGING state,
giving the interactive geometry precedence over the rules-dictated
geometry. During this state, further responses of window-resize requests
may come in and are handled like dragging was still in progress. After a
timeout, however, the current window layout is conserved as a new rules
report and the state goes back to IDLE.
For clients that takes a very long time (in particular, VirtualBox when
resizing the desktop, which takes sometimes multiple seconds), the
snap-back artifact can still occur, but the effect is reduced.
This problem surfaced with the new tool chain that changes the stack
layout. A pointer to the the config XML data was kept in the main object
but pointed to a stack variable. This patch fixes it by removing the
pointer.
Fixes#3416
This patch adds the missing propagation of the maximized state from the
layout rules to the internal representation of a window. Without this
patch this state could be toggled by clicking on the maximizer button
only.
The decorator's detection of the hovered window element was inaccurate,
which resulted in "jumping" windows in some situations, ultimately
caused by a combination of three different mechanisms.
First, when moving the pointer into the area of a window, the decorator
would detect the hovering of the left border whenever the distance of
the pointer from the border was less than the half of the theme texture
(e.g., 64x64 pixels for the default theme). However, if the left border
margin is set to a small value (e.g., 1), there is an overlap of the
sensitive resize border area and the content. Hence, chances were quite
high that - when moving the pointer from the left into the window - the
hover report would contain the hovering of the left border.
Second, the window manager tries to hide pointer movements from the
decorator if possible. It informs the decorator of the pointer position
if any decoration is hovered or if a new window is hovered. But it does
not expose pointer movements within a window to the decorator. For this
reason, the decorator would not update the hover report as long as the
pointer stays within a once hovered window. In the situation described
above, the hover report would still contain the stale information about
the hovering of the left resize border.
Third, when the user clicks on the window, the decorator examines the
most recent hover report and - in the situation described above - finds
the left border hovered. Consequently, it initiates a window-drag
operation. While resizing the window with the left border, the window
layouter pins the right border of the window to its current position.
All window-size changes of the client will be applied towards the left
(dragged) border. In the case of the top view, which continuously
resizes the window by itself, the window would "jump". In reality, it
actually tries to respond an interactive resize operation. The window
layouter cannot guess that the client is not responding to window
layouter's resize request but is acting independently.
This patch fixes the jumping window problem for the case where the
pointer hovers the overlapping area of the resize border and the
content. However, when trying the to interactively resize the top window
via the bottom-left corner, the "jumping" can still be observed.
Fixes#3303
By decoupling the leitzentrale from the (contended) boot CPU, the fading
on F12 interferes much less with animations like nano3d deployed in the
runtime.
Fixes#3268
There are still nightly tests like test-tcp_bulk_lxip on sel4 x86_64 qemu
that manage to hit the test timeout of the run script although the test was
successful. So, raise the extra time added by the run script to 30 seconds.
Ref #3411
Some platforms (sel4 imx6/imx7) cannot manage to execute all tests in a single
boot. Thus, we re-boot them periodically after a given maximum number of tests
to avoid that arbitrary tests always fail due to the long uptime and not due to
the tests themselves.
If the maximum number of tests is set to 0, no limit is applied.
Fixes#3411
The terminal now got a configurable palette for 16 colors (8 normal, 8
bright/bold).
<config>
<palette>
<color index="0" value="#000000"/> <!-- black is real black -->
<color index="8" value="#101010"/> <!-- bright black stands out a bit -->
</palette>
</config>
Note, the old (undocumented) <color index="..." bg="..."> configuration
scheme is no longer supported.
Also, this commit adds a pleasing default palette that ensures
readability of ViM's standard hightlighting.
Fixes#3406
It might happen, in CPU intensive tests (like TCP bulk lxip), or when
printing debugging output after a failed test (as done currently on
staging), that the run script on the host gives up and reboots the
platform too early. Thus, we raise the buffer time. A reboot should
be necessary only in rare cases anyway.
Fixes#3387
* Make package buildable for ARM too
* Move usb library to src targets for explicitly named targets
* adapt remaining run-scripts to use the correctly named usb drivers
Ref #2190
This patch fixes the corner case where an animated geometry changes its
destination mid-way while an animation is already in progress. The
'_trigger_animated_geometry' method used to back out early in this case,
which was intended as an optimization.
