openwrt/target/linux/ath79
Joan Moreau df222e57be ath79: add support for KuWfi CPE830(D) / YunCore CPE830(D)
Short specification:
* 650/600/216 MHz (CPU/DDR/AHB)
* 2x 10/100 Mbps Ethernet, passive PoE support
* 64 MB of RAM (DDR2)
* 16 MB of FLASH
* 2T2R 2.4 GHz with external PA, up to 30 dBm (1000mW)
* 2x internal 14 dBi antennas
* 8x LED, 1x button
* No UART on PCB on some versions
* Display panel with 2x buttons (F/N) not supported (and not relevant in OpenWrt)-

Flash instructions
* Connect PC with 192.168.0.141 to WAN port
* Install a TFTP server on your PC ('atftp' is doing the job for instance)
* Copy your firmware in the TFTP folder as upgrade.bin
* Power up device pushing the 'reset' button
* The device shall upload upgrade.bin, install it and reboot
* Device shall be booting on 192.168.1.1 as default

Signed-off-by: Joan Moreau <jom@grosjo.net>
Link: https://github.com/openwrt/openwrt/pull/17279
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-12-26 15:19:25 +01:00
..
base-files/etc/hotplug.d/ieee80211 ath79: migrate Archer C5 5GHz radio device paths 2022-03-31 18:07:29 +02:00
dts ath79: add support for KuWfi CPE830(D) / YunCore CPE830(D) 2024-12-26 15:19:25 +01:00
files treewide: remove THIS_MODULE assignment 2024-11-10 02:16:31 +01:00
generic ath79: add support for KuWfi CPE830(D) / YunCore CPE830(D) 2024-12-26 15:19:25 +01:00
image ath79: add support for KuWfi CPE830(D) / YunCore CPE830(D) 2024-12-26 15:19:25 +01:00
mikrotik generic: platform/mikrotik: add wlan lz77 decompress 2024-10-08 10:45:58 +02:00
nand ath79: nbg6x16: use nvmem 2024-12-22 23:36:41 +01:00
patches-6.6 kernel: bump 6.6 to 6.6.66 2024-12-19 00:38:34 +01:00
tiny ath79: pqi-air-pen: adjust mac addresses 2024-12-13 15:29:04 +01:00
config-6.6 kernel: filter out compiler opts from config 2024-11-17 14:55:16 +01:00
Makefile ath79: switch default kernel to 6.6 2024-06-14 17:38:09 +02:00
modules.mk