mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
b5c93edd74
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. Each PHY inside of QCA807x series has 2 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by user space, so lets enable registering each PHY as GPIO controller and add driver for it. This also adds the ability to specify DT properties so that 1000 Base-T LED will also be lit up for 100 and 10 Base connections. This is usually done by U-boot, but boards running mainline U-boot are not configuring this yet. These PHY-s are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
62 lines
2.3 KiB
Diff
62 lines
2.3 KiB
Diff
From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robert.marko@sartura.hr>
|
|
Date: Thu, 1 Oct 2020 15:05:35 +0200
|
|
Subject: [PATCH] dt-bindings: net: add QCA807x PHY
|
|
|
|
Add DT bindings for Qualcomm QCA807x PHY series.
|
|
|
|
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
|
|
---
|
|
include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++
|
|
1 file changed, 45 insertions(+)
|
|
create mode 100644 include/dt-bindings/net/qcom-qca807x.h
|
|
|
|
--- /dev/null
|
|
+++ b/include/dt-bindings/net/qcom-qca807x.h
|
|
@@ -0,0 +1,45 @@
|
|
+/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
+/*
|
|
+ * Device Tree constants for the Qualcomm QCA807X PHYs
|
|
+ */
|
|
+
|
|
+#ifndef _DT_BINDINGS_QCOM_QCA807X_H
|
|
+#define _DT_BINDINGS_QCOM_QCA807X_H
|
|
+
|
|
+#define PSGMII_QSGMII_TX_DRIVER_140MV 0
|
|
+#define PSGMII_QSGMII_TX_DRIVER_160MV 1
|
|
+#define PSGMII_QSGMII_TX_DRIVER_180MV 2
|
|
+#define PSGMII_QSGMII_TX_DRIVER_200MV 3
|
|
+#define PSGMII_QSGMII_TX_DRIVER_220MV 4
|
|
+#define PSGMII_QSGMII_TX_DRIVER_240MV 5
|
|
+#define PSGMII_QSGMII_TX_DRIVER_260MV 6
|
|
+#define PSGMII_QSGMII_TX_DRIVER_280MV 7
|
|
+#define PSGMII_QSGMII_TX_DRIVER_300MV 8
|
|
+#define PSGMII_QSGMII_TX_DRIVER_320MV 9
|
|
+#define PSGMII_QSGMII_TX_DRIVER_400MV 10
|
|
+#define PSGMII_QSGMII_TX_DRIVER_500MV 11
|
|
+/* Default value */
|
|
+#define PSGMII_QSGMII_TX_DRIVER_600MV 12
|
|
+
|
|
+/* Full amplitude, full bias current */
|
|
+#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0
|
|
+/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */
|
|
+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1
|
|
+/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */
|
|
+#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2
|
|
+/* Both amplitude and bias current follow DSP */
|
|
+#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3
|
|
+/* Full amplitude, half bias current */
|
|
+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4
|
|
+/* Amplitude follow DSP setting; 1/4 bias current when cable<10m,
|
|
+ * otherwise half bias current
|
|
+ */
|
|
+#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5
|
|
+/* Full amplitude; same bias current setting with “010” and “011”,
|
|
+ * but half more bias is reduced when cable <10m
|
|
+ */
|
|
+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6
|
|
+/* Amplitude follow DSP; same bias current setting with “110”, default value */
|
|
+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7
|
|
+
|
|
+#endif
|