Daniel Golle b38b5c4299 ramips: add support for MeiG SLT866 4G CPE ... Hardware: - SoC: Mediatek MT7621 (MT7621AT) - Flash: 32 MiB SPI-NOR (Macronix MX25L25635E) - RAM: 128 MiB - Ethernet: Built-in, 2 x 1GbE - 3G/4G Modem: MEIG SLM828 (currently only supported with ModemManager) - SLIC: Si32185 (unsupported) - Power: 12V via barrel connector - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b - Wifi 5GHz: Mediatek MT7613BE 802.11ac/n/a - LEDs: 8x (7 controllable) - Buttons: 2x (RESET, WPS) Installing OpenWrt: - sysupgrade image is compatible with vendor firmware. Recovery: - Connect to any of the Ethernet ports, configure local IP: 10.10.10.3/24 (or 192.168.10.19/24, depending on OEM) - Provide firmware file named 'mt7621.img' on TFTP server. - Hold down both, RESET and WPS, then power on the board. - Watch network traffic using tcpdump or wireshark in realtime to observe progress of device requesting firmware. Once download has completed, release both buttons and wait until firmware comes up. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit bc335f2967)		2023-11-13 00:58:08 +00:00
..
base-files	ramips: add support for MeiG SLT866 4G CPE	2023-11-13 00:58:08 +00:00
config-5.15	ramips: mt7621: disable highmem support and remove highmem offset patch	2023-07-24 20:19:11 +02:00
target.mk	mt7621: move uboot-envtools to DEFAULT_PACKAGES	2023-03-01 23:24:23 +01:00