ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-21 01:41:41 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
openwrt/target/linux/ramips/dts
History
Pawel Dembicki e9a9b7d1ed ramips: add support for D-Link DWR-118-A1 
The DWR-118-A1 Wireless Router is based on the MT7620A SoC.

Specification:

- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 3x 10/100 Mbps Ethernet (3 LAN)
- 2x 10/100/1000 Mbps ICPlus IP1001 Ethernet PHY (1 WAN AND 1 LAN)
- 1x internal, non-detachable antenna
- 2x external, non-detachable antennas
- 1x USB 2.0
- UART (J1) header on PCB (57600 8n1)
- 7x LED (5x GPIO-controlled), 2x button
- JBOOT bootloader

Known issues:
- WIFI 5G LED not working
- flash is very slow

The status led has been assigned to the dwr-118-a1:green:internet led.
At the end of the boot it is switched off and is available for other
operation. Work correctly also during sysupgrade operation.

Installation:
Apply factory image via http web-gui or JBOOT recovery page

How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
  blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-12-03 15:34:56 +01:00
..
3G150B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G300M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G-6200N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
3G-6200NL.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
11ACNAS.dts
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
A5-V11.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AC1200RM.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AI-BR100.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AIR3GII.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0239-3G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL0256N.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
ALL5002.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ALL5003.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AP-MT7621A-V60.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AR670W.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
AR725W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC2-v1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20i.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20v1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC20v4.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ArcherC50.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ArcherC50V3.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ArcherMR200.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ASL26555.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ATP-52B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWAPN2403.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
AWUSFREE1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BC2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BDCOM-WAP2100-SK.dts
ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT
2018-11-29 13:15:44 +01:00
BOCCO.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BR-6475ND.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BR-6478AC-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
BROADWAY.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
C108.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CARAMBOLA.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CF-WR800N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
CS-QR10.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
CY-SWR1100.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
D105.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
D240.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DAP-1350.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DAP-1522-A1.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
DB-WRT01.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
DCH-M225.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DCS-930.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DCS-930L-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-300-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-300-B7.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-320-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-600-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-610-A1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-615-D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-615-H1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-620-A1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-620-D1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-645.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-810L.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DIR-860L-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DUZUN-DM06.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
DWR-116-A1.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-118-A1.dts
ramips: add support for D-Link DWR-118-A1
2018-12-03 15:34:56 +01:00
DWR-118-A2.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-512-B.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
DWR-921-C1.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
E1700.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
elecom_wrc-gst.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ESR-9753.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EW1200.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EX2700.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
EX3700.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
F5D8235_V1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
F5D8235_V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
F7C027.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FIREWRT.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FONERA20N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
FREESTATION5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GB-PC1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GB-PC2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT300A.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT300N-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
GL-MT750.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5X61.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5661.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
HC5661A.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5761.dts
ramips: mt7620: add missing pci wifi nodes to dts files
2018-12-03 15:34:56 +01:00
HC5861.dts
ramips: mt7620: add missing pci wifi nodes to dts files
2018-12-03 15:34:56 +01:00
HC5861B.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HC5962.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
HG255D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HLKRM04.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HPM.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HT-TM02.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
HW550-3G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
IP2202.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N805R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N825R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
JHR-N926R.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
K2G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
K2P.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ki_rb.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn_rc.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn_rf.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kn.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
kng_rc.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
LINKIT7688.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
LR-25G001.dts
ramips: specify "firmware" partition format in JBOOT devices
2018-11-30 00:22:04 +01:00
M2M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
M4.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
MAC1200RV2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MicroWRT.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
MINIEMBPLUG.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MINIEMBWIFI.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MIR3G.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MIWIFI-NANO.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MLW221.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MLWG2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MOFI3500-3GN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MPRA1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MPRA2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MR-102N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
mt7620a.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
mt7620n.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
mt7621.dtsi
ramips: fix some clocks in mt7621.dtsi
2018-11-26 12:13:52 +01:00
mt7628an.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
MT7620a_MT7530.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a_V22SG.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7620a.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MT7621.dts
ramips: move partitions into partition table node
2018-08-04 08:39:35 +02:00
MT7628.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-750DHP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-DP150N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-EX300NP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-EX750NP.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-W300NH2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
MZK-WDPR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NA930.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NBG-419N2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NBG-419N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NCS601W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Newifi-D1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Newifi-D2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
