openwrt/package/boot/uboot-envtools/files
Alexey Bartenev e573b6b557 ramips: add support for D-Link DIR-806A B1 router
General specification:
SoC Type: MediaTek MT7620A (580MHz)
ROM: 8 MB SPI-NOR (MX25L6406E)
RAM: 64 MB DDR (W9751G6KB-25)
Switch: MediaTek MT7530
Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4)
Wireless: 2.4 GHz (MediaTek RT5390): b/g/n
Wireless: 5 GHz (MediaTek MT7610EN): ac/n
Buttons: 2 button (POWER, WPS/RESET)
Bootloader: U-Boot 1.1.3
Power: 12 VDC, 0.5 A

MACs:
| LAN	| [Factory + 0x04] - 2		|
| WLAN 2.4g	| [Factory + 0x04] - 1		|
| WLAN 5g	| [Factory + 0x8004] - 3	|
| WAN	| [Factory + 0x04] - 2		|

OEM easy installation:

1. Use a PC to browse to http://192.168.0.1.
2. Go to the System section and open the Firmware Update section.
3. Under the Local Update at the right, click on the CHOOSE FILE...
4. When a modal window appears, choose the firmware file and click on
 the Open.
5. Next click on the UPDATE FIRMWARE button and upload the firmware image.
Wait for the router to flash and reboot.

OEM installation using the TFTP method (need level converter):

1. Download the latest firmware image.
2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware
 image to the root directory of the server.
3. Power off the router and use a twisted pair cable to connect the PC
 to any of the router's LAN ports.
4. Configure the network adapter of the PC to use IP address 192.168.0.180
 and subnet mask 255.255.255.0.
5. Connect serial port (57600 8N1) and turn on the router.
6. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load
 system code then write to Flash via TFTP.").
7. Press Y key when show "Warning!! Erase Linux in Flash then burn new
 one. Are you sure? (Y/N)"
Input device IP (192.168.0.1) ==:192.168.0.1
Input server IP (192.168.0.180) ==:192.168.0.180
Input Linux Kernel filename () ==:firmware_name
The router should download the firmware via TFTP and complete flashing in
 a few minutes.
After flashing is complete, use the PC to browse to http://192.168.1.1 or
 ssh to proceed with the configuration.

Signed-off-by: Alexey Bartenev <41exey@proton.me>
(cherry picked from commit ce998cb6e1)
2024-07-09 08:54:41 +02:00
..
apm821xx apm821xx: MBL: make mtd chip work 2022-06-19 12:31:02 +02:00
ath79 ath79: add support for Huawei AP5030DN 2024-04-03 02:56:56 +02:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa7 uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D 2022-07-11 14:28:03 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx uboot-envtools: ipq40xx: fix WHW03V2 mtd partition 2023-01-18 00:07:30 +01:00
ipq806x ipq806x: add support for Nokia Airscale AC400i 2023-03-19 18:02:34 +01:00
ipq807x ipq807x: add initial support for prpl Foundation Haze board 2023-06-12 22:10:29 +02:00
kirkwood kirkwood: add ix4-200d support to uboot-envtools 2024-03-23 14:58:33 +01:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape layerscape: remove Traverse LS1043 boards 2023-07-26 13:36:58 +02:00
mediatek_filogic filogic: Add support for D-Link AQUILA PRO AI M30 2024-07-08 23:06:38 +02:00
mediatek_mt7622 mediatek: Add support for D-Link EAGLE PRO AI R32 2024-07-06 18:32:57 +02:00
mediatek_mt7623 uboot-envtools: add configuration for UniElec U7623 board 2022-01-23 20:20:42 +00:00
mediatek_mt7629 mediatek: add support for Netgear EX6250v2 series 2023-07-13 12:05:28 +01:00
mpc85xx mpc85xx: add support for Enterasys WS-AP3715i 2023-04-08 14:41:01 +02:00
mvebu mvebu: add support for Buffalo LinkStation LS220DE 2023-02-26 22:22:48 +01:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-21 20:16:16 +00:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
ramips ramips: add support for D-Link DIR-806A B1 router 2024-07-09 08:54:41 +02:00
realtek uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00