Adds new Uplink session interface, the corresponding client side (Client,
Connection), and the corresponding API archives. An Uplink session is almost
the same as a NIC session with the difference that the roles of the end points
are swapped. An Uplink client is the one that provides a network interface
(for instance, a NIC driver) whereas an Uplink server is the one that uses
that network interface (for instance, a networking stack).
Therefore, in contrast to the NIC session, MAC address and link state come from
the Uplink client. The link state is reflected through the lifetime of an
Uplink session: The client requests the session only when the link state is
"UP" and closes it whenever the link state becomes "DOWN" again. The MAC
address is transmitted from the Uplink client to the Uplink server as an
argument of the session request.
Ref #3961
This commit restores the diag feature for selecting diagnostic output of
services provided by core. This feature became unavailable with commit
"base: remove dependency from deprecated APIs", which hard-wired the
diag flag for core services to false.
To control this feature, three possible policies can be expressed in a
routing target of init's configuration:
* Forcing silence by specifying 'diag="no"'
* Enabling diagnostics by specifying 'diag="yes"'
* Forwarding the preference of the client by omitting the 'diag'
attribute
Fixes#3962
- Vendor devices add addtional data to the config descriptor, read and
added to the usb session
- allow '0' configuration within the usb session
issue #3822
To simplify writing native VirtIO drivers for Genode add helper classes
representing VirtIO device and queue. The queue implementation should
be platform independant. The device abstraction however is closely tied
to the VirtIO transport being used (PCI/MMIO). Both PCI and MMIO
implementations expose the same public API so the actual driver logic
should be the same regardless of which transport is used.
Its also important to note that the PCI version of Virtio::Device
currently does not support MSI-X interrupts. Unfortunately my kowledge
about PCI bus is very limited and my main area of interest was to get
VirtIO drivers working on virt_qemu ARM/Aarch64 platform. As such all
the VirtIO drivers I plan to submit will work with PCI bus, but might
not use some extended capabilities.
Ref #3825
- make GPIO server more robust on imx by not throwing exceptions for
unknown pins, use '_with_gpio' instead
- use 'Gpio::Pin' data type instead of POD 'unsigned'
issue #3900
The combination of Net::Mac_address and
Genode::ascii_to(Net::Mac_address) required shaky quirks in several
places because GCC is not able to resolve the ascii_to overload if
base/xml_node.h was included to early. The current solution moves the
several ascii_to overloads "closer" to the Net types by putting them
into the Net namespace, where GCC reliably picks them up.
Hence, co-locating the ascii_to() utility with the overload type in the
same scope/namespace is good practice.
This patch removes the now obsolete <nic/xml_node.h> header file.
- base/cancelable_lock.h becomes base/lock.h
- all members become private within base/lock.h
- solely Mutex and Blockade are friends to use base/lock.h
Fixes#3819
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
This patch changes the 'Single_file_system' to return NO_PERM only if
the to-be-unlinked file corresponds to the single file. This way, a
<rom> co-mounted with a <ram> file-system does not stand in the way of
unlinking files from the <ram>. The concrete symptom occurred the
following scenario:
<vfs>
<dir name="home">
<ram/>
<rom name="..."/>
</dir>
</vfs>
The following sequence of commands wrongly resulted in "Operation not
permitted":
$ mkdir -p /home/a/b/c
$ rm -f /home/a/b/c/d
In this case, rm should not fail (unlink should return ENOENT)
Fixes#3690
When specifying "/" or "" as rel_path to the 'Directory' constructor,
the constructed directory should refer to the same directory. The
implementation of the join utility did not consider this corner case. It
occurred during the attempt to use fs_query with "/" given as path.
This patch also adds a Directory::Entry::dir accessor that returns true
if the entry is a directory.
Fixes#3630
This patch adds a special variant of a 'Content_producer' called
'Xml_producer', which allows the direct use of an 'Xml_generator'
for generating the ROM-module content.
This patch extracts the child-management functionality from the init
component into a new library called "sandbox". The library API is
located at 'os/include/os/sandbox.h'.
The sandbox API allows for the interaction of the component with the
sandboxed children by providing locally implemented services. This
mechanism is illustrated by the new test at os/src/test/sandbox.
Issue #3601
This patch extends the 'Buffered_xml' utility with a new constructor
that fills the buffer with the output of an 'Xml_generator'. It thereby
presents an easy way to generate XML to be consumed locally.