Fixes#3296
This enforces the use of unsigned 64-bit values for time in the duration type,
the timeout framework, the timer session, the userland timer-drivers, and the
alarm framework on all platforms. The commit also adapts the code that uses
these tools accross all basic repositories (base, base-*, os. gems, libports,
ports, dde_*) to use unsigned 64-bit values for time as well as far as this
does not imply profound modifications.
Fixes#3208
As a preparatory step for introducing the new block-client API, we have
to turn the 'Block::Connection' into a class template. The template
argument will be used to tie an application-defined job type to the
block connection.
Issue #3283
This patch replaces the formerly fixed 2 KiB data alignment within the
packet-stream buffer by a server-defined alignment. This has two
benefits.
First, when using block servers that provide small block sizes like 512
bytes, we avoid fragmenting the packet-stream buffer, which occurs when
aligning 512-byte requests at 2 KiB boundaries. This reduces meta data
costs for the packet-stream allocator and also allows fitting more
requests into the buffer.
Second, block drivers with alignment constraints dictated by the
hardware can now pass those constraints to the client, thereby easing
the use of zero-copy DMA directly into the packet stream.
The alignment is determined by the Block::Session_client at construction
time and applied by the Block::Session_client::alloc_packet method.
Block-session clients should always use this method, not the 'alloc_packet'
method of the packet stream (tx source) directly. The latter merely
applies a default alignment of 2 KiB.
At the server side, the alignment is automatically checked by
block/component.h (old API) and block/request_stream.h (new API).
Issue #3274
This patch modernizes the 'Block::Session::info' interface. Instead of
using out parameters, the 'init' RPC function returns a compound 'Info'
object now. The rather complicated 'Operations' struct is replaced by
a 'writeable' attribute in the 'Info' object.
Fixes#3275
The 'aes_cbc_4k' library is simple wrapper around libsparkcrypto to
serve as a backend for storage encryption. It operates on data chunks of
4 KiB and uses AES-CBC while incorporating the block number and the
private key as salt values.
Replace the I/O response handler that is passed to the VFS at
construction with an object that is dynamically attached to handles.
This object shall also accept read-ready notifications, and plugins are
encouraged to keep handles awaiting ready-ready notifications separate
from handles that await I/O progress.
Replace the use of handle lists in plugins with handle queues, this
makes the code easier to understand and the ordering of notifications to
the application more explicit.
These changes replace the use of the Post_signal_hook from all VFS
plugins, applications must assume that read-ready and I/O notifications
occur during I/O signal dispatch and use an Io_progress_handler at its
entrypoints to defer response until after signal dispatching.
Fix#3257
The '_currently_constructed' pointer caches the information about which
'Launched_child' is currently configured in the menu. When discarding
the runtime (e.g., when un-using a file system) at this point, this
cached pointer was not invalidated while all 'Launched_child' objects
would be freed (including the currently constructed one). On the next
attempt to construct a new child, the sculpt manager attempted to
destruct the 'Launched_child' referred by the (now outdated)
'_currently_constructed' again.
Fixes#3240
This commit handles the corner case where a package could be installed
successfully but the package's runtime definition is inconsistent with
the content delivered by the package's dependencies, i.e., the <content>
of the runtime file lists ROM modules that do not exist.
With this patch, the '+' menu shows the message "installed but
incomplete" whenever a package is in such a state.
Issue #3241
The "Vfs::Vfs_handle" type should not contain any public members that
can be initialized by the VFS internally and by the application, so
remove inheritance from the "Genode::list::Element" class. The VFS
plugins must instead use lists of "Vfs::Vfs_handle" sub-classes, the
lifetime of which are always managed by the plugin.
Ref #3036
It turns out that the commit "window layouter: allow floating apps to
resize" interplays badly with the interactive toggling of the maximize
state of windows. In contrast to the window geometry and stacking, which
is always updated through the rules-feedback mechanism, interactive
changes of the maximize state omitted this loop and instead took a local
shortcut. Because of this shortcut, the maximized geometry eventually
ended up as window size in the window's assign rule. So unmaximizing the
window failed to revert the geometry to its original state.
