ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
f56a4e809b
openwrt/target/linux/ipq806x/files-4.14/arch/arm/boot/dts
History
INAGAKI Hiroshi 51fe956c4f ipq806x: add support for Buffalo WXR-2533DHP 
Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.

The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.

specifications:

- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
  - J3: Vcc, GND, TX, RX from USB port side
  - 115200n8

Boot instructions for the initramfs image:

1. Prepare the TFTP server with the initramfs image renamed to
   "wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
   The WXR-2533DHP will grab the image from TFTP server and will boot it.

Flashing instructions:

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
2019-01-01 16:39:59 +01:00
..
qcom-ipq8064-ap148.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-ap161.dts ipq806x: dts: Add support for RGMII RX and TX clock delays 2018-12-06 08:15:50 +01:00
qcom-ipq8064-c2600.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-d7800.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-db149.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-ea8500.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-r7500.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-r7500v2.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-v2.0.dtsi ipq806x: fix pcie tx termination offset 2018-05-22 20:34:14 +02:00
qcom-ipq8064-vr2600v.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-wg2600hp.dts ipq806x: fix and cleanup dts for NEC WG2600HP 2018-12-12 18:59:01 +01:00
qcom-ipq8064-wpq864.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8064-wxr-2533dhp.dts ipq806x: add support for Buffalo WXR-2533DHP 2019-01-01 16:39:59 +01:00
qcom-ipq8064.dtsi ipq806x: add support for Buffalo WXR-2533DHP 2019-01-01 16:39:59 +01:00
qcom-ipq8065-nbg6817.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8065-r7800.dts treewide: replace 'linux, stdout-path' with 'stdout-path' 2018-09-29 17:23:11 +02:00
qcom-ipq8065.dtsi ipq806x: move mmc specific nodes into v1.0 dtsi 2018-05-22 20:34:14 +02:00