The patch also add a deprecation mark to the original 'xml' accessor
because copying 'Xml_node' objects (here as return value) is dangerous.
The new 'with_xml_node' method should instead be used to access the XML
content stored in the buffer.
Fixes#3602
`volatile` effectively prevents instruction reordering by the compiler
and fixes an issue with -O3 compiled components.
Note, this commit does not address further arguments regarding memory
barriers and volatile voiced in issue #693.
Issue #693
This is a follow-up patch for issue #1784 that solves two
inconsistencies.
- The Vfs::Timestamp::INVALID matches File_system::Timestamp::INVALID
- The Noux libc plugin tests for Timestamp::INVALID instead of a
positive value.
The patch fixes the mtime info as shown in directory listings in
Sculpt's inspect window.
Add a new plugin for creating pipes between pairs of VFS handles. It is
intended to replace the libc_pipe plugin, one of the last remaining libc
plugins.
In contrast to the libc_pipe plugin, this plugin defers cross-handle
notification until I/O signal handling rather than block and unblock
readers using a semaphore. This is a performance regression in the case
of multiple threads blocking on a pipe, but shall be an intermediate
mechanism pending renovations within the libc VFS and threading layers.
As a side effect, threads blocked on a pipe might not be resumed until
the main thread suspends and dispatches I/O signals.
The "test-libc_pipe" test has been adjusted to use the VFS pipe plugin
and tests both local pipes and pipes hosted remotely in the VFS server.
Merge adaptations (such as EOF handling, adjustment to VFS/libc
interface changes) by Norman Feske.
Fix#2303
This change allows for the conversion of directory entries in place
(i.e., in the VFS server) and anticipates the potential future merge of
both types into one.
Issue #3547
This patch adds support for watch notifications for the
'Readonly_value_file_system', which is often used by VFS plugins to
implement pseudo files. It thereby enables VFS clients to respond to
VFS-plugin events (think of terminal resize) dynamically.
Fixes#3523
When the construction of a member of Packet_stream_*::Rpc_object after
the _cap member threw an exception, the object was not dissolved from
the entrypoint although the Rpc_object vanished at this point. This was
because the call to 'manage()' happened in the initializer list (for the
_cap member instantiation). The destruction of the _cap member then did
not dissolve the object.
This first fix moves the call to 'manage()' into the constructor body
after the instantiation of all other members. A more sophisticated fix
would use some kind of 'Managed_object' life-time guard that manages an
object on construction and dissolves on destruction.
Ref #3525
Nowadays, we use standard command-line tools like vim to edit init
configurations dynamically, which alleviates the need for a custom CLI.
The CLI-monitor component was too limited for use cases like Sculpt
anyway.
The patch also removes the ancient (and untested for long time)
terminal_mux.run script, which used to be the only remaining user of the
CLI monitor.
Issue #3512
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
The Press event is actually a Press_char event with a default codepoint.
The default codepoint is now
Codepoint { Codepoint::INVALID } /* value 0xfffe */
in contrast to
Codepoint { Input::Event::INVALID } /* value 0 */
Issue #3483
A client may register a signal handler to be notified whenever the
RTC value was changed, i.e., a mis-configured clock was synchronized,
by calling 'set_sigh()'.
Issue #3450
* Make target binaries independent of board SPECS
* Name binaries of one architecture unambigously
* Extend include path to match board specifics
* Adapt run-scripts to use the right binary
Ref #2190
Ref #3180
To enable the use of uncached DMA buffers as RX and TX communication
buffers in between driver (service) and client, introduce a cache
attribute in the constructor of Nic::Session_component
Ref #3291
This patch equips the 'Block::Connection' with a framework API for the
implementation of robust block-session clients that perform block I/O in
an asynchronous fashion.
An application-defined 'JOB' type, inherited from 'Connection::Job',
encapsulates the application's context information associated with a
block operation.
The lifecycle of the jobs is implemented by the 'Connection' and driven
by the application's invokation of 'Connection::update_jobs'. The
'update_jobs' mechanism takes three hook functions as arguments, which
implement the applications-defined policy for producing and consuming
data, and for the completion of jobs.