NIXCORE.dtsi
ramips: fix whitespace and comment issues in dts
2018-08-04 08:39:35 +02:00
NW718.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
OMEGA2.dts
ramips: fix Omega2 compatible string
2017-12-29 22:32:34 +01:00
OMEGA2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
OMEGA2P.dts
ramips: fix Omega2 compatible string
2017-12-29 22:32:34 +01:00
OY-0001.dts
ramips: mt7620: disable PCIe if nothing is attached
2018-12-03 15:34:56 +01:00
PBR-D1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PBR-M1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1208.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1218.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PSG1218A.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
PSG1218B.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
PSR-680W.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PWH2004.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
PX-4885.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
R6120.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
R6220.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
RB750Gr3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RBM11G.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
RBM33G.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
RE350.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RE6500.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RP-N53.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
rt2880.dtsi
ramips: rt2880: fix pci cells definition
2018-11-26 15:54:22 +01:00
rt3050.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
rt3352.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
rt3883.dtsi
ramips: revert fix rt3883 pci pinmux
2018-11-26 15:54:22 +01:00
rt5350.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
RT5350F-OLINUXINO-EVB.dts
ramips: introduce RT5350F-OLINUXINO.dtsi
2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts
ramips: introduce RT5350F-OLINUXINO.dtsi
2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-AC51U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-G32-B1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N10-PLUS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N12-PLUS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N13U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N14U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N15.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RT-N56U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
RUT5XX.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SAP-G3200U3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SK-WB8.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
SKW92A.dts
ramips: improve Skylab SKW92A support
2018-11-26 15:54:22 +01:00
SL-R7205.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-638APB-V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-691GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-692GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TEW-714TRU.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Timecloud.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TINY-AC.dts
ramips: mt7620: add missing pci wifi nodes to dts files
2018-12-03 15:34:56 +01:00
TL-MR3020V3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TL-MR3420V5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
TL-WR841NV13.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U25AWF-H1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U35WF.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7621-06-256M-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7621-06-512M-64M.dts
ramips: add support for UniElec U7621-06-512M-64M variant
2018-11-28 01:11:38 +01:00
U7621-06.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
U7628-01.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi
ramips: move partitions into partition table node
2018-08-04 08:39:35 +02:00
UBNT-ERX-SFP.dts
ramips: add missing soc compatibles to dts
2018-01-09 22:05:46 +01:00
UBNT-ERX.dts
ramips: add support for Ubiquiti EdgeRouter X-SFP
2017-06-07 06:33:33 +02:00
UR-326N4G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
UR-336UN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
V11STFE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
V22RW-2X2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VAR11N-300.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE2.dtsi
ramips: backport MT7628 pinmux fixes
2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
VOCORE.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
VR500.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W06.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W150M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W306R_V20.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W502U.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
W2914NSV2.dts
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WCR150GN.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WCR-1166DS.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WD03.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WE1026-5G-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi
ramips: set usb led trigger via devicetree
2018-10-07 11:34:18 +02:00
WF-2881.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WHR-300HP2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-600D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-1166D.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WHR-G300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO-32M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIDORA-NEO.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WITI-256M.dts
ramips: add support for mqmaker witi 512mb version
2018-05-07 18:54:23 +02:00
WITI-512M.dts
ramips: add support for mqmaker witi 512mb version
2018-05-07 18:54:23 +02:00
WITI.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIZARD8800.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WIZFI630A.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-330N3G.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-330N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-341V3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-351.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WL-WN570HA1.dts
ramips: add support for Wavlink WL-WN570HA1
2018-11-28 00:50:35 +01:00
WL-WN575A3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WLI-TX4-AG300N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WLR-6000.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WMDR-143N.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WMR-300.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN3000RPV3.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN-AX1167GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WN-GX300GR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WNCE2001.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WNDR3700V5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WR1200JS.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WR1201.dts
ramips: add support for MTC Wireless Router WR1201
2018-11-30 00:20:28 +01:00
WR6202.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRC-1167GHBK2-S.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRC-1900GST.dts
ramips: add support for ELECOM WRC-1900GST
2018-08-23 22:42:09 +02:00
WRC-2533GST.dts
ramips: add support for ELECOM WRC-1900GST
2018-08-23 22:42:09 +02:00
WRH-300CR.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRTNODE2.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WRTNODE2P.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WRTNODE2R.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WRTNODE.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WSR-600.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WSR-1166.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WT1520-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT1520-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT1520.dtsi
ramips: fix dtc warnings
2018-08-04 08:39:35 +02:00
WT3020-4M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT3020-8M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
WT3020.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
X5.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
X8.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
XDXRN502J.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Y1.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
Y1.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
Y1S.dts
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-APE522II.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-CPE102.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WA05.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826-16M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE826.dtsi
ramips: add support for indicating the boot state using multiple leds
2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE1326.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE2026.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WE3526.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WG2626.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WG3526-16M.dts
ramips: mt7621: add compatible strings
2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts
ramips: mt7621: add compatible strings
2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZBT-WR8305RT.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZL5900V2.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00
ZTE-Q7.dts
ramips: specify "firmware" partition format
2018-11-29 13:15:44 +01:00