tahoe-lafs/docs/INSTALL.rst

.. -*- coding: utf-8-with-signature-unix; fill-column: 77 -*-

..
    note: if you aren't reading the rendered form of these docs at
    http://tahoe-lafs.readthedocs.io/en/latest/ , then be aware that any
    ":doc:" links refer to other files in this docs/ directory

*********************
Installing Tahoe-LAFS
*********************

Welcome to `the Tahoe-LAFS project`_, a secure, decentralized, fault-tolerant
storage system. See :doc:`about` for an overview of the architecture and
security properties of the system.

This procedure should work on Windows, Mac, illumos (previously OpenSolaris),
and too many flavors of Linux and of BSD to list.

.. _the Tahoe-LAFS project: https://tahoe-lafs.org

First: In Case Of Trouble
=========================

In some cases these instructions may fail due to peculiarities of your
platform.

If the following instructions don't Just Work without any further effort on
your part, then please write to `the tahoe-dev mailing list`_ where friendly
hackers will help you out.

.. _the tahoe-dev mailing list: https://tahoe-lafs.org/cgi-bin/mailman/listinfo/tahoe-dev

Pre-Packaged Versions
=====================

You may not need to build Tahoe at all.

If you are on Windows, please see :doc:`windows` for platform-specific
instructions.

If you are on a Mac, you can either follow these instructions, or use the
pre-packaged bundle described in :doc:`OS-X`.

Many Linux distributions include Tahoe-LAFS packages. Debian and Ubuntu users
can ``apt-get install tahoe-lafs``. See `OSPackages`_ for other
platforms.

.. _OSPackages: https://tahoe-lafs.org/trac/tahoe-lafs/wiki/OSPackages


Preliminaries
=============

If you don't use a pre-packaged copy of Tahoe, you can build it yourself.
You'll need Python2.7, pip, and virtualenv.
Tahoe-LAFS depends on some libraries which require a C compiler to build.
However, for many platforms, PyPI hosts already-built packages of libraries.

If there is no already-built package for your platform,
you will need a C compiler,
the Python development headers,
and some libraries (libffi-dev and libssl-dev).

On a modern Debian/Ubuntu-derived distribution, this command will get you
everything you need::

    apt-get install build-essential python-dev libffi-dev libssl-dev libyaml-dev python-virtualenv

On OS-X, install pip and virtualenv as described below. If you want to
compile the dependencies yourself, you'll also need to install
Xcode and its command-line tools.

**Note** that Tahoe-LAFS depends on `openssl 1.1.1c` or greater.

Python 2.7
----------

Check if you already have an adequate version of Python installed by running
``python -V``. The latest version of Python v2.7 is recommended, which is
2.7.11 as of this writing. Python v2.6.x and v3 do not work. On Windows, we
recommend the use of native Python v2.7, not Cygwin Python. If you don't have
one of these versions of Python installed, `download`_ and install the latest
version of Python v2.7. Make sure that the path to the installation directory
has no spaces in it (e.g. on Windows, do not install Python in the "Program
Files" directory)::

    % python --version
    Python 2.7.11

.. _download: https://www.python.org/downloads/

pip
---

Many Python installations already include ``pip``, but in case yours does
not, get it with the `pip install instructions`_::

    % pip --version
    pip 10.0.1 from ... (python 2.7)

.. _pip install instructions: https://pip.pypa.io/en/stable/installing/

virtualenv
----------

If you do not have an OS-provided copy of ``virtualenv``, install it with the
instructions from the `virtualenv documentation`_::


    % virtualenv --version
    15.1.0

.. _virtualenv documentation: https://virtualenv.pypa.io/en/latest/installation.html

C compiler and libraries
------------------------

Except on OS-X, where the Tahoe project hosts pre-compiled wheels for all
dependencies, you will need several C libraries installed before you can
build. You will also need the Python development headers, and a C compiler
(your python installation should know how to find these).

On Debian/Ubuntu-derived systems, the necessary packages are ``python-dev``,
``libffi-dev``, and ``libssl-dev``, and can be installed with ``apt-get``. On
RPM-based system (like Fedora) these may be named ``python-devel``, etc,
instead, and cam be installed with ``yum`` or ``rpm``.

