Zooko O'Whielacronx
2a476a2d90
setup: tell setuptools that we depend on pycryptopp >= 0.2.3
2007-11-07 17:55:18 -07:00
Zooko O'Whielacronx
494e07eced
setup: upgrade to pycryptopp v0.2.3
2007-11-07 17:54:46 -07:00
Brian Warner
be94960680
mutable: test roundtrip, make it work
2007-11-07 14:19:01 -07:00
Brian Warner
ba43c033fa
storage.py: add a little logging (disabled)
2007-11-07 14:14:54 -07:00
Zooko O'Whielacronx
3c222bbe26
setup: print out the version number of pycryptopp in "tahoe --version"
2007-11-07 10:11:56 -07:00
Zooko O'Whielacronx
a924872c52
CREDITS: more credit to nejucomo since we accepted a doc patch
2007-11-07 10:01:07 -07:00
Zooko O'Whielacronx
8333a20243
README: fix whitespace
2007-11-07 10:00:57 -07:00
Zooko O'Whielacronx
e8be763a41
setup: add Crypto++ and pycryptopp to dependencies
...
Crypto++ is a new manual dependency (boo hoo), and pycryptopp is a new automatic dependency.
2007-11-07 10:00:13 -07:00
Zooko O'Whielacronx
b699c28b67
setup: add misc/dependencies/pycryptopp-0.2.1.tar.gz
2007-11-07 09:59:51 -07:00
nejucomo
4589d73e02
Add "sizelimit" to configuration doc.
2007-11-05 01:46:42 -07:00
Brian Warner
a46e64b0bb
test_system.mutable: make sure we exercise FEC padding
2007-11-06 19:50:33 -07:00
Brian Warner
cc5d35cc07
dump-share: emit SDMF information too
2007-11-06 19:46:31 -07:00
Brian Warner
fdbe692810
add container_size to mutable dump-share output
2007-11-06 19:31:22 -07:00
Brian Warner
8be9ef5149
mutable: stub out pubkey creation until we wire in pycryptopp properly
2007-11-06 19:27:06 -07:00
Brian Warner
ddf4d23bef
test_system.mutable: add test coverage for the 'dump-share' debug command
2007-11-06 19:10:49 -07:00
Brian Warner
bc8605ad39
test_system: add early test for mutable slots, currently publish-only
2007-11-06 18:57:11 -07:00
Brian Warner
530085df4a
test_mutable: remove dead code
2007-11-06 18:56:39 -07:00
Brian Warner
0b2f62466b
debug: add mutable-slot support to 'dump-share' command
2007-11-06 18:55:55 -07:00
Brian Warner
5739126d11
mutable: storage_index is always 16 bytes
2007-11-06 18:54:34 -07:00
Brian Warner
7e43c7b5f9
mutable: fix use of storage API
2007-11-06 18:53:34 -07:00
Brian Warner
c4f7412f1c
stabilize on 20-byte nodeids everywhere, printed with foolscap's base32
2007-11-06 18:49:59 -07:00
Brian Warner
7cf9a13f2a
mutable: rearrange classes, putting MutableFileNode at the bottom
2007-11-06 15:19:48 -07:00
Brian Warner
c595f6ccd0
mutable: parameterize Publish/Retrieve classes in MutableFileNode, for tests
2007-11-06 15:18:09 -07:00
Brian Warner
2ed394e471
mutable: move IV into signed prefix, add more retrieval code
2007-11-06 15:04:46 -07:00
Brian Warner
207888a97b
mutable: get most of the retrieve-side code written. no tests yet.
2007-11-06 03:47:29 -07:00
Brian Warner
a431411418
test_mutable.py: hush pyflakes
2007-11-06 01:32:39 -07:00
Brian Warner
85a56a3d74
mutable.Publish: rearrange create() to use more of it in unit tests
2007-11-06 00:33:40 -07:00
Brian Warner
8cdda6e199
mutable.Publish: more tests
2007-11-05 22:38:43 -07:00
Brian Warner
281afe7cfc
mutable.Publish: create a dispatch_map for the benefit of recovery code, and pull pack/unpack methods out into functions
2007-11-05 22:14:59 -07:00
Brian Warner
59632c6812
mutable: use proper enable/renew/cancel secrets
2007-11-05 21:51:08 -07:00
Brian Warner
1e8a693512
Makefile: add 'find-trailing-spaces' tool and target
2007-11-05 21:32:08 -07:00
Brian Warner
fade06ef4d
mutable: added send-messages-to-peers code, about 70% done. No recovery code yet.
2007-11-05 21:29:47 -07:00
Brian Warner
e08b091d9f
storage: rewrite slot API, now use testv_and_readv_and_writev or readv
2007-11-05 20:17:14 -07:00
Brian Warner
95a3da92fe
test_mutable: hush pyflakes warning
2007-11-05 00:41:53 -07:00
Brian Warner
27b67ef0d6
mutable: add peer-selection to Publish, and some basic unit tests
2007-11-05 00:38:07 -07:00
Brian Warner
8f21424449
storage: add readv_slots: get data from all shares
2007-11-05 00:37:01 -07:00
Brian Warner
6137329f05
mutable.py: start writing share-mapping code
2007-11-02 22:59:02 -07:00
Brian Warner
b70bda01f1
Makefile: add simple 'repl' target to start a python interpreter with a useful PYTHONPATH
2007-11-02 22:32:55 -07:00
Brian Warner
6e5b799d46
mutable.py: add share-unpacking code, use it for more tests
2007-11-02 22:28:31 -07:00
Brian Warner
70bd92f24d
mutable.txt: need offset of EOF too
2007-11-02 22:28:07 -07:00
Brian Warner
49cc32d012
mutable.txt: more notes
2007-11-02 20:53:41 -07:00
Brian Warner
78c45c82d1
mutable: implement filenode share-packing, still pretty rough
2007-11-02 20:51:39 -07:00
Brian Warner
6510510ea7
mutable.py: sketch out data-structure packing/unpacking methods
2007-11-02 00:03:28 -07:00
Brian Warner
d772ea850d
mutable: split dirnode stuff out to dirnode2.py, will be renamed later
2007-11-01 23:46:47 -07:00
Brian Warner
1158c4aae5
test_client: increase test_reloadable inter-run timeout, cygwin was failing
2007-11-01 19:19:08 -07:00
Brian Warner
f1c3ff62c1
mutable: improve NewDirectoryNode test coverage
2007-11-01 18:35:54 -07:00
Brian Warner
d777283e9e
implement preliminary log publisher/gatherer
...
This creates a Referenceable object that will eventually be able to publish
log events to a remote subscriber (at present all it can do is provide
version information). The FURL for this logport is written to 'logport.furl'.
In addition, if a file named 'log_gatherer.furl' is present, the given target
will be contacted and offered access to the logport. This can be used by a
centralized logging agent to subscribe to logs, e.g. from all the nodes in a
centrally-maintained storage grid. (think syslog -r, but with all the
security properties of FURLs, and permitting non-printable strings and
structured data).
Once this framework matures a bit, it will be moved into Foolscap.
2007-11-01 17:29:15 -07:00
Brian Warner
97f4d8c524
Client.tub_ready: upcall to Node
2007-11-01 17:27:12 -07:00
Brian Warner
36921fedb3
mutable: implement most remaining dirnode methods. No tests yet.
2007-11-01 16:57:58 -07:00
Brian Warner
57373c9889
bencode.py: reencode as UTF-8
2007-11-01 15:42:57 -07:00
