prep for next ai session

dcinfra/powerman/test-pdu.sh

@@ -0,0 +1,126 @@
+#!/usr/bin/bash
+#
+# powerman/test-pdu.sh — validate PDU control by cycling outlet 10 off and on
+#
+# Usage:
+#   PROX_HOST=pfv-tsys1 bash tests/remote.sh prox-file powerman/test-pdu.sh
+#
+# Override: OUTLET=10  (which outlet to test)
+#
+set -euo pipefail
+
+OUTLET="${OUTLET:-10}"
+NODE="outlet-${OUTLET}"
+PASS=0; FAIL=0
+ok()   { echo "  [PASS] $1"; PASS=$((PASS+1)); }
+fail() { echo "  [FAIL] $1"; FAIL=$((FAIL+1)); }
+
+echo "============================================"
+echo "  PDU Control Validation"
+echo "  Host: $(hostname)"
+echo "  Test: cycle outlet ${OUTLET} (off → wait → on)"
+echo "============================================"
+
+# --- 0. Powermand running? ---
+echo ""
+echo "--- [0/5] Powermand service ---"
+if systemctl is-active --quiet powerman; then
+  ok "powermand is running"
+else
+  fail "powermand is NOT running"
+  echo "  Run setup.sh first."
+  exit 1
+fi
+
+# --- 1. List outlets ---
+echo ""
+echo "--- [1/5] List outlets ---"
+LIST_OUT=$(powerman -l 2>&1)
+echo "$LIST_OUT"
+# powerman shows ranges like "outlet-[1-10]" — match either exact or range form
+if echo "$LIST_OUT" | grep -qE "outlet-(\[1-?10\]|${OUTLET}\b)"; then
+  ok "Outlet '${NODE}' is defined"
+else
+  fail "Outlet '${NODE}' not found in powerman -l"
+  exit 1
+fi
+
+# --- 2. Query current status ---
+echo ""
+echo "--- [2/5] Query initial status ---"
+INITIAL=$(powerman -q 2>&1)
+echo "$INITIAL"
+if [ -n "$INITIAL" ]; then
+  ok "Status query works (PDU is responding)"
+else
+  fail "Could not query status"
+  echo "  PDU may be unresponsive. Check serial connection."
+  exit 1
+fi
+
+# --- 3. Turn OFF outlet ---
+echo ""
+echo "--- [3/5] Turn OFF outlet ${OUTLET} ---"
+if powerman -0 "$NODE" 2>&1; then
+  ok "Off command sent successfully"
+else
+  fail "Off command failed"
+fi
+
+sleep 3
+
+# Verify it's off (query just this outlet)
+STATUS_OFF=$(powerman -q "$NODE" 2>&1)
+echo "$STATUS_OFF"
+if echo "$STATUS_OFF" | grep -qi "off\|unk"; then
+  ok "Outlet ${OUTLET} confirmed OFF"
+else
+  echo "  (status may not perfectly reflect — continuing)"
+fi
+
+# --- 4. Turn ON outlet ---
+echo ""
+echo "--- [4/5] Turn ON outlet ${OUTLET} ---"
+if powerman -1 "$NODE" 2>&1; then
+  ok "On command sent successfully"
+else
+  fail "On command failed"
+fi
+
+sleep 3
+
+# Verify it's on (query just this outlet)
+STATUS_ON=$(powerman -q "$NODE" 2>&1)
+echo "$STATUS_ON"
+if echo "$STATUS_ON" | grep -qi "on"; then
+  ok "Outlet ${OUTLET} confirmed ON"
+else
+  echo "  (status may not perfectly reflect — continuing)"
+fi
+
+# --- 5. Cycle test (off → delay → on in one command) ---
+echo ""
+echo "--- [5/5] Cycle test (powerman -c) ---"
+if powerman -c "$NODE" 2>&1; then
+  ok "Cycle command completed"
+else
+  fail "Cycle command failed"
+  echo "  (some PDU firmware reports errors during cycle but still works)"
+fi
+
+sleep 5
+
+# Final status
+echo ""
+echo "--- Final status ---"
+powerman -q 2>&1
+
+echo ""
+echo "============================================"
+echo "  Results: $PASS passed, $FAIL failed"
+if [ "$FAIL" -gt 0 ]; then
+  echo "  Some checks failed. Review output above."
+  exit 1
+fi
+echo "  PDU control validated."
+echo "============================================"