mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
5c57f9bbea
Support the use of MBO in the bss_transition_request ubus method. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: David Bauer <mail@david-bauer.net>
420 lines
13 KiB
Markdown
420 lines
13 KiB
Markdown
# UBUS methods - hostapd
|
|
|
|
## bss_mgmt_enable
|
|
Enable 802.11k/v features.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| neighbor_report | bool | no | enable 802.11k neighbor reports |
|
|
| beacon_report | bool | no | enable 802.11k beacon reports |
|
|
| link_measurements | bool | no | enable 802.11k link measurements |
|
|
| bss_transition | bool | no | enable 802.11v BSS transition support |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb bss_mgmt_enable '{ "neighbor_report": true, "beacon_report": true, "link_measurements": true, "bss_transition": true
|
|
}'`
|
|
|
|
|
|
## bss_transition_request
|
|
Initiate an 802.11v transition request.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| addr | string | yes | client MAC address |
|
|
| disassociation_imminent | bool | no | set Disassociation Imminent bit |
|
|
| disassociation_timer | int32 | no | disassociate client if it doesn't roam after this time |
|
|
| validity_period | int32 | no | validity of the BSS Transition Candiate List |
|
|
| neighbors | array | no | BSS Transition Candidate List |
|
|
| abridged | bool | no | prefer APs in the BSS Transition Candidate List |
|
|
| dialog_token | int32 | no | identifier for the request/report transaction |
|
|
| mbo_reason | int32 | no | MBO Transition Reason Code Attribute |
|
|
| cell_pref | int32 | no | MBO Cellular Data Connection Preference Attribute |
|
|
| reassoc_delay | int32 | no | MBO Re-association retry delay |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb bss_transition_request '{ "addr": "68:2F:67:8B:98:ED", "disassociation_imminent": false, "disassociation_timer": 0, "validity_period": 30, "neighbors": ["b6a7b9cbeebabf5900008064090603026a00"], "abridged": 1 }'`
|
|
|
|
|
|
## config_add
|
|
Dynamically load a BSS configuration from a file. This is used by netifd's mac80211 support script to configure BSSes on multiple PHYs in a single hostapd instance.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| iface | string | yes | WiFi interface name |
|
|
| config | string | yes | path to hostapd config file |
|
|
|
|
|
|
## config_remove
|
|
Dynamically remove a BSS configuration.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| iface | string | yes | WiFi interface name |
|
|
|
|
|
|
## del_client
|
|
Kick a client off the network.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| addr | string | yes | client MAC address |
|
|
| reason | int32 | no | 802.11 reason code |
|
|
| deauth | bool | no | deauthenticates client instead of disassociating |
|
|
| ban_time | int32 | no | ban client for N milliseconds |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb del_client '{ "addr": "68:2f:67:8b:98:ed", "reason": 5, "deauth": true, "ban_time": 10000 }'`
|
|
|
|
|
|
## get_clients
|
|
Show associated clients.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb get_clients`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"freq": 5260,
|
|
"clients": {
|
|
"68:2f:67:8b:98:ed": {
|
|
"auth": true,
|
|
"assoc": true,
|
|
"authorized": true,
|
|
"preauth": false,
|
|
"wds": false,
|
|
"wmm": true,
|
|
"ht": true,
|
|
"vht": true,
