openwrt/target/linux/mpc85xx/patches-4.19
David Bauer 16b01fb1b9 mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------

SoC:   NXP P1020 (2x e500 @ 800MHz)
RAM:   256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN:   1x Reset
WiFi:  1x Atheros AR9590 2.4 bgn 3x3
       2x Atheros AR9590 5.0 an 3x3
ETH:   1x Gigabit Ethernet (Atheros AR8033)
LED:   System (green/red) - Radio{0,1} (green)
       LAN (connected to PHY)
        - GE blue
        - FE green

Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.

Installation
------------

1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
   the root directory of a TFTP server and serve it at
   192.168.200.200/24.

2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
   by pressing Enter when prompted. Credentials are identical to the one
   in the APs interface. By default it is admin / new2day.

3. Set the bootcmd so the AP can boot OpenWrt by executing

   $ setenv boot_openwrt "setenv bootargs;
     cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
   $ setenv bootcmd "run boot_openwrt"
   $ saveenv

   If you plan on going back to the vendor firmware - the bootcmd for it
   is stored in the boot_flash variable.

4. Load the initramfs image to RAM and boot by executing

   $ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm

5. Make a backup of the "firmware" partition if you ever wish to go back
   to the vendor firmware.

6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
   folder.

7. Flash OpenWrt using sysupgrade.

   $ sysupgrade -n /tmp/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-12-13 22:40:19 +01:00
..
001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
100-powerpc-85xx-tl-wdr4900-v1-support.patch kernel: bump 4.19 to 4.19.50 2019-06-12 15:04:09 +02:00
101-powerpc-85xx-hiveap-330-support.patch
102-powerpc-add-cmdline-override.patch
103-powerpc-85xx-red-15w-rev1.patch mpc85xx: add support for Sophos RED 15w Rev.1 2019-01-13 11:31:43 +01:00
104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch mpc85xx: add support for Freescale (NXP) P2020RDB 2019-01-13 11:31:43 +01:00
105-powerpc-85xx-panda-support.patch kernel: bump 4.19 to 4.19.18 2019-01-28 18:17:32 +01:00
106-powerpc-85xx-ws-ap3710i-support.patch mpc85xx: add support for Enterasys WS-AP3710i 2019-12-13 22:40:19 +01:00