mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
mpc85xx: add support for Sophos RED 15w Rev.1
Hardware
========
CPU: Freescale P1010 PowerPC
RAM: 128M DDR3
NAND: 128MiB
ETH: RTL8211F SGMII PHY
RTL8367B 5-port RGMII switch
(not connected to SoC - unmanaged)
WiFi: SparkLan WPEA-121N
- Atheros AR9382 2T2R abgn
USB: 1x USB 2.0
LED: System, Router, Internet, Tunnel controllable
LAN1-4, WAN, Power non-controllable
BTN: None
Installation
============
1. Power on the device while attached to the Console port.
2. Halt the U-Boot by pressing Enter when prompted.
3. Set the correct bootcmd for booting OpenWRT:
> setenv bootargs_owrt "setenv bootargs console=ttyS0,115200"
> setenv bootcmd "run bootargs_owrt;
nand read 0x1000000 0x300000 0x800000;
bootm 0x1000000;"
> saveenv
5. Rename OpenWRT initramfs image to 'kernel.bin' and place it in a
TFTP server root-directory served on 192.168.1.2/24. Connect your
computer to one of the LAN-ports.
4. Boot OpenWRT initramfs image with
> run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin;
bootm 0x1000000;
6. (Optional)
Make a Backup of 'sophos-os1', 'sophos-os2' and 'sophos-data' in case
you ever want to go back to the vendor firmware.
7. Create Ubi Volume on mtd4 by executing
> ubiformat /dev/mtd4 -y
8. Transfer OpenWRT sysupgrade image to the device via SCP and install it
with
> sysupgrade -n <openwrt-image-file>
Back to Stock
=============
If you want to go back to the stock firmware, here is the bootcmd of the
vendor firmware:
> setenv bootargs console=ttyS0,115200 root=/dev/mtdblock5;
nand read 0xc00000 0x00300000 0x100000;
nand read 0x1000000 0x00400000 0x00800000;
bootm 0x1000000 - 0xc00000
Set it via 'setenv' from the U-Boot shell and don't forget to save it
using 'saveenv'!
After this, boot the OpenWRT initramfs image just like you would for
installation. Write back the three vendor partitions using mtd. Reboot
the device afterwards.
Signed-off-by: David Bauer <mail@david-bauer.net>
[refresh and reorder patches]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
David Bauer
Christian Lamparter
parent
85be0f4c21
commit
97e4311fca
@ -10,7 +10,7 @@ ARCH:=powerpc
|
||||
BOARD:=mpc85xx
|
||||
BOARDNAME:=Freescale MPC85xx
|
||||
CPU_TYPE:=8540
|
||||
FEATURES:=squashfs
|
||||
FEATURES:=squashfs ramdisk
|
||||
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
|
||||
SUBTARGETS:=generic p1020 p2020
|
||||
|
||||
|
||||
@ -9,6 +9,9 @@ get_status_led() {
|
||||
aerohive,hiveap-330)
|
||||
status_led="hiveap-330:green:tricolor0"
|
||||
;;
|
||||
sophos,red-15w-rev1)
|
||||
status_led="red-15w-rev1:green:system"
|
||||
;;
|
||||
tplink,tl-wdr4900-v1)
|
||||
status_led="tp-link:blue:system"
|
||||
;;
|
||||
|
||||
@ -0,0 +1,20 @@
|
||||
#!/bin/ash
|
||||
|
||||
[ "$ACTION" == "add" ] || exit 0
|
||||
|
||||
PHYNBR=${DEVPATH##*/phy}
|
||||
|
||||
[ -n $PHYNBR ] || exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
sophos,red-15w-rev1)
|
||||
echo $(mtd_get_mac_ascii u-boot-env ethaddr) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
@ -9,4 +9,15 @@ platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
# use default for platform_do_upgrade()
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
sophos,red-15w-rev1)
|
||||
nand_do_upgrade "$ARGV"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$ARGV"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
@ -306,6 +306,7 @@ CONFIG_QUICC_ENGINE=y
|
||||
CONFIG_RAS=y
|
||||
# CONFIG_RCU_NEED_SEGCBLIST is not set
|
||||
# CONFIG_RCU_STALL_COMMON is not set
|
||||
# CONFIG_RED_15W_REV1 is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
|
||||