|
|
"he": false,
|
|
"wps": false,
|
|
"mfp": true,
|
|
"rrm": [
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0
|
|
],
|
|
"extended_capabilities": [
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
64
|
|
],
|
|
"aid": 3,
|
|
"signature": "wifi4|probe:0,1,45,127,107,191,221(0017f2,10),221(001018,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,extcap:0000008000000040|assoc:0,1,33,36,48,45,127,191,221(0017f2,10),221(001018,2),221(0050f2,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,txpow:14f9,extcap:0000000000000040",
|
|
"bytes": {
|
|
"rx": 1933667,
|
|
"tx": 746805
|
|
},
|
|
"airtime": {
|
|
"rx": 208863,
|
|
"tx": 9037883
|
|
},
|
|
"packets": {
|
|
"rx": 3587,
|
|
"tx": 2185
|
|
},
|
|
"rate": {
|
|
"rx": 866700,
|
|
"tx": 866700
|
|
},
|
|
"signal": -50,
|
|
"capabilities": {
|
|
"vht": {
|
|
"su_beamformee": true,
|
|
"mu_beamformee": false,
|
|
"mcs_map": {
|
|
"rx": {
|
|
"1ss": 9,
|
|
"2ss": 9,
|
|
"3ss": 9,
|
|
"4ss": -1,
|
|
"5ss": -1,
|
|
"6ss": -1,
|
|
"7ss": -1,
|
|
"8ss": -1
|
|
},
|
|
"tx": {
|
|
"1ss": 9,
|
|
"2ss": 9,
|
|
"3ss": 9,
|
|
"4ss": -1,
|
|
"5ss": -1,
|
|
"6ss": -1,
|
|
"7ss": -1,
|
|
"8ss": -1
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
```
|
|
|
|
|
|
## get_features
|
|
Show HT/VHT support.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb get_features`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"ht_supported": true,
|
|
"vht_supported": true
|
|
}
|
|
```
|
|
|
|
|
|
## get_status
|
|
Get BSS status.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb get_status`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"status": "ENABLED",
|
|
"bssid": "b6:a7:b9:cb:ee:bc",
|
|
"ssid": "fb",
|
|
"freq": 5260,
|
|
"channel": 52,
|
|
"op_class": 128,
|
|
"beacon_interval": 100,
|
|
"phy": "wl5-lan",
|
|
"rrm": {
|
|
"neighbor_report_tx": 0
|
|
},
|
|
"wnm": {
|
|
"bss_transition_query_rx": 0,
|
|
"bss_transition_request_tx": 0,
|
|
"bss_transition_response_rx": 0
|
|
},
|
|
"airtime": {
|
|
"time": 259561738,
|
|
"time_busy": 2844249,
|
|
"utilization": 0
|
|
},
|
|
"dfs": {
|
|
"cac_seconds": 60,
|
|
"cac_active": false,
|
|
"cac_seconds_left": 0
|
|
}
|
|
}
|
|
```
|
|
|
|
|
|
## link_measurement_req
|
|
Initiate an 802.11k Link Measurement Request.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| addr | string | yes | client MAC address |
|
|
| tx-power-used | int32 | no | transmit power used to transmit the Link Measurement Request frame |
|
|
| tx-power-max | int32 | no | upper limit of transmit power to be used by the client |
|
|
|
|
|
|
## list_bans
|
|
List banned clients.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb list_bans`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"clients": [
|
|
"68:2f:67:8b:98:ed"
|
|
]
|
|
}
|
|
```
|
|
|
|
|
|
## notify_response
|
|
When enabled, hostapd will send a ubus notification and wait for a response before responding to various requests. This is used by e.g. usteer to make it possible to ignore probe requests.
|
|
|
|
:warning: enabling this will cause hostapd to stop responding to probe requests unless a ubus subscriber responds to the ubus notifications.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| notify_response | int32 | yes | disable (0) or enable (!0) |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb notify_response '{ "notify_response": 1 }'`
|
|
|
|
## reload
|
|
Reload BSS configuration.