This patch removes this inconsistency. The maximize state adheres to the
official chain of commands through the rules mechanism now. The state is
now maintained internally without affecting the window's geometry and is
evaluated while generating the window layout only.
As a minor loosely related improvement, this patch prevents the
highlighting of resize handles for non-resizable windows.
Issue #3200
This patch improves the transition from an interactive window geometry
change (dragging a window element) to the point where the resulting
new layout rules come into effect. During this short time, no resize
request must be issued because such a resize request would be based on
stale rules.
Fixes#3227
This is a follow-up commit to "Update <provides> info in pkg runtimes",
which adapts the users of the wm pkg to the changed label of the "focus"
nitpicker session.
This patch gives applications the ability to control the size of their
window whenever the window is floating, not tiled or maximized. See the
comment in the code for the rationale.
Fixes#3200
The default rate of 100 ms keeps Sculpt too busy because the menu that
displays the percentage values is drawn completely on each update.
Limiting the rate to 1/4 seconds relieves the effect.
By clicking on a yellow checkbox in the depot selection dialog, the
corresponding index files are removed. This way, index files can
be update by removing and downloading them again.
This patch also filters out sculpt-managed components from the graph to
avoid erratic graph-position changes while the '+' menu is open.
Fixes#3193
The fs_tool component performs file operations according to its
configuration. This initial version implements only the operation
<remove-file> as needed for Sculpt CE.
Issue #3222
Issue #3193
This patch refines the criterion of when the networking is considered as
ready to use. Until now, any IP reported by the NIC router was taken as
an indicator for connectivity. But as the NIC router reports an IP
0.0.0.0/32 when no network cable is plugged at the uplink, the condition
was too loose.
This patch improves the error handling of depot-download manager for the
case where a download is requested but the corresponding software
provider information is absent from the depot. Without this patch, the
update mechanism would get stuck in the failed depot-query step and
won't attempt to perform subsequent download jobs.
Fixes#3224
The storage dialog is folded when activating the runtime view (e.g., by
clicking on the Genode Logo). This should happen immediately as response
of the mouse click.
This patch improves the separation of the update and layout phases to
avoid superfluous geometry animations of its child widgets. Prior this
patch, 'Widget::geometry' was called in both phases, potentially
triggering geometry animations with intermediate values at the update
phase.
Related to issue #3221
The button widget already supported an animated transition between
hovered and unhovered states. This patch generalizes the mechanism to
allow animated transitions between arbitrary button states, including
style changes.
This way, the fade-out of non-TCB components in Sculpt CE happens not
abruptly but smooth.
Fixes#3221
The default 'Rect' constructor constructs an invalid rectangle where the
p1 coordinates are lower than the p2 coordinates. In particular, p1 is
set to (1, 1). The 'Widget' implementation uses the points individually
as input into the 'Animated_rect' mechanism. This way, widgets end up
being positioned at (1, 1) initially and are moved to (0, 0) once the
first layout update is applied. By explicitly initializing the
'_geometry' to (0x0+0+0), we avoid this initial artifact.
When entering/leaving sub menus of Sculpt's '+' menu, some parts of the
menu sometimes remain unchanged, in particular the back button.
Originally, a click would reset the hovering on clicks in the
expectation that any click would eventually result in a completely new
situation where the old hovering information does not make sense and
would only (potentially) confuse the menu. But this was apparently
overzealous. With the patch a once hovered back button stays hovered
even when actitivated and the back button of the upper-level menu
happens to stay under the current pointer position.
Issue #3209
This patch improves the hover handling in situations where the dialog
changes under the pointer. Previously, hover changes were reported
as response to user input only, which failed to cover this case. This
became a problem with Sculpt CE's '+' menu, which changes on the fly
when entering/leaving sub menus.
The patch also cleanly separates the hover handling from the focus
handling. Originally, the hovering was reset when the menu view got
unfocused. In situations like Sculpt's '+' menu where the menu view
receives a transient focus only while clicked and gets unfocused on the
button-release event (aka clack), each clack would invalidate the hover
information until a new input event comes in.