**Note** that Tahoe-LAFS depends on `openssl 1.1.1c` or greater.


Install the Latest Tahoe-LAFS Release
=====================================

We recommend creating a fresh virtualenv for your Tahoe-LAFS install, to
isolate it from any python packages that are already installed (and to
isolate the rest of your system from Tahoe's dependencies).

This example uses a virtualenv named ``venv``, but you can call it anything
you like. Many people prefer to keep all their virtualenvs in one place, like
``~/.local/venvs/`` or ``~/venvs/``.

It's usually a good idea to upgrade the virtualenv's ``pip`` and
``setuptools`` to their latest versions, with ``venv/bin/pip install -U pip
setuptools``. Many operating systems have an older version of ``virtualenv``,
which then includes older versions of pip and setuptools. Upgrading is easy,
and only affects the virtualenv: not the rest of your computer.

Then use the virtualenv's ``pip`` to install the latest Tahoe-LAFS release
from PyPI with ``venv/bin/pip install tahoe-lafs``. After installation, run
``venv/bin/tahoe --version`` to confirm the install was successful::

 % virtualenv venv
 New python executable in ~/venv/bin/python2.7
 Installing setuptools, pip, wheel...done.

 % venv/bin/pip install -U pip setuptools
 Downloading/unpacking pip from https://pypi.python.org/...
 ...
 Successfully installed pip setuptools

 % venv/bin/pip install tahoe-lafs
 Collecting tahoe-lafs
 ...
 Installing collected packages: ...
 Successfully installed ...

 % venv/bin/tahoe --version
 tahoe-lafs: 1.14.0
 foolscap: ...

 %

Install From a Source Tarball
-----------------------------

You can also install directly from the source tarball URL. To verify
signatures, first see verifying_signatures_ and replace the URL in the
following instructions with the local filename.

 % virtualenv venv
 New python executable in ~/venv/bin/python2.7
 Installing setuptools, pip, wheel...done.

 % venv/bin/pip install https://tahoe-lafs.org/downloads/tahoe-lafs-1.14.0.tar.bz2
 Collecting https://tahoe-lafs.org/downloads/tahoe-lafs-1.14.0.tar.bz2
 ...
 Installing collected packages: ...
 Successfully installed ...

 % venv/bin/tahoe --version
 tahoe-lafs: 1.14.0
 ...

.. _verifying_signatures:

Verifying Signatures
--------------------

First download the source tarball and then any signatures. There are several
developers who are able to produce signatures for a release. A release may
have multiple signatures. All should be valid and you should confirm at least
one of them (ideally, confirm all).

This statement, signed by the existing Tahoe release-signing key, attests to
those developers authorized to sign a Tahoe release:

.. include:: developer-release-signatures
   :code:

Signatures are made available beside the release. So for example, a release
like ``https://tahoe-lafs.org/downloads/tahoe-lafs-1.16.0.tar.bz2`` might
have signatures ``tahoe-lafs-1.16.0.tar.bz2.meejah.asc`` and
``tahoe-lafs-1.16.0.tar.bz2.warner.asc``.

To verify the signatures using GnuPG::

  % gpg --verify tahoe-lafs-1.16.0.tar.bz2.meejah.asc tahoe-lafs-1.16.0.tar.bz2
  gpg: Signature made XXX
  gpg:                using RSA key 9D5A2BD5688ECB889DEBCD3FC2602803128069A7
  gpg: Good signature from "meejah <meejah@meejah.ca>" [full]
  % gpg --verify tahoe-lafs-1.16.0.tar.bz2.warner.asc tahoe-lafs-1.16.0.tar.bz2
  gpg: Signature made XXX
  gpg:                using RSA key 967EFE06699872411A77DF36D43B4C9C73225AAF
  gpg: Good signature from "Brian Warner <warner@lothar.com>" [full]



Extras
------

Tahoe-LAFS provides some functionality only when explicitly requested at installation time.
It does this using the "extras" feature of setuptools.
You can request these extra features when running the ``pip install`` command like this::

  % venv/bin/pip install tahoe-lafs[tor]

This example enables support for listening and connecting using Tor.
The Tahoe-LAFS documentation for specific features which require an explicit install-time step will mention the "extra" that must be requested.

