dl.turnsys.net/librenms/smart

364 lines
9.5 KiB
Plaintext
Raw Permalink Normal View History

2022-01-20 00:48:06 +00:00
#!/usr/bin/env perl
#Copyright (c) 2017, Zane C. Bowers-Hadley
#All rights reserved.
#
#Redistribution and use in source and binary forms, with or without modification,
#are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
#ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
#BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
#THE POSSIBILITY OF SUCH DAMAGE.
=for comment
Add this to snmpd.conf like below.
extend smart /etc/snmp/smart
Then add to root's cron tab, if you have more than a few disks.
*/3 * * * * /etc/snmp/smart -u
You will also need to create the config file, which defaults to the same path as the script,
but with .config appended. So if the script is located at /etc/snmp/smart, the config file
will be /etc/snmp/smart.config. Alternatively you can also specific a config via -c.
Anything starting with a # is comment. The format for variables is $variable=$value. Empty
lines are ignored. Spaces and tabes at either the start or end of a line are ignored. Any
line with out a = or # are treated as a disk.
#This is a comment
cache=/var/cache/smart
smartctl=/usr/local/sbin/smartctl
useSN=0
ada0
ada1
The variables are as below.
cache = The path to the cache file to use. Default: /var/cache/smart
smartctl = The path to use for smartctl. Default: /usr/bin/env smartctl
useSN = If set to 1, it will use the disks SN for reporting instead of the device name.
1 is the default. 0 will use the device name.
If you want to guess at the configuration, call it with -g and it will print out what it thinks
it should be.
=cut
##
## You should not need to touch anything below here.
##
use warnings;
use strict;
use Getopt::Std;
my $cache='/var/cache/smart';
my $smartctl='/usr/bin/env smartctl';
my @disks;
my $useSN=1;
$Getopt::Std::STANDARD_HELP_VERSION = 1;
sub main::VERSION_MESSAGE {
print "SMART SNMP extend 0.0.0\n";
};
sub main::HELP_MESSAGE {
print "\n".
"-u Update '".$cache."'\n".
"-g Guess at the config and print it to STDOUT.\n".
"-c <config> The config file to use.\n";
}
#gets the options
my %opts=();
getopts('ugc:', \%opts);
# guess if asked
if ( defined( $opts{g} ) ){
#get what path to use for smartctl
$smartctl=`which smartctl`;
chomp($smartctl);
if ( $? != 0 ){
warn("'which smartctl' failed with a exit code of $?");
exit 1;
}
#try to touch the default cache location and warn if it can't be done
system('touch '.$cache.'>/dev/null');
if ( $? != 0 ){
$cache='#Could not touch '.$cache. "You will need to manually set it\n".
"cache=?\n";
}else{
$cache='cache='.$cache."\n";
}
my %found_disks;
#check for drives named /dev/sd*
my @matches=glob('/dev/sd*');
@matches=grep(!/[0-9]/, @matches);
my $matches_int=0;
while ( defined( $matches[$matches_int] ) ){
my $device=$matches[$matches_int];
system( $smartctl.' -A '.$device.' > /dev/null' );
if ( $? == 0 ){
$device =~ s/\/dev\///;
$found_disks{$device}=1;
}
$matches_int++;
}
#check for drives named /dev/ada*
@matches=glob('/dev/ada*');
@matches=grep(!/[ps]/, @matches);
$matches_int=0;
while ( defined( $matches[$matches_int] ) ){
my $device=$matches[$matches_int];
system( $smartctl.' -A '.$device.' > /dev/null' );
if ( $? == 0 ){
$device =~ s/\/dev\///;
$found_disks{$device}=1;
}
$matches_int++;
}
#check for drives named /dev/da*
@matches=glob('/dev/da*');
@matches=grep(!/[ps]/, @matches);
$matches_int=0;
while ( defined( $matches[$matches_int] ) ){
my $device=$matches[$matches_int];
system( $smartctl.' -A '.$device.' > /dev/null' );
if ( $? == 0 ){
$device =~ s/\/dev\///;
$found_disks{$device}=1;
}
$matches_int++;
}
#have smartctl scan and see if it finds anythings not get found
my $scan_output=`$smartctl --scan-open`;
my @scan_outputA=split(/\n/, $scan_output);
@scan_outputA=grep(!/ses[0-9]/, @scan_outputA); # not a disk, but may or may not have SMART attributes
@scan_outputA=grep(!/pass[0-9]/, @scan_outputA); # very likely a duplicate and a disk under another name
$matches_int=0;
while ( defined( $scan_outputA[$matches_int] ) ){
my $device=$scan_outputA[$matches_int];
$device =~ s/ .*//;
system( $smartctl.' -A '.$device.' > /dev/null' );
if ( $? == 0 ){
$device =~ s/\/dev\///;
$found_disks{$device}=1;
}
$matches_int++;
}
print "useSN=0\n".'smartctl='.$smartctl."\n".
