.. |
ar724x.dtsi
|
ath79: add pinmux node to ar724x.dtsi
|
2018-06-01 08:23:02 +02:00 |
ar934x.dtsi
|
ath79: ar934x: use reset for usb-phy-analog
|
2020-02-23 08:27:32 +01:00 |
ar1022_iodata_wn-ag300dgr.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7100.dtsi
|
ath79: fix dtc compiler warnings
|
2018-12-12 12:28:26 +01:00 |
ar7161_aruba_ap-105.dts
|
ath79: add support for Aruba AP-105
|
2019-05-18 16:44:41 +02:00 |
ar7161_buffalo_wzr-hp-ag300h.dts
|
ath79: dts: Unify naming of gpio-keys nodes
|
2019-01-26 21:09:12 +01:00 |
ar7161_dlink_dir-825-b1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7161_jjplus_ja76pf2.dts
|
ath79: dts: fix ja76pf2 spi frequency
|
2019-09-29 11:29:57 +02:00 |
ar7161_netgear_wndr3700.dts
|
ath79: WNDR3700 v1/v2: make u-boot env partition writable
|
2020-02-07 14:08:19 +01:00 |
ar7161_netgear_wndr3700.dtsi
|
ath79: convert Netgear WNDR3700 series to gpio-keys
|
2019-05-18 17:59:49 +02:00 |
ar7161_netgear_wndr3700v2.dts
|
ath79: WNDR3700 v1/v2: make u-boot env partition writable
|
2020-02-07 14:08:19 +01:00 |
ar7161_netgear_wndr3800.dts
|
ath79: specify "firmware" partition format for Netgear WNDR3800
|
2018-11-24 08:46:59 +01:00 |
ar7161_ubnt_routerstation-pro.dts
|
ath79: add syscon compatible property to ar7100 ethernet nodes
|
2018-09-06 21:35:53 +02:00 |
ar7161_ubnt_routerstation.dts
|
ath79: initial support for Ubiquiti RouterStation and RouterStation Pro
|
2018-08-27 19:31:17 +02:00 |
ar7161_ubnt_routerstation.dtsi
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
ar7240_buffalo_whr-g301n.dts
|
ath79: dts: Unify naming of gpio-keys nodes
|
2019-01-26 21:09:12 +01:00 |
ar7240_netgear_wnr612-v2.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_netgear_wnr612-v2.dtsi
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
ar7240_on_n150r.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr74xn-v1.dtsi
|
ath79: dts: Unify naming of gpio-keys nodes
|
2019-01-26 21:09:12 +01:00 |
ar7240_tplink_tl-wr740n-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr740n-v3.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr741-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr743nd-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr841-v5.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240_tplink_tl-wr941-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7240.dtsi
|