Hacking On Tahoe-LAFS
---------------------

To modify the Tahoe source code, you should get a git checkout, and install
with the ``--editable`` flag. You should also use the ``[test]`` extra to get
the additional libraries needed to run the unit tests::

 % git clone https://github.com/tahoe-lafs/tahoe-lafs.git

 % cd tahoe-lafs

 % virtualenv venv

 % venv/bin/pip install --editable .[test]
 Obtaining file::~/tahoe-lafs
 ...
 Successfully installed ...

 % venv/bin/tahoe --version
 tahoe-lafs: 1.14.0.post34.dev0
 ...

This way, you won't have to re-run the ``pip install`` step each time you
modify the source code.

Running the ``tahoe`` executable
================================

The rest of the Tahoe-LAFS documentation assumes that you can run the
``tahoe`` executable that you just created. You have four basic options:

* Use the full path each time (e.g. ``~/venv/bin/tahoe``).
* "`Activate`_" the virtualenv with ``. venv/bin/activate``, to get a
  subshell with a ``$PATH`` that includes the ``venv/bin/`` directory, then
  you can just run ``tahoe``.
* Change your ``$PATH`` to include the ``venv/bin/`` directory, so you can
  just run ``tahoe``.
* Symlink from ``~/bin/tahoe`` to the ``tahoe`` executable. Since ``~/bin``
  is typically in your ``$PATH`` (at least if it exists when you log in),
  this will let you just run ``tahoe``.

You might also find the `pipsi`_ tool convenient: ``pipsi install
tahoe-lafs`` will create a new virtualenv, install tahoe into it, then
symlink just the executable (into ``~/.local/bin/tahoe``). Then either add
``~/.local/bin/`` to your ``$PATH``, or make one last symlink into
``~/bin/tahoe``.

.. _Activate: https://virtualenv.pypa.io/en/latest/userguide.html#activate-script
.. _pipsi: https://pypi.python.org/pypi/pipsi/0.9

Running the Self-Tests
======================

To run the self-tests from a source tree, you'll need ``tox`` installed. On a
Debian/Ubuntu system, use ``apt-get install tox``. You can also install it
into your tahoe-specific virtualenv with ``pip install tox``.

Then just run ``tox``. This will create a new fresh virtualenv, install Tahoe
(from the source tree, including any changes you have made) and all its
dependencies (including testing-only dependencies) into the virtualenv, then
run the unit tests. This ensures that the tests are repeatable and match the
results of other users, unaffected by any other Python packages installed on
your machine. On a modern computer this will take 5-10 minutes, and should
result in a "all tests passed" mesage::

 % tox
 GLOB sdist-make: ~/tahoe-lafs/setup.py
 py27 recreate: ~/tahoe-lafs/.tox/py27
 py27 inst: ~/tahoe-lafs/.tox/dist/tahoe-lafs-1.14.0.post8.dev0.zip
 py27 runtests: commands[0] | tahoe --version
 py27 runtests: commands[1] | trial --rterrors allmydata
 allmydata.test.test_auth
   AccountFileCheckerKeyTests
     test_authenticated ...                                           [OK]
     test_missing_signature ...                                       [OK]
  ...
 Ran 1186 tests in 423.179s

 PASSED (skips=7, expectedFailures=3, successes=1176)
 __________________________ summary ___________________________________
   py27: commands succeeded
   congratulations :)

Common Problems
===============

If you see an error like ``fatal error: Python.h: No such file or directory``
while compiling the dependencies, you need the Python development headers. If
you are on a Debian or Ubuntu system, you can install them with ``sudo
apt-get install python-dev``. On RedHat/Fedora, install ``python-devel``.

Similar errors about ``openssl/crypto.h`` indicate that you are missing the
OpenSSL development headers (``libssl-dev``). Likewise ``ffi.h`` means you
need ``libffi-dev``.

**Note** that Tahoe-LAFS depends on `openssl 1.1.1c` or greater.


Using Tahoe-LAFS
================

Now you are ready to deploy a decentralized filesystem. You will use the
``tahoe`` executable to create, configure, and launch your Tahoe-LAFS nodes.
See :doc:`running` for instructions on how to do that.