$cache.
join( "\n", keys(%found_disks) )."\n";
exit 0;
}
#get which config file to use
my $config=$0.'.config';
if ( defined( $opts{c} ) ){
$config=$opts{c};
}
#reads the config file, optionally
my $config_file='';
open(my $readfh, "<", $config) or die "Can't open '".$config."'";
read($readfh , $config_file , 1000000);
close($readfh);
#parse the config file and remove comments and empty lines
my @configA=split(/\n/, $config_file);
@configA=grep(!/^$/, @configA);
@configA=grep(!/^\#/, @configA);
@configA=grep(!/^[\s\t]*$/, @configA);
my $configA_int=0;
while ( defined( $configA[$configA_int] ) ){
my $line=$configA[$configA_int];
$line=~s/^[\t\s]+//;
$line=~s/[\t\s]+$//;
my ( $var, $val )=split(/=/, $line, 2);
if ( $var eq 'cache' ){
$cache=$val;
}
if ( $var eq 'smartctl' ){
$smartctl=$val;
}
if ( $var eq 'useSN' ){
$useSN=$val;
}
if ( !defined( $val ) ){
push(@disks, $var);
}
$configA_int++;
}
#if set to 1, no cache will be written and it will be printed instead
my $noWrite=0;
# if no -u, it means we are being called from snmped
if ( ! defined( $opts{u} ) ){
# if the cache file exists, print it, otherwise assume one is not being used
if ( -f $cache ){
my $old='';
open(my $readfh, "<", $cache) or die "Can't open '".$cache."'";
read($readfh , $old , 1000000);
close($readfh);
print $old;
exit 0;
}else{
$opts{u}=1;
$noWrite=1;
}
}
my $toReturn='';
my $int=0;
while ( defined($disks[$int]) ) {
my $disk=$disks[$int];
my $disk_sn=$disk;
my $output=`$smartctl -A /dev/$disk`;
my %IDs=( '5'=>'null',
'10'=>'null',
'173'=>'null',
'177'=>'null',
'183'=>'null',
'184'=>'null',
'187'=>'null',
'188'=>'null',
'190'=>'null',
'194'=>'null',
'196'=>'null',
'197'=>'null',
'198'=>'null',
'199'=>'null',
'231'=>'null',
'233'=>'null',
);
my @outputA=split( /\n/, $output );
my $outputAint=0;
while ( defined($outputA[$outputAint]) ) {
my $line=$outputA[$outputAint];
$line=~s/^ +//;
$line=~s/ +/ /g;
if ( $line =~ /^[0123456789]+ / ) {
my @lineA=split(/\ /, $line, 10);
my $raw=$lineA[9];
my $id=$lineA[0];
# single int raw values
if (
( $id == 5 ) ||
( $id == 10 ) ||
( $id == 173 ) ||
( $id == 177 ) ||
( $id == 183 ) ||
( $id == 184 ) ||
( $id == 187 ) ||
( $id == 196 ) ||
( $id == 197 ) ||
( $id == 198 ) ||
( $id == 199 ) ||
( $id == 231 ) ||
( $id == 233 )
) {
$IDs{$id}=$raw;
}
# 188, Command_Timeout
if ( $id == 188 ) {
my $total=0;
my @rawA=split( /\ /, $raw );
my $rawAint=0;
while ( defined( $rawA[$rawAint] ) ) {
$total=$total+$rawA[$rawAint];
$rawAint++;
}
$IDs{$id}=$total;
}
# 190, airflow temp
# 194, temp
if (
( $id == 190 ) ||
( $id == 194 )
) {
my ( $temp )=split(/\ /, $raw);
$IDs{$id}=$temp;
}
}
$outputAint++;
}
#get the selftest logs
$output=`$smartctl -l selftest /dev/$disk`;
@outputA=split( /\n/, $output );
my $completed=scalar grep(/Completed without error/, @outputA);
my $interrupted=scalar grep(/Interrupted/, @outputA);
my $read_failure=scalar grep(/read failure/, @outputA);
my $unknown_failure=scalar grep(/unknown failure/, @outputA);
my $extended=scalar grep(/Extended/, @outputA);
my $short=scalar grep(/Short/, @outputA);
my $conveyance=scalar grep(/Conveyance/, @outputA);
my $selective=scalar grep(/Selective/, @outputA);
# get the drive serial number, if needed
my $disk_id=$disk;
if ( $useSN ){
while (`$smartctl -i /dev/$disk` =~ /Serial Number:(.*)/g) {
$disk_id = $1;
$disk_id =~ s/^\s+|\s+$//g;
}
}
$toReturn=$toReturn.$disk_id.','.$IDs{'5'}.','.$IDs{'10'}.','.$IDs{'173'}.','.$IDs{'177'}.','.$IDs{'183'}.','.$IDs{'184'}.','.$IDs{'187'}.','.$IDs{'188'}
.','.$IDs{'190'} .','.$IDs{'194'}.','.$IDs{'196'}.','.$IDs{'197'}.','.$IDs{'198'}.','.$IDs{'199'}.','.$IDs{'231'}.','.$IDs{'233'}.','.
$completed.','.$interrupted.','.$read_failure.','.$unknown_failure.','.$extended.','.$short.','.$conveyance.','.$selective."\n";
$int++;
}
if ( ! $noWrite ){
open(my $writefh, ">", $cache) or die "Can't open '".$cache."'";
print $writefh $toReturn;
close($writefh);
}else{
print $toReturn;
}