This commits introduces improvements to the test functions to avoid
code duplication, and renames these functions to reflect better what they
are used for.
Issue genodelabs#4866
The last character should only be skipped if a `\0` or `\n` is found. If
the string ends without such a character or the maximum line length is
hit, we do not skip the last character.
Fixesgenodelabs/genode#4985
Dynamically loading the `compat-libc` breaks `fork(2)` on Genode.
Switch `compat-libc` to a special api package that provides a source
file for statically linking the library, analogous to the `blit`
package. This also requires a quirk in Goa but should prevent breaking
`fork()` and removes the runtime and archive dependencies for Rust
packages using `compat-libc`.
Ref genodelabs/goa#61
Implement FBSD_1.0 versions of libc functions ('stat', 'fstat'). The
functions are versioned with @FBSD_1.0, and therefore, will not clash
with libc during linking. However, to be called by our dynamic linker,
the library must be before libc in the NEEDED section of the binary
using it. This requires the lib to be in front of libc in the LIBS
variable. The library currently will call libc 'stat' and 'fstat' by
looking up the symbols via 'dlsym'.
Ref genodelabs/goa#61
Some Ubuntu installations (e.g., 20.04) create installation disks with
strange C/H/S MBR partitions like 3988/255/2. Normally, VirtualBox reads
the MBR to guess disk geometry information for the virtual BIOS.
Unfortuantely, the strange values from Ubuntu lead to a heavy
virtual-disk activity on boot. Therefore, this commit forces the use of
calculated values based on the assumption that large disks use LBA
addressing anyway.
Fixes#4978
Adds Genode::Hex_dump class to the formatted_output.h header. This class can be
used to print a hexadecimal dump of a byte range. The data is printed in a
format similar to that used by Linux's 'xxd'. In addition to the 'xxd' format,
consecutive duplicate lines are replaced with a single "*\n" as done also by
Linux's 'hexdump'.
Ref #4966
The DHCP client implementations of Ping originally is a copy of the NIC router
implementation adapted for Ping. The two versions diverged further over the
years. This issue should be solved by should merging them into a centralized
implementation. However, this commit treats only a recent issue with the
nic_uplink.run test on pbxa9 qemu but does this by re-aligning the two
implementations partially. The final merge should be done in a separate commit.
Ref #4966
The Depot Autopilot used to filter out tabs and color sequences before
forwarding the test log to the own log. This commit prevents this and further
cleans up the string-filters code.
Ref #4922
The new 'log_prefix' attribute is effective when used in a tests runtime in
<succeed> or <fail> tags that have a non-empty content string. When matching
the log against the pattern given in the affected <succeed> or <fail> tag, the
Depot Autopilot will consider only those test-log lines that start with the
given prefix.
Ref #4922
* Removes the <event> tag from all test package runtime files and replaces the
contained <timeout> and <log> sub-tags with the new tags <succeed> and
<fail>. If a <succeed> or <fail> tag has a content, it defines a log pattern
that should be recognized and render the test failed or successful. If a
<succeed> or <fail> tag has an attribute after_seconds that is not set to 0,
it defines a timeout after which the test should be rendered failed or
successful.
* Adapts the Depot Autopilot to support the new syntax in the test-package
runtime files. However, for now, the Depot Autopilot is kept compatible to
the old syntax as well. If the <events> tag is present, it is prioritized
over the new syntax.
Fixes#4922
Several nightly network-related tests fail currently on sel4/pc because the
new e1000 NIC driver requires more capabilities. The "drivers nic" package
was already adapted to the new requirement but some tests fail to provide
enough caps to the corresponding sub system. This commit tries to fix all
remaining tests.
Ref #4923
* During a session-close, the device-specific usb task and driver data
gets freed. Part of it was the RPC data. To prevent use-after-free
turn it into a pointer and leave it on the stack of the caller thread
* During a device release, URBs discards, and reset operation the Linux task
might get blocked, and then a RPC caller task might return if the RPC
operation was marked as finished already, although it hasn't succeeded yet
* USB devio RESET has to be done before a device release to be effective
Fixgenodelabs/genode#4969
* Within flush_transfer of the USB session a given entrypoint gets
resetted, to be effective al related URBs need to be discarded first
* Discarding URBs shall be done in reverse order, like libusb is doing it,
where it warns about potential races otherwise
Ref genodelabs/genode#4969
* Adds a new component server/nic_uplink that forwards packets unmodified
between one Uplink session at one side and potentially multiple Nic sessions
at the other side.
* Adds a new run script nic_uplink.run that does a basic test with multiple
Nic clients on this component and adds it to the autopilot list.
* Adds a new depot recipe src/nic_uplink for this component.