@ -269,6 +269,7 @@ CONFIG_QE_GPIO=y
|
||||
CONFIG_QE_USB=y
|
||||
CONFIG_QUICC_ENGINE=y
|
||||
CONFIG_RAS=y
|
||||
# CONFIG_RED_15W_REV1 is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
|
||||
@ -0,0 +1,207 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
|
||||
|
||||
/include/ "fsl/p1010si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sophos RED 15w Rev.1";
|
||||
compatible = "sophos,red-15w-rev1";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system_green {
|
||||
gpios = <&gpio0 7 0>;
|
||||
label = "red-15w-rev1:green:system";
|
||||
};
|
||||
|
||||
system_red {
|
||||
gpios = <&gpio0 3 0>;
|
||||
label = "red-15w-rev1:red:system";
|
||||
};
|
||||
|
||||
router {
|
||||
gpios = <&gpio0 5 1>;
|
||||
label = "red-15w-rev1:green:router";
|
||||
};
|
||||
|
||||
internet {
|
||||
gpios = <&gpio0 4 1>;
|
||||
label = "red-15w-rev1:green:internet";
|
||||
};
|
||||
|
||||
tunnel {
|
||||
gpios = <&gpio0 8 1>;
|
||||
label = "red-15w-rev1:green:tunnel";
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
i2c@3000 {
|
||||
eeprom@50 {
|
||||
compatible = "st,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c01";
|
||||
reg = < 0x52 >;
|
||||
};
|
||||
};
|
||||
|
||||
gpio0: gpio-controller@fc00 {
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "utmi";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
tbi_phy: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "sgmii";
|
||||
|
||||
tbi-handle = <&tbi_phy>;
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhc@2e000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
ifc: ifc@ffe1e000 {
|
||||
reg = <0x0 0xffe1e000 0 0x2000>;
|
||||
|
||||
/* NOR, NAND Flashes and CPLD on board */
|
||||
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
|
||||
0x1 0x0 0x0 0xff800000 0x00010000
|
||||
0x3 0x0 0x0 0xffb00000 0x00000020>;
|
||||
|
||||
nand@1,0 {
|
||||
compatible = "fsl,ifc-nand";
|
||||
reg = <0x1 0x0 0x10000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/*
|
||||
* Original partition layout:
|
||||
* 0x000000000000-0x000000100000 : "NAND U-Boot Image"
|
||||
* 0x000000100000-0x000000200000 : "NAND U-Boot Environment"
|
||||
* 0x000000200000-0x000000300000 : "Provisioning"
|
||||
* - OS-Image 1
|
||||
* 0x000000300000-0x000000400000 : "fdt1"
|
||||
* 0x000000400000-0x000000c00000 : "uimage1"
|
||||
* 0x000000c00000-0x000001c00000 : "rootfs1"
|
||||
* - OS-Image 2
|
||||
* 0x000001c00000-0x000001d00000 : "fdt2"
|
||||
* 0x000001d00000-0x000002500000 : "uimage2"
|
||||
* 0x000002500000-0x000003500000 : "rootfs2"
|
||||
* - Empty
|
||||
* 0x000003500000-0x000008000000 : "data"
|
||||
*/
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x100000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
reg = <0x100000 0x100000>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
reg = <0x200000 0x100000>;
|
||||
label = "provisioning";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
reg = <0x300000 0x800000>;
|
||||
label = "kernel";
|
||||
};
|
||||
|
||||
partition@b00000 {
|
||||
reg = <0xb00000 0x7500000>;
|
||||
label = "ubi";
|
||||
};
|
||||
|
||||
oem-partition@300000 {
|
||||
reg = <0x300000 0x1900000>;
|
||||
label = "sophos-os1";
|
||||
};
|
||||
|
||||
oem-partition@1c00000 {
|
||||
reg = <0x1c00000 0x1900000>;
|
||||
label = "sophos-os2";
|
||||
};
|
||||
|
||||
oem-partition@3500000 {
|
||||
reg = <0x3500000 0x4b00000>;
|
||||
label = "sophos-data";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p1010si-post.dtsi"
|
||||
@ -0,0 +1,87 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
/*
|
||||
* Sophos RED 15w Rev.1 Board Setup
|
||||
*
|
||||