Issue #3283
As a preparatory step for introducing the new block-client API, we have
to turn the 'Block::Connection' into a class template. The template
argument will be used to tie an application-defined job type to the
block connection.
Issue #3283
This patch adds support for manually triggering the wakeup of the packet
sink by the source. This way, a packet source becomes able to marshal
batches of submissions or unmarshal batches of acknowledgements before
yielding the control over to the sink.
Issue #3283
This patch removes the blocking Block::Session::sync RPC function and
adds the asynchronous operations SYNC and TRIM to the block session's
packet-stream interface.
Even though the patch adjusts all block components to the interface
change, the components keep the former blocking handling of sync
internally for now because of the design of the 'Block::Driver'
interface. This old interface is not worth changing. We should instead
migrate the block servers step by step to the new
'Block::Request_stream' API.
Fixes#3274
The new request tag allows a block-session client to uniquely correlate
acknowledgements with outstanding requests. Until now, this was possible
for read and write operations by taking the value of the request's
packet-stream offset. However, SYNC and TRIM requests do not carry any
packet-stream payload and thereby lack meaningful offset values. By
introducing the notion of a 'tag', we can support multiple outstanding
requests of any type and don't need to overload the meaning of the
'offset' value.
Issue #3274
This patch splits the 'Request' definition into smaller types that are
suitable for the client-side API too.
The new 'Operation' type comprises the block operation's type (opcode)
and the operation's arguments (block number, block count).
The former 'Request::operation_defined' is now 'Operation::valid'.
The 'Request' aggregates an 'Operation', which changes its object
layout.
Note that this commit relaxes the bit-precise definition of 'Request' to
facilitate the use of 'unsigned long' where appropriate, in particular
for the request tag (which should correspond to an 'Id_space::Id'). The
originally bit-precise definition was pursued to allow the sharing of
the 'Request' type between SPARK and C++ code. However, it turns out
that defining a native type in each language and a (set of) converting
constructors is a more natural approach.
Issue #3283
This patch renames 'wakeup_client' to 'wakeup_client_if_needed' to
clarify that the method triggers signals only when needed, not on every
call.
The name 'wakeup_client' is prone to misguide users to call the function
conditionally as an optimization, thereby complicating the code, but to
no effect.
Fixes#3279
This patch replaces the formerly fixed 2 KiB data alignment within the
packet-stream buffer by a server-defined alignment. This has two
benefits.
First, when using block servers that provide small block sizes like 512
bytes, we avoid fragmenting the packet-stream buffer, which occurs when
aligning 512-byte requests at 2 KiB boundaries. This reduces meta data
costs for the packet-stream allocator and also allows fitting more
requests into the buffer.
Second, block drivers with alignment constraints dictated by the
hardware can now pass those constraints to the client, thereby easing
the use of zero-copy DMA directly into the packet stream.
The alignment is determined by the Block::Session_client at construction
time and applied by the Block::Session_client::alloc_packet method.
Block-session clients should always use this method, not the 'alloc_packet'
method of the packet stream (tx source) directly. The latter merely
applies a default alignment of 2 KiB.
At the server side, the alignment is automatically checked by
block/component.h (old API) and block/request_stream.h (new API).
Issue #3274
This patch modernizes the 'Block::Session::info' interface. Instead of
using out parameters, the 'init' RPC function returns a compound 'Info'
object now. The rather complicated 'Operations' struct is replaced by
a 'writeable' attribute in the 'Info' object.
Fixes#3275
Replace the I/O response handler that is passed to the VFS at
construction with an object that is dynamically attached to handles.
This object shall also accept read-ready notifications, and plugins are
encouraged to keep handles awaiting ready-ready notifications separate
from handles that await I/O progress.
Replace the use of handle lists in plugins with handle queues, this
makes the code easier to understand and the ordering of notifications to
the application more explicit.
These changes replace the use of the Post_signal_hook from all VFS
plugins, applications must assume that read-ready and I/O notifications
occur during I/O signal dispatch and use an Io_progress_handler at its
entrypoints to defer response until after signal dispatching.
Fix#3257
The "Vfs::Vfs_handle" type should not contain any public members that
can be initialized by the VFS internally and by the application, so
remove inheritance from the "Genode::list::Element" class. The VFS
plugins must instead use lists of "Vfs::Vfs_handle" sub-classes, the
lifetime of which are always managed by the plugin.