* Adds a new depot recipe pkg/pc_nic for deploying the pc_nic_driver together
with a nic_uplink server. This allows for raw access to the network connected
to the Nic of the system in contrast to the commonly used routed and NAT'd
access via NIC router. That said, it enables the use of network protocols
not yet supported by the NIC router at the cost of less protection.
Ref #4966
Introduces a new class that does the clean-up if some exception is
thrown while creating the session. This reduces redundancy and overall
lines of code.
Ref #4966
by just test the migration feature, without relying on load measured on the
CPUs. On Qemu (and depending on other load in the Linux system), the migration
feature gets not triggered in time reliable.
* Allow support for kernel configurations without CONFIG_IRQ_DOMAIN_HIERARCHY
* Export `irq_domain` instantiated for driver-specific extensions of the irqchip
Fixgenodelabs/genode#4964
This change allows a monitored VBox instance to specify a distinct
(lower) priority to the VM session to ensure that the VMM is always
prioritized higher than the VCPUs. This is important because host
I/O at the VMM should always be able to preempt a busy guest.
Issue #4917
Decreasing the internal buffer size will implicitly limit the number
of blocks provisioned for recording and brings them in line with
the number of blocks used for playback (2).
Note that this patch also sets an upper-bound on the number of
samples in 'Audio_*::PERIOD'.
If all connectors are set to disabled by configuration, the connectors
stayed enabled since the new configuration reveals no preferred or minimal
resolution/mode. Instead, use the last set resolution in order to get to the
disabling code.
The memory barriers where introduced with commit "test-timeout: fix build
errors with -std=gnu++20" presumably in order to prevent GCC optimization from
removing the empty for loops the test is using because using a volatile index
variable was no longer an option.
However, the memory barriers seem to have a negative effect on the measurements
performed with the affected loops. The commit caused the timeout test to fail
at least on imx53_qsb.
This commit fixes the issue by using a simple empty for loop without volatiles
or memory barriers but protected inside a function that is compiled with
optimization disabled.
Ref #4959
This commit extends the Lx_kit initialization function by passing in
a signal handler that is used to perform the normally occurring
scheduler execution and is a follow-up change for the decoupling
scheduler execution commit.
Instead of burying the signal handler in the 'Lx_kit::Scheduler'
object it is provided by the main object where the driver is free
to perform any additional step before or after executing the scheduler.
Issue #4927Fixes#4952
Since the wireless LAN driver is actually a 'Libc::Component' due to
its incorporation of the 'wpa_spplicant' application, we have to
intercept its construction because we have to initialize the Lx_kit
environment before any static ctors are executed. Most Linux initcalls
are implemented as ctors that will be otherwise implicitly executed
before the controll is given to us in 'Libc::Component::construct'.
Issue #4927.
The timer used to read the counter first and then the IRQ status. This
could cause a non-wrapped counter value to be considered a wrapped
counter value, leading to bogus timeout durations.
This commit fixes the bug and documents the used timer mode in the
driver in order to make future debugging of the driver easier.
Ref #4959
Prevent missing new RPC calls handed over to a Linux task
of a corresponding usb-device, while that task blocked
during enqueuing of asynchronous URBs.
Fixedgenodelabs/genode#4955
* add a sensible priority setup into the test script in order to protect
drivers and stack components from the demanding net clients
* delay the starting of the net clients by 5 seconds in order to give the
drivers and stack components some time to startup in peace
* use only explicit service routing and caps values
Ref #4923
This patch replaces the exception-based error propagation by the use of
'Attempt' return values, which eliminates side effects of the exception
handling - cxx_heap allocations - from code paths that are used by the
the cxx_heap itself (when growing the cxx_heap).
It thereby fixes the failure of the sub_rm test at the "attach RAM ds to
any position at sub rm - this should fail" step.
Fixes#4953
This patch enhances Sculpt with the ability to detect user inactivity
for driving a screensaver by combining nitpicker's hover and focus
reports with a timer.
Issue #4950
Nitpicker's hover and focus reports contain an 'active' attribute, which
can be inspected for the detection of user activity, e.g., as trigger
for a screensaver or for dynamic clipboard policies.
When using the 'Event' session, the reporting code updated the reports
only on incoming events. This patch adds the periodic reporting as used
when using the old 'Input' session.
Issue #4950
Decoupling the scheduler execution can lead to missed interrupts
because the current implementation only handles one pending
interrupt and requires immediate processing.
This commit introduces a helper object that is used to capture
any occuring interrupts that are then handled consecutively.
Issue #4927.
Prior to this commit, whenever an external event occurred, for example
timer or interrupt, the corresponding I/O signal handler was triggered.
This handler unblocked the task waiting for the event and initiated the
immediate execution of all unblocked tasks. Since these tasks may hit
serialization points, e.g. synchronously waiting for packet stream
operations, that require handling of other I/O signals this leads to
nested execution. This, however, is not supported and mixes application
and I/O level signal handling.