* Copyright (C) 2019 David Bauer <mail@david-bauer.net>
|
||||
*
|
||||
* Based on:
|
||||
* p1010rdb.c:
|
||||
* P1010 RDB Board Setup
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
|
||||
#include "mpc85xx.h"
|
||||
|
||||
void __init red_15w_rev1_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic;
|
||||
|
||||
mpic = mpic_alloc(NULL, 0,
|
||||
MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
|
||||
BUG_ON(mpic == NULL);
|
||||
mpic_init(mpic);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init red_15w_rev1_setup_arch(void)
|
||||
{
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("red_15w_rev1_setup_arch()", 0);
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
pr_info("RED 15w Rev.1 from Sophos\n");
|
||||
}
|
||||
|
||||
machine_arch_initcall(red_15w_rev1, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init red_15w_rev1_probe(void)
|
||||
{
|
||||
if (of_machine_is_compatible("sophos,red-15w-rev1"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(red_15w_rev1) {
|
||||
.name = "P1010 RDB",
|
||||
.probe = red_15w_rev1_probe,
|
||||
.setup_arch = red_15w_rev1_setup_arch,
|
||||
.init_IRQ = red_15w_rev1_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
@ -1,3 +1,19 @@
|
||||
# CONFIG_FSL_CORENET_CF is not set
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_TPLINK_FW=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_REALTEK_PHY=y
|
||||
CONFIG_RED_15W_REV1=y
|
||||
CONFIG_TL_WDR4900_V1=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
|
||||
@ -1,4 +1,5 @@
|
||||
BOARDNAME:=Generic
|
||||
FEATURES+=nand
|
||||
KERNELNAME:=cuImage.tl-wdr4900-v1
|
||||
|
||||
define Target/Description
|
||||
|
||||
@ -58,6 +58,18 @@ define Device/tl-wdr4900-v1
|
||||
endef
|
||||
TARGET_DEVICES += tl-wdr4900-v1
|
||||
|
||||
define Device/red-15w-rev1
|
||||
DEVICE_TITLE := Sophos RED 15w Rev.1
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
# Original firmware uses a dedicated DTB-partition.
|
||||
# The bootloader however supports FIT-images.
|
||||
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
||||
SUPPORTED_DEVICES := sophos,red-15w-rev1
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += red-15w-rev1
|
||||
|
||||
endif
|
||||
|
||||
ifeq ($(SUBTARGET),p1020)
|
||||
|
||||
@ -1,5 +1,4 @@
|
||||
BOARDNAME:=P1020
|
||||
FEATURES += ramdisk
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for Freescale P1020 based boards.
|
||||
|
||||
@ -0,0 +1,29 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -173,6 +173,16 @@ config XES_MPC85xx
|
||||
Manufacturer: Extreme Engineering Solutions, Inc.
|
||||
URL: <http://www.xes-inc.com/>
|
||||
|
||||
+config RED_15W_REV1
|
||||
+ bool "Sophos RED 15w Rev.1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the SOPHOS RED 15w Rev.1 board.
|
||||
+
|
||||
+ This board is a wireless VPN router with a Freescale P1010 SoC.
|
||||
+
|
||||
config STX_GP3
|
||||
bool "Silicon Turnkey Express GP3"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
@ -0,0 +1,29 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -173,6 +173,16 @@ config XES_MPC85xx
|
||||
Manufacturer: Extreme Engineering Solutions, Inc.
|
||||
URL: <http://www.xes-inc.com/>
|
||||
|
||||
+config RED_15W_REV1
|
||||
+ bool "Sophos RED 15w Rev.1"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Sophos RED 15w Rev.1 board.
|
||||
+
|
||||
+ This board is a wireless VPN router with a Freescale P1010 SoC.
|
||||
+
|
||||
config STX_GP3
|
||||
bool "Silicon Turnkey Express GP3"
|
||||
help
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
|
||||
Loading…
Reference in New Issue
Block a user