|
|
|
|
:warning: this can cause problems for certain configurations:
|
|
|
|
```
|
|
Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
|
|
Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
|
|
Mon May 16 16:09:08 2022 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting
|
|
```
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb reload`
|
|
|
|
|
|
## rrm_beacon_req
|
|
Send a Beacon Measurement Request to a client.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| addr | string | yes | client MAC address |
|
|
| op_class | int32 | yes | the Regulatory Class for which this Measurement Request applies |
|
|
| channel | int32 | yes | channel to measure |
|
|
| duration | int32 | yes | compile Beacon Measurement Report after N TU |
|
|
| mode | int32 | yes | mode to be used for measurement (0: passive, 1: active, 2: beacon table) |
|
|
| bssid | string | no | filter BSSes in Beacon Measurement Report by BSSID |
|
|
| ssid | string | no | filter BSSes in Beacon Measurement Report by SSID|
|
|
|
|
|
|
## rrm_nr_get_own
|
|
Show Neighbor Report Element for this BSS.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb rrm_nr_get_own`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"value": [
|
|
"b6:a7:b9:cb:ee:bc",
|
|
"fb",
|
|
"b6a7b9cbeebcaf5900008095090603029b00"
|
|
]
|
|
}
|
|
```
|
|
|
|
|
|
## rrm_nr_list
|
|
Show Neighbor Report Elements for other BSSes in this ESS.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb rrm_nr_list`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"list": [
|
|
[
|
|
"b6:a7:b9:cb:ee:ba",
|
|
"fb",
|
|
"b6a7b9cbeebabf5900008064090603026a00"
|
|
]
|
|
]
|
|
}
|
|
```
|
|
|
|
## rrm_nr_set
|
|
Set the Neighbor Report Elements. An element for the node on which this command is executed will always be added.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| list | array | yes | array of Neighbor Report Elements in the format of the rrm_nr_list output |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb rrm_nr_set '{ "list": [ [ "b6:a7:b9:cb:ee:ba", "fb", "b6a7b9cbeebabf5900008064090603026a00" ] ] }'`
|
|
|
|
|
|
## set_vendor_elements
|
|
Configure Vendor-specific Information Elements for BSS.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| vendor_elements | string | yes | Vendor-specific Information Elements as hex string |
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb set_vendor_elements '{ "vendor_elements": "dd054857dd6662" }'`
|
|
|
|
|
|
## switch_chan
|
|
Initiate a channel switch.
|
|
|
|
:warning: trying to switch to the channel that is currently in use will fail: `Command failed: Operation not supported`
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| freq | int32 | yes | frequency in MHz to switch to |
|
|
| bcn_count | int32 | no | count in Beacon frames (TBTT) to perform the switch |
|
|
| center_freq1 | int32 | no | segment 0 center frequency in MHz (valid for HT and VHT) |
|
|
| center_freq2 | int32 | no | segment 1 center frequency in MHz (valid only for 80 MHz channel width and an 80+80 channel) |
|
|
| bandwidth | int32 | no | channel width to use |
|
|
| sec_channel_offset| int32 | no | secondary channel offset for HT40 (0 = disabled, 1 = HT40+, -1 = HT40-) |
|
|
| ht | bool | no | enable 802.11n |
|
|
| vht | bool | no | enable 802.11ac |
|
|
| he | bool | no | enable 802.11ax |
|
|
| block_tx | bool | no | block transmission during CSA period |
|
|
| csa_force | bool | no | restart the interface in case the CSA fails |
|
|
|
|
## example
|
|
`ubus call hostapd.wl5-fb switch_chan '{ "freq": 5180, "bcn_count": 10, "center_freq1": 5210, "bandwidth": 80, "he": 1, "block_tx": 1, "csa_force": 0 }'`
|
|
|
|
|
|
## update_airtime
|
|
Set dynamic airtime weight for client.
|
|
|
|
### arguments
|
|
| Name | Type | Required | Description |
|
|
|---|---|---|---|
|
|
| sta | string | yes | client MAC address |
|
|
| weight | int32 | yes | airtime weight |
|
|
|
|
|
|
## update_beacon
|
|
Force beacon frame content to be updated and to start beaconing on an interface that uses start_disabled=1.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb update_beacon`
|
|
|
|
|
|
## wps_status
|
|
Get WPS status for BSS.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb wps_status`
|
|
|
|
### output
|
|
```json
|
|
{
|
|
"pbc_status": "Disabled",
|
|
"last_wps_result": "None"
|
|
}
|
|
```
|
|
|
|
|
|
## wps_cancel
|
|
Cancel WPS Push Button Configuration.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb wps_cancel`
|
|
|
|
|
|
## wps_start
|
|
Start WPS Push Button Configuration.
|
|
|
|
### example
|
|
`ubus call hostapd.wl5-fb wps_start`
|