mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
2ee98e8f6e
This should align opp table with what it was before converting to OPP v2. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
72 lines
3.1 KiB
Diff
72 lines
3.1 KiB
Diff
From: Christian Lamparter <chunkeey@gmail.com>
|
|
Date: Thu, 12 Apr 2018 21:01:38 +0200
|
|
Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues
|
|
|
|
Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
|
|
Setting up any gpio-hog in the device-tree for his device would
|
|
"kill the bootup completely":
|
|
|
|
| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
|
|
| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
|
|
| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
|
|
| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
|
|
| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
|
|
| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
|
|
| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
|
|
|
|
This was also verified on a RT-AC58U (IPQ4018) which would
|
|
no longer boot, if a gpio-hog was specified. (Tried forcing
|
|
the USB LED PIN (GPIO0) to high.).
|
|
|
|
The problem is that Pinctrl+GPIO registration is currently
|
|
peformed in the following order in pinctrl-msm.c:
|
|
1. pinctrl_register()
|
|
2. gpiochip_add()
|
|
3. gpiochip_add_pin_range()
|
|
|
|
The actual error code -517 == -EPROBE_DEFER is coming from
|
|
pinctrl_get_device_gpio_range(), which is called through:
|
|
gpiochip_add
|
|
of_gpiochip_add
|
|
of_gpiochip_scan_gpios
|
|
gpiod_hog
|
|
gpiochip_request_own_desc
|
|
__gpiod_request
|
|
chip->request
|
|
gpiochip_generic_request
|
|
pinctrl_gpio_request
|
|
pinctrl_get_device_gpio_range
|
|
|
|
pinctrl_get_device_gpio_range() is unable to find any valid
|
|
pin ranges, since nothing has been added to the pinctrldev_list yet.
|
|
so the range can't be found, and the operation fails with -EPROBE_DEFER.
|
|
|
|
This patch fixes the issue by adding the "gpio-ranges" property to
|
|
the pinctrl device node of all upstream Qcom SoC. The pin ranges are
|
|
then added by the gpio core.
|
|
|
|
In order to remain compatible with older, existing DTs (and ACPI)
|
|
a check for the "gpio-ranges" property has been added to
|
|
msm_gpio_init(). This prevents the driver of adding the same entry
|
|
to the pinctrldev_list twice.
|
|
|
|
Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
|
|
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
|
|
Origin: other, https://patchwork.kernel.org/patch/10339127/
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
|
|
drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++-----
|
|
14 files changed, 32 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
@@ -186,6 +186,7 @@
|
|
compatible = "qcom,ipq4019-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
gpio-controller;
|
|
+ gpio-ranges = <&tlmm 0 0 100>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|