Finally, the patch introduces the clear distinction between situations
where the entire dialog is hovered or not. Previously, this state was
somehow implicitly kept by issuing an invalid hover report whenever a
leave event was observed.
Issue #3209
When a window is moved, the virtual pointer position must be updated,
taking the changed input coordinate into account. This patch propagates
such changes via absolute motion events to the client.
Without this patch, Sculpt CE's '+' menu wouldn't update the hovered
item correctly when entering/leaving sub menus (which happen to trigger
the repositioning of the menu on screen).
Issue #3209
When specifying the attribute 'dep_visible="false"' for a primary
dependency or the attribute 'visible="false"' for a secondary
dependency, the dependency is used for the layout calculation but not
displayed in the graph.
- Omit showing routes to uninteresting ROMs obtained from the parent,
i.e., the binaries requested by the sculpt-managed subsystems.
- Change the routes for the inspect subsystem such that the inspect-noux
instance is anchored at the config node (critical!) and the nit_fb
instance anchored at the used GUI.
This patch excludes the current "Construction" from the list of
"present" components in the runtime. Without the patch, a missing "wm"
would go unmissing once when the routing dialog of a new wm instance
appears. Now an already present window layouter that had a broken route
would prematurely re-appear in the config, which should not happen
because the new wm does not exist yet.
When buiding the sculpt image, the sculpt.run script used to integrate
the current version of the index of the 'depot_user' into the boot
image. At runtime, when the Sculpt partition is selected for "use" this
index - along with the 'pubkey' and 'download' files of the known
depot users - is written to the Sculpt partition.
This has the undesirable effect that a later version of the index
(published some time after the sculpt image was created) would always be
overwritten by the outdated index shipped with the boot image.
The built-in default index was actually a stop-gap solution needed
during the development of Sculpt CE, introduced when the downloading of
index files was not yet supported. Now, with the working download
mechanism, it is no longer needed. Hence, this patch removes the default
index from the sculpt image.
This commit removes most of the default launchers, which are now
superseded by the interactive component addition feature of the '+'
menu.
We keep the chroot components because we cannot easily create chroot
instances interactively yet.
The usb_devices_rom is still needed because its configuration is meant
to be edited at runtime.
It also adds a 'themed_wm' launcher to make the initial sculpt
experience easier. For knowledgeable users, the index contains all
ingredients needed to build a multi-component window manager manually.
This commit turns the '+' menu into a tool for the following tasks:
- Selecting and downloading of depot index files
- Browsing of the hierarchical depot index files
- Installation of packages found in the index files
- Interactive routing configuration of a selected package
- Deployment of configured component
Sculpt used to restrict the size of leitzentrale windows to the screen
area that is not obstructed by the menu and log. This is useful for the
runtime view and the inspect window. However, the menu should be allowed
to use the entire screen because it overlays the other content.
Before this patch, the menu wouldn't be displayed completely on small
resolutions (e.g., 1024x768 when using the VESA driver) because the log
at the bottom of the screen imposed the size constraint on the menu.
With the patch, the menu is able to overlay the log window.
This patch enhances the runtime view such that not only immediate
dependencies but also all transitive dependencies of the selected
component are displayed. This way, the graph nicely reveals the
trusted computing base of the selection.
Instead of parsing the runtime's configuration each time when generating
the graph dialog (e.g., when changing the hover state), extract the
relevant information only on configuration changes.
The runtime view, launcher query, and depot query increase the
complexity of the graph without providing a tangible value to the user.
This patch omits those components from the runtime view to make the
graph less confusing.
Append "..." to button labels whenever the button does not perform an
immediate action but merely toggles user-interface elements. This
tells the user that the button can be pressed without risk.
With this commit, the 'installation' input of the depot-download
subsystem accepts <index> nodes in addition to <archive> nodes. Each
index node refers to one index file specified via the 'path' attribute.
This commit also improves the tracking of failure states. Once an
installation job failed (due to a download of verification error),
it won't get re-scheduled. In the past, such failure states were not kept
across subsequent import iterations, which could result in infinite
re-attempts when an installation contained archives from multiple users.
The the progress of the download process is now reflected by the
"progress" attribute on the download manager's state report, which
allows the final report to contain the list of installed/failed archives
along with the overall progress/completed state. The detection of the
latter is important for the sculpt manager for reattempting the
deployment of the completed packages.
The patch enhances the depot_download.run script to stress the new
abilities. In particular, the scenario downloads a mix of index files
(one present, one missing) and archives, from two different depot users
(genodelabs and nfeske).
Issue #3172
The input for the pkg index is located at gems/run/sculpt/index.
The sculpt.run script uses this input for generating the depot index
file at depot/<user>/index/<version>.
The tool/depot/publish tool support arguments of the form
<user>/index/<version> where <version> corresponds to the Sculpt
version.
Issue #3172
This prevents the situation where the user has booted the system, has
not yet selected a storage target to "use" for Sculpt, yet clicks on the
'+' menu. Such clicks show no immediate response because Sculpt cannot
know where to deploy the selected package. But since the user is not
guided towards resolving this prerequisite, it's better to not present
the menu in the first place. The '+' appears as soon as a storage target
is selected for "use".
This error message may occur during the startup of a multi-component
application when the very first dialog is generated just after the menu
view is ready. It is not an error.
This commit adds the following styles:
button/enter - for entering a sub menu
button/back - for returning from a sub menu
button/radio - for picking one item of a list
button/checkbox - for making a selection
frame/transient - for temporary GUI elements
This message is diagnostic, but also occurs in legitimate situations
such as the wm in Sculpt's Leitzentrale where the focus is managed
completely outside the wm.
The zynq nic_drv also depends on hw, we therefore adapted the folder
structure for clarity. Also renamed the binary to 'zynq_nic_drv' to
prevent conflicts and to allow removing the cadence_gem spec.
Issue #3179
This patch simplifies the propagation of pointer shapes from
window-manager clients to the pointer. The "shape" report is routed to
the wm server, which, in turn, reports it to the pointer. This way, the
pointer can easily correlate the label of the application's "shape"
report with the label of the application's Nitpicker session. The
formerly used manual rewriting of the "shape" label is not needed
anymore.
Since the wm server provides a "Report" service now, its <provides>
declaration must cover "Report" in addition to "Nitpicker" to avoid
runtime error messages. Vice versa, the wm is now expected to request
"shape" reports, which should be routed to the pointer (using the
'label_last' routing attribute).
Fixes#3165
Refactor the graphical terminal server to internally represent
characters as 16-bit codepoints and handle the duplex terminal stream as
UTF-8.
- Make the Codepoint class printable to the Output interface
- Decode data received at the Terminal session from UTF-8 to a 16-bit
character
- Pass 16-bit characters through terminal decoder and char-cell arrays
- Send Unicode through terminal session in a burst of UTF-8 bytes
Fix#3148
The minimal-footprint Ada runtime for implementing library-like
functionality in SPARK is now called "spark" runtime.
The full Ada runtime for entire components written in Ada and using the
libc as glue to the underlying system will move to the world repository
as "ada" runtime.
Issue #3144
The 'run_genode_until' procedure only called 'run_power_on' to reset
the target machine. That works will with the softreset module, which
is used by all x86-based test system but falls short regarding ARM
boards. The way those boards are connected requires turning the power
off and on for a complete cycle.
The situation where a 'Session_policy' is constructed for a label with
no matching policy is in almost all cases a configuration problem.
A diagnostic message eases pin-pointing such mistaks. By adding the
message to the 'Session_policy', servers don't need to manually handle
the exception to provide diagnostic information. This simplifies the
server code in many components.
In less interactive mode, the run script doesn't give up on missing test
archives but instead removes the corresponding tests and marks them "missing".
This mode avoids total failure of a platform in automated test infrastructures
when only a few archives are missing.
Fixes#3120
After a certain number of tests, presumably some resource in core is exceeded
and loading the successive test fails. This quickfix looks out for the
characteristic Core error and then reboots to avoid that all successive tests
are marked as failed.
Since the timer and timeout handling is part of the base library (the
dynamic linker), it belongs to the base repository.
Besides moving the timer and its related infrastructure (alarm, timeout
libs, tests) to the base repository, this patch also moves the timer
from the 'drivers' subdirectory directly to 'src' and disamibuates the
timer's build locations for the various kernels. Otherwise the different
timer implementations could interfere with each other when using one
build directory with multiple kernels.
Note that this patch changes the include paths for the former os/timer,
os/alarm.h, os/duration.h, and os/timed_semaphore.h to base/.
Issue #3101
This patch improves the appearance of the leitzentrale by eliminating
the (hardly visible) decorations from the GUI and graph views, and by
animating the motion of the graph position. The latter is meant to
remove the stuttering effect when the graph's size changes (and
re-centered).
This patch improves the consistency of the hover handling after
finishing a drag operation. Normally, the window manager hides pointer
updates while the user is performing a drag operation with the mouse
from the decorator. However, in the special case where a drag operation
results in a window-layout change, the decorator's hover model may be
affected. Hence, the window manager must supply the current pointer
position when leaving the drag state.
Issue #3097
This patch supplements the dragging state of window controls to the
window layout so that decorators become able to visually reflect this
state, i.e., pressing the title bar while moving a window.
Issue #3097
This commit adds the optional 'motion=<number>' attribute to the
decorator's <policy> nodes. The default value is 0. If a value higher
than 0 is specified, window-geometry changes are applied as an animation
where the <number> denotes the number of animation steps.
Issue #3096
This patch adds the boolean policy attribute "decoration", which
controls whether window decorations are presented or not. It is enabled
by default. By setting the attribute to "no", matching windows appear
without any border, which is desireable for Sculpt's component graph.
Issue #3096
This patch improves the window decorators in the following respects:
* Strict warnings are enabled now.
* The use of the 'List_model' makes the application of window-
layout changes more robust. This is particularly the case for
the restacking of windows.
* Display-mode changes are now supported by both decorators.
Issue #3094
Until now, decorators used to rely only on the TO_FRONT command for
propagating the window stacking to nitpicker. However, as the additional
use of the TO_BACK command allows for a more robust procedure, this
patch enhances the wm to handle both view stacking commands.
Issue #3094
Adds an config attribute to the Depot Autopilot component:
:<config repeat>:
Can be one of
"false" - process the given test list only once,
"until_forever" - endlessly repeat processing the given test list,
"until_failed" - repeat processing the given test list until it fails.
Adds an environment variable to the Depot Autopilot Run script:
:TEST_REPEAT:
Same as the <config repeat> attribute of the Depot Autopilot.
This is useful when having to debug very sporadic errors during one test
or a series of tests.
This ensures that the depot_autopilot.run script, when exiting, always prints
a result overview of the so far available test results, except the Depot
Autopilot component has managed to print the result overview up to this point.
Unequal numbers of double quotes let the XML parser of init fail,
therefore replace all double quotes when transfering previous
results after a reboot.
Ref #3027
The number of tests to run is the number of test package-archives minus the
the those that are skipped for the given platform. The number is printed
directly after checking if the given platform is supported by the run script.
It helps the surrounding test infrastructure to ensure that, for instance, a
result graph always reflects the same total number of tests, even though there
is a sporadic problem with booting the platform.
The test for python requires x86 to be built. Therefore, there is no test
binary available when trying to execute that test on ARM with depot_autopilot.
This patch constraints the window size of the generated layout to the
minimum of the client's real window size and the wanted window size
(both may differ when resizing or maximizing windows).
This patch improves the handing of new appearing windows for which only
a wildcard assignment - but no exact assignment - rule exists. In the
prior version, an interactively raised window would stay in front of
such a window, which is unintuitive. The new version applies the
to-front mechanism to unknown new windows. For known new windows (with
an exact assignment rule) their original stacking position is preserved.
This patch solves an off-by-one problem in the window-size calculation,
which resulted in sporadic artificial resize requests. In Sculpt, this
glitch caused flickering artifacts in VirtualBox windows caused by
superfluous guest desktop-resize handling.
Furthermore, the patch introduces the dropping of resize requests with
unchanged content.
The commented-out <start> nodes are prone to become inconsistent with
the launchers. Hence, this patch removes them. Start nodes should better
be added by the '+' menu, at least initially.
