Leon M. George f038f1cd09 ramips: add support for cudy WR2100 ... Specifications SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac MT7603E / MT7615E Ethernet: 5x Gbit ports Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Signed-off-by: Leon M. George <leon@georgemail.eu> [remove non-required switch-port node - remove trgmii phy-mode] Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:08:09 +00:00
..
base-files/etc	ramips: remove model name from LED labels	2021-09-01 08:07:03 +00:00
dts	ramips: add support for cudy WR2100	2021-09-01 08:08:09 +00:00
files/drivers	ramips: mt7530 swconfig: fix race condition in register access	2021-09-01 08:07:59 +00:00
image	ramips: add support for cudy WR2100	2021-09-01 08:08:09 +00:00
mt76x8	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
mt7620	ramips: fix mac addresses of Youku YK1	2021-09-01 08:08:05 +00:00
mt7621	ramips: add support for cudy WR2100	2021-09-01 08:08:09 +00:00
patches-5.4	kernel: bump 5.4 to 5.4.119	2021-09-01 08:08:07 +00:00
patches-5.10	kernel: bump 5.10 to 5.10.37	2021-09-01 08:08:05 +00:00
rt288x	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
rt305x	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
rt3883	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
Makefile	ramips: 5.10: port and refresh patches, ralink drv	2021-09-01 08:07:46 +00:00
modules.mk	ramips: rename mtk-hsdma to hsdma-mt7621	2021-09-01 08:07:45 +00:00