Ref #3036
This is a safeguard against accidentally taking the 'Ack' interface as a
value instead of a reference.
The 'Payload' interface should also not be copied (and potentially
stored) because it contains a pointer.
The new 'transfer' function interface defines how pixel/alpha values
sampled from texture are applied to a destination pixel, similar to the
role of a fragment shader in GPU-based rendering. The transfer function
can be customized by defining custom pixel types, which may be (but
don't need to be) derived from 'Pixel_rgba'.
Issue #3221
This commit removes APIs that were previously marked as deprecated. This
change has the following implications:
- The use of the global 'env()' accessor is not possible anymore.
- Boolean accessor methods are no longer prefixed with 'is_'. E.g.,
instead of 'is_valid()', use 'valid()'.
- The last traces of 'Ram_session' are gone now. The 'Env::ram()'
accessor returns the 'Ram_allocator' interface, which is a subset of
the 'Pd_session' interface.
- All connection constructors need the 'Env' as argument.
- The 'Reporter' constructor needs an 'Env' argument now because the
reporter creates a report connection.
- The old overload 'Child_policy::resolve_session_request' that returned
a 'Service' does not exist anymore.
- The base/printf.h header has been removed, use base/log.h instead.
- The old notion of 'Signal_dispatcher' is gone. Use 'Signal_handler'.
- Transitional headers like os/server.h, cap_session/,
volatile_object.h, os/attached*_dataspace.h, signal_rpc_dispatcher.h
have been removed.
- The distinction between 'Thread_state' and 'Thread_state_base' does
not exist anymore.
- The header cpu_thread/capability.h along with the type definition of
'Cpu_thread_capability' has been removed. Use the type
'Thread_capability' define in cpu_session/cpu_session.h instead.
- Several XML utilities (i.e., at os/include/decorator) could be removed
because their functionality is nowadays covered by util/xml_node.h.
- The 'os/ram_session_guard.h' has been removed.
Use 'Constrained_ram_allocator' provided by base/ram_allocator.h instead.
Issue #1987
This patch enhances the packet-stream API with the principle ability to
side-step the built-in implicity data-flow signals and manage the
signals manually. This allows for a more efficient batching of packet
processing.
Issue #3092
The 'tx_cap' RPC function is only used at session-creation time. For
this reason, it was not listed in the "official" RPC interface in
'block_session.h'. However, this makes the interface more obscure than
it needs to be. So this patch promotes it to a regular RPC function.
Issue #3092
Refactor the graphical terminal server to internally represent
characters as 16-bit codepoints and handle the duplex terminal stream as
UTF-8.
- Make the Codepoint class printable to the Output interface
- Decode data received at the Terminal session from UTF-8 to a 16-bit
character
- Pass 16-bit characters through terminal decoder and char-cell arrays
- Send Unicode through terminal session in a burst of UTF-8 bytes
Fix#3148
The situation where a 'Session_policy' is constructed for a label with
no matching policy is in almost all cases a configuration problem.
A diagnostic message eases pin-pointing such mistaks. By adding the
message to the 'Session_policy', servers don't need to manually handle
the exception to provide diagnostic information. This simplifies the
server code in many components.
Since the timer and timeout handling is part of the base library (the
dynamic linker), it belongs to the base repository.
Besides moving the timer and its related infrastructure (alarm, timeout
libs, tests) to the base repository, this patch also moves the timer
from the 'drivers' subdirectory directly to 'src' and disamibuates the
timer's build locations for the various kernels. Otherwise the different
timer implementations could interfere with each other when using one
build directory with multiple kernels.
Note that this patch changes the include paths for the former os/timer,
os/alarm.h, os/duration.h, and os/timed_semaphore.h to base/.
Issue #3101
This patch improves the window decorators in the following respects:
* Strict warnings are enabled now.
* The use of the 'List_model' makes the application of window-
layout changes more robust. This is particularly the case for
the restacking of windows.
* Display-mode changes are now supported by both decorators.
Issue #3094
Packets whose data is stored within the Packet_descriptor itself
but not as payload, .e.g Usb::Packet_descriptor, are valid packets
after all. So loosen the packet valid check for zero-sized packets
is reasonable.
Fixes#3076.
Some application code is dereferencing the pointer returned by
'packet_content' at packet streams without checking that it is valid.