The flagging of the scheduling intent is now decoupled from its
execution by using an application level signal handler that is run in
the context of the components main entrypoint. The I/O signal handler
now triggers the scheduling execution by sending a local signal to
the EP.
Since it might be necessary to execute a pending schedule from the EP
directly the scheduler is extended with the 'execute' member function
that performs the check that the scheduler is called from within the
EP and triggers the execution afterwards.
Issue #4927.
On disconnect of displays, e.g. seen with Type-C connectors, the encoder was
not properly disabled due to a missing drm_client_modeset_commit. In order that
the commit succeed, however a fb must be assigned to the modeset. Missing to
do so leads to an -EINVAL by the drm_client_modeset_commit.
Fixes#4948
Fixes alignment faults that occured in the AES256 implementations while
wrapping or unwrapping keys on imx53_qsb, imx6q_sabrelite, and imx7d_sabre.
The problem was that the unwrap_key/wrap_key functions did reinterpret casts
from unsigned char pointers to uint64_t pointers and then directly used the 64
bit values of referenced by the latter. Most probably this caused the compiler
to optimize operations in the assumption that the pointer is 8-byte aligned
which then created alignment faults.
As a solution, this commit changes the interface of the wrap_key/unwrap_key
functions to take uint64 pointers as arguments instead of unsigned char
pointers and then adapts the function users to ensure that they refer to
appropriately aligned memory regions.
Fixed#4932
The initial memory backend implementation was brought over from DDE
Linux and was geared towards use-cases where a high-performing
allocator is useful. In case of the audio driver this is overkill
and since no other driver that could benefit from such an
implementation was ported in the meantime rather use a simpler
implementation that keeps the overhead down.
Fixes#4946.
Since component.cc is no longer linked to core, we can also remove
entrypoint.cc, which was merely a dependency of component.cc.
Related to issue #4784
This patch replaces the global '_wait_for_exit_sem' object by a local
static variable, which does not rely on the global ctors. It thereby
fixes the fault_detection test after the removal of the global ctors
execution from core ("base: remove component.cc from core").
Issue #4784
With these options enabled comparative testing between pc_linux drivers
and bzImages becomes much easier on EFI-only machines. The impact on the
actual Genode drivers is minimal.
This patch removes the use of the Entrypoint::schedule_suspend mechanism
and the call of glibc's exit from the lx_hybrid tests, for two reasons.
First, the interplay of atexit handlers executed by the glibc and
Genode's lx_hybrid library is complicated while bringing no benefits in
practice as lx_hybrid applications are usually servers that don't exit
anyway.
Second, the Entrypoint::schedule_suspend mechanism in not used by any
other component. By removing its use from the lx_hybrid tests, we can
remove this mechanism from the base library.
Issue #4940
By supplying only the parts of the Env that are actually relevant for
initializing the cxx heap, we avoid the need for the 'Env' interface.
The patch also moves the call of 'init_ldso_phdr' to the outside
of the cxx library because it does not belong there.
Issue #4784
USB devices that are never associated to client sessions lack
usb_per_dev_data (and a kernel thread). Therefore, the devices should be
discontinued directly on unplug as no URBs can be pending.
Issue genodelabs/genode#4795
This commits enables the R8169 driver and was tested with two
RTL8168h/8111h (10ec:8168 rev 0x15 sub 1462:7a38 / 1d05:109f) and
two equal RTL8125B (10ec:8125 rev 0x5 sub 1458:e000) devices
running Sculpt.
Firmware loading is for now not implemented but specific Linux
commits suggest it could be necessary. However, doing so will be
post-poned until we have gathered more experience with the driver.
Restarting the driver might lead to the following IOMMU error
messages but the device seems to work anyway:
[ 0] IOMMU:0xffffffff817ec040 FR:0x8a00000000002500 FI:0xfffffffdf8d30000 type:0x8 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2000004200002500 FI:0x000c21b0 type:0x2 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004200002500 FI:0x000c21a0 type:0x2 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004200002500 FI:0x00138000 type:0x2 BDF:25:00.0
[…]
[ 0] IOMMU:0xffffffff817ec040 FR:0x8a00000000002500 FI:0xfffffffdf8d30000 type:0x8 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004300002500 FI:0x00124000 type:0x2 BDF:25:00.0
Issue #4921.
While this approach still scans "holes" in the bus range, it stops
scanning at the maximum subordinate bus number reachable from the base
PCI bus at the host bridge. Startup under Qemu no longer takes about 12
seconds for scanning 256 buses.
By splitting the 'init_capability_slab()' implementation to a separate
compilation unit 'capability_slab.cc', base-hw no longer needs a
customized version of 'lib/base/platform.cc'.
Related to issue #4784
This patch replaces the internal use 'env_deprecated()' from the
implementation of the thread API in the base library. It also
replaces the global accessor 'main_thread_cap' by the explicit
propagation of the main-thread's capability to the single point of
use via a new 'init_thread_bootstap' function.
Issue #4784
This back end can be used in place of the existing jitterentropy based
on in case random is not strictly needed by the component but one
wants to use the available 'shadow/drivers/char/random.c'
implementation.
Issue genodelabs/genode-allwinner#21.
The implementation was already part of the Zynq's sd_card driver and
since other ARM drivers need it as well, promote it to the common
shadow library.
Issue genodelabs/genode-allwinner#21.
* Removes all previous structs that represented an on-disc block layout
and were therfore subject to a number of layout restrictions (packed,
padding members, enum representations, etc.).
* Adds a replacement struct without any layout restrictions for each of the
removed structs. The new structs are named similar to the old structs.
* Adds block encoding and decoding utilities for easily converting from the
new structs to on-disc blocks and vice-versa (Block_scanner, Block_generator,
T::decode_to_blk, T::encode_from_blk)
* Adapts all affected places in the library to encode and decode proberly
instead of simply casting pointers.
* Thereby cleans up the hashing utilities to use typed-reference args instead
of void pointers.
* Re-enables run/tresor_tester and test-file_vault_vonfig_report for platforms
rpi, imx53_qsb, imx53_qsb_tz, imx6q_sabrelite, imx7d_sabre.
Ref #4819
* Replaces bool access types with uint8_t access types
* Ensures, that the framework always uses the smalles possible uint type
for the return value wherever a bitfield is read and returned to the user.
Ref #4924
In some instances, the fetchurl progress determined by
depot_download_manager will be empty when the download fails (e.g. due
to a 404), this commit fixes a bug where this would be interpreted as
the download having completed which would subsequently start hash
verification of a package that has never actually been downloaded.
Fixes#4919
The depot_remove component can delete PKG archives with
automatically resolving dependencies and deleting archives that are not
required on the system anymore.
Issue genodelabs#4866
On some platforms (x86_32/pistachio, x86_64/sel4) system startup is slow
and the previously configured 30 seconds not sufficient. With this commit, the
timeout is raised to 60 seconds only when running on such a platform.
Ref #4923
This test was originally a copy of ping.run and therefore unnecessarily
inherited all its complexity for testing ping component behavior. Additionally,
ping.run was more actively maintained and evolved over time whereas
nic_dump.run didn't receive the same care. Now, the test fails on certain
platforms although NIC dump works just fine. Therefore, this commit reduces the
test behavior to what is really necessary for testing nic_dump and by doing so,
also fixes the failing targets.
Fixes#4926
On x86_32 okl4, the test timed out although the test timeout was already at
240 seconds for this platform. Instaed of raising it further, this commit
reduces the number of ping rounds for all platforms that are considered as
slower by the test.
Ref #4923
This patch restricts 'Region_map::attach_executable' to create read-only
mappings, while offering the option to map the full rights using a new
'attach_rwx' method.
The 'attach_rwx' method is now used by the dynamic linker to explicitly
attach the linker area with full rwx rights. With the old page-fault
handling code, the execute flag was evaluated only for leaf dataspaces,
not for managed dataspaces while traversing region-map hierarchies.
With the new page-fault handling code, the execute bit is downgraded
to no-execute when passing a managed dataspace that is not attached
as executable.
Issue #4920
The change "core: allow offset-attached managed dataspaces" addressed a
corner case of the use of nested region maps. Apparently, this change
negatively affects other scenarios (tool_chain_auto).
In order to confidently cover all the differnt situations, this patch
reworks the page-fault resolution code for improved clarity and safety,
by introducing dedicated result types, reducing the use of basic types,
choosing expressive names, and fostering constness.
It also introduces a number of 'print' hooks that greatly ease manual
instrumentation and streamlines the error messages printed by core.
Those messages no longer appear when a user-level page-fault handler
is reistered for the faulted-at region map. So the monitor component
produces less noise on the attempt to dump non-existing memory.
Issue #4917Fixes#4920
The new monitor component at os/src/monitor is the designated successor
of the gdb_monitor. This initial version, however, implements only the
subset needed to inspect the memory of the monitored component(s).
In contrast to the gdb_monitor, the new component supports the monitoring
of multiple components, leveraging the sandbox API. It can therefore be
used as a drop-in replacement for the init component. Like the gdb_monitor,
the new monitor speaks the GDB protocol over Genode's terminal session.
But the protocol implementation does not re-use any gdbserver code,
sidestepping the complexities of POSIX.
There exist two run scripts illustrating the new component. The
os/run/monitor.run script exercises memory inspection via the 'm' command
by letting a test program monitor itself. The os/run/monitor_gdb.run
script allows for the interactive use of GDB to interact with monitored
components.
Issue #4917