Furthermore, the patch directs requests for the vfs.lib.so ROM to core's
ROM service to reduce the impact of low-level ABI changes (i.e., the
packet-stream layout) on existing vfs/libc-based packages.
The recall file system is a place where components can remember state.
E.g., to allow the window layouter to recall the window layout of the
previous session.
In a corner case, the toggling of the popup menu entered a state
where the menu could not be opened anymore by the user. Specifically
the following input sequence triggered this problem.
1. The user opens the menu
2. The user clicks on the menu and holds the button
3. While holding the button, the user moves the pointer to the
outside of the popup (e.g., to the '+' button)
4. The user releases the button.
In this situation, the popup is closed but the hover information for the
popup contains still the original clicked-on item. Hence, all subsequent
clicks on the '+' appear as both a click on the '+' (opening the popup)
and a click on the "hovered" popup entry (closing the popup).
The patch explicitely clears the popup's hover information when closing
the popup.
The pthread API is considered a standard feature of libc so better to
simply merge it with the libc. Pthreads are in fact already a part of
the libc in the form of weak symbols. This merger is also a prerequisite
for better integrating pthreads with the libc I/O task.
Fix#3054
Print a line like "succeeded: 35 failed: 11 skipped: 2" below the list of test
results. Adds further attributes to <previous-results> to communicate also the
previous statistics.
This commit moves the window layouter and window decorator into
dedicated packages that can now be combined with the "wm" server at
runtime and restarted/reconfigured/swapped-out independently.
To use the window manager, one must start the 'wm', 'window_layouter',
and one of the 'motif_decorator' or 'themed_decorator' subsystems.
Fixes#3024
When doing the libc_getenv test on autopilot+foc+x86 and one of the
subsequent tests crashes the system so it gets rebooted by the run
script, the system doesn't come up again. It gets stuck after core
initialization.
Issue #3027
This patch improves the detection of new appearing top-most windows.
Such a window should prompt the decorator to bring the corresponding
nitpicker view(s) to the front of the view stack. The original
implementation relied on hints provided by the layouter (the 'topped'
attribute). With the patch, the decorator tracks the top-most window by
itself, which improves the robustness.
As a second improvement, the patch defers the destruction of windows to
the point when all other window operations are completed. This hides
intermediate states when replacing one window by another in one step,
which is typical for console-like scenarios. Hence, this patch should
eliminate flickering artifacts when switching from one virtual console
to another.
Issue #3031
This commit replaces the former floating_window_layouter with a new
window_layouter component that supports the subdivision of screen space
into columns and rows, the concept of layers, and the principle ability
to store window layout information across reboots. The latter is
accomplished by reflecting the component's internal state as a 'rules'
report to the outside.
Fixes#3031
This component allows access to Terminal sessions via interactive SSH
sessions. Please read _repos/gems/src/server/ssh_terminal/README_ for
more detailed information.
Fixes#3014.
The new 'conditional' method simplifies the typical use case for
'Constructible' objects where the constructed/destructed state depends
on a configuration parameter. The method alleviates the need to
re-implement the logic again and again.
The patch also removes the 'Reconstructible' constructor arguments
because they are unused.
Fixes#3006
On some machines, both the AHCI and NVMe drivers are started within the
[drivers -> dynamic] subsystem. This ultimately exhausted the RAM quota
of this subsystem.
Issue #2987
This patch introduces the distinction of the manually managed
config/deploy from the managed config/managed/deploy. The latter
incorporates interactive changes of the system by the user. There are
two user interactions supported.
First, by clicking on the '+' button at the top-left of the runtime
view, the user can select a component to launch. All launchers at
config/launcher/ are listed in the popup menu. Each launcher can be
lauched only once. While running, is not available in the popup
menu.
Second, when selecting a node that corresponds to a start node in
config/deploy or that was interactively launched, the detailed view
shows a 'remove' button, which can be used to exclude the component
from the deployment.
The result of the interactive manipulation is always available at
config/managed/deploy. Hence, the current situation can be made
persistent by using it as config/deploy.
Fixes#2986
This patch unifies the handling of on-demand resource upgrades among
ram_fs and depot_rom, and applies the new pattern to the runtime view.
This way, runtime view becomes able to accommodate more complex
scenarios.