Throw an exception rather than return a null pointer, except for
zero-length packets, which have somewhat implicit invalid content and
that we believe to be properly handled in all current cases.
The client-side of a packet stream cannot take corrective action if the
server-side is sending packets with invalid content, but the servers
that provide packet streams should catch this exception to detect
misbehaving clients.
Ref #3059
The bulk buffer is now 64Byte-aligned so that the allocated
packets get aligned likewise (assumed the packet allocator uses an
appropriately aligned block size). This ensures that each packet
starts at a new cache line on common platforms.
Issue #3053
This patch improves the detection of new appearing top-most windows.
Such a window should prompt the decorator to bring the corresponding
nitpicker view(s) to the front of the view stack. The original
implementation relied on hints provided by the layouter (the 'topped'
attribute). With the patch, the decorator tracks the top-most window by
itself, which improves the robustness.
As a second improvement, the patch defers the destruction of windows to
the point when all other window operations are completed. This hides
intermediate states when replacing one window by another in one step,
which is typical for console-like scenarios. Hence, this patch should
eliminate flickering artifacts when switching from one virtual console
to another.
Issue #3031
Add additional parsing modes to the sequence decoder to detect and
discard unhandled sequences for ECMA-48, DEC private, and Xterm.
Add new behavior for cursor movement, cursor hiding, character deletion,
and line-wrapping.
Fix#2923
Calling 'handle_io_response()' in a regular VFS function (in contrast to a
post-signal hook) can cause problems if the caller of the VFS function holds
a lock which prevents the io response handler from returning.
With this commit, the user of the VFS becomes responsible for unblocking
threads which might be blocking after a failed 'queue_read()', 'queue_sync()'
or 'write()' call.
Fixes#2896
Quietly insert forward declaration of a Input::Binding class, and make
it a friend of Input::Event and Input::Session_client. This is to allow
non-C++ language bindings (Nim) to access private members by providing
their own implementation of the Binding class.
Fix#2889
Removed the modified mark from handles that have been written to when
they are synced, otherwise a notification would be sent again when the
handle is closed.
Ref #2839
The old MAC allocator had several drawbacks:
* the address base was a public static that could and must have been written
directly from outside the class
* the in-use-flag array was based on unsigned values consuming 4 bytes each
for only one bit of information
* it was a public header that we actually don't want to expose to all
components but only to the few networking components
* it used the not-so-safe bit notation for integer members of GCC
The new version fixes all these drawbacks.
Issue #2795
Instead of handing over the maximum available size to the packet data
accessors, hand over a size guard that keeps track of the packets
boundaries.
This commit also moves the size-guard utilitiy header of Ping and NIC
Router to the include/net directory making it a part of the net library.
It applies the new approach to all net-lib users in the basic repositories.
Ping looses its configurability regarding the ICMP data size as this would
require an additional method in the size guard which would be used only by
Ping.
The size guard was also re-worked to fit the fact that a packet can
bring a tail as well as a header (Ethernet).
Issue #2788
The Ethernet payload may be followed by padding of variable length and
the FCS (Frame Check Sequence). Thus, we should consider the value
"Ethernet-frame size minus Ethernet-header size" to be only the maximum
size of the encapsulated IP packet. But until now, we considered it to
be also the actual size of the encapsulated IP packet. This commit fixes
the problem for all affected components of the Genode base-repository.
Fixes#2775
This reduces the redundant implementations of checksum calculation to
one generic implementation, makes the checksum interface conform over
all protocols, and brings performance optimizations. For instance,
the checksum is now calculated directly in big endian which saves us
most of the previously done byte-re-ordering.
Issue #2775
Replace packet method 'T *data' by the new methods 'T &reinterpret_data'
for parsing or modifying existing sub-protocol packets and 'T
&construct_at_data' for composing a new sub-protocol packet. This has
the advantage that, when composing a new packet, the default constructor
that zero-fills the packet is always called first.
Fixes#2751
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
This patch replaces the terminal's formerly built-in fonts with the new
VFS-based font handling.
To avoid the copying of the terminal's font configuration across run
scripts, this patch adds the new terminal/pkg runtime package, which
includes everything needed for instantiating a terminal: the actual
terminal component, the library dependencies (vfs_ttf, which in turn
depends on the libc), a font (bitstream-vera), and a reasonable default
configuration.
Fixes#2758
