Leon M. George f038f1cd09 ramips: add support for cudy WR2100 ... Specifications SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac MT7603E / MT7615E Ethernet: 5x Gbit ports Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Signed-off-by: Leon M. George <leon@georgemail.eu> [remove non-required switch-port node - remove trgmii phy-mode] Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:08:09 +00:00
..
apm821xx	apm821xx: MR24: Change default config of WLAN LED	2021-09-01 08:08:07 +00:00
arc770	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
archs38	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
armvirt	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
at91	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
ath25	kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4	2021-09-01 08:08:02 +00:00
ath79	kernel: bump 5.4 to 5.4.118	2021-09-01 08:08:07 +00:00
bcm27xx	kernel: bump 5.4 to 5.4.121	2021-09-01 08:08:07 +00:00
bcm47xx	bcm47xx: make WGT634U NVRAM patch apply again	2021-09-01 08:07:47 +00:00
bcm53xx	kernel: bump 5.4 to 5.4.118	2021-09-01 08:08:07 +00:00
bcm63xx	kernel: bump 5.4 to 5.4.119	2021-09-01 08:08:07 +00:00
bcm4908	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
bmips	bmips: remove duplicated brcmnand patch	2021-09-01 08:08:06 +00:00
gemini	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
generic	kernel: fix a perf build error	2021-09-01 08:08:08 +00:00
imx6	imx6: image: drop BOOT_SCRIPT and fix DEVICE_NAME	2021-09-01 08:08:09 +00:00
ipq40xx	ipq40xx: fix hard_config partition size on MikroTik hAP-ac2	2021-09-01 08:08:04 +00:00
ipq806x	ipq806x: fix warning about tsens debugfs already registered	2021-09-01 08:08:07 +00:00
ipq807x	treewide: remove redundant ubifs kconfig symbols	2021-09-01 08:08:01 +00:00
kirkwood	kernel: fix parsing fixed subpartitions	2021-09-01 08:08:03 +00:00
lantiq	kernel: bump 5.4 to 5.4.119	2021-09-01 08:08:07 +00:00
layerscape	kernel: bump 5.4 to 5.4.120	2021-09-01 08:08:07 +00:00
malta	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
mediatek	mediatek: update mtd parser patches	2021-09-01 08:08:08 +00:00
mpc85xx	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
mvebu	mvebu: 5.10 fix DVFS caused random boot crashes	2021-09-01 08:08:08 +00:00
mxs	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
octeon	octeon: use shared function for platform_copy_config()	2021-09-01 08:08:06 +00:00
octeontx	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
omap	treewide: remove redundant ubifs kconfig symbols	2021-09-01 08:08:01 +00:00
oxnas	treewide: remove redundant ubifs kconfig symbols	2021-09-01 08:08:01 +00:00
pistachio	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
ramips	ramips: add support for cudy WR2100	2021-09-01 08:08:09 +00:00
realtek	realtek: Fix VLAN issues introduced by multicast patches	2021-09-01 08:08:05 +00:00
rockchip	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
sunxi	kernel: bump 5.4 to 5.4.112	2021-09-01 08:08:00 +00:00
tegra	kernel: Move CONFIG_USERIO to generic config	2021-09-01 08:07:53 +00:00
uml	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
x86	treewide: switch the timer frequency to 100 Hz	2021-09-01 08:08:01 +00:00
zynq	kernel: Move CONFIG_USERIO to generic config	2021-09-01 08:07:53 +00:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-09-01 08:07:34 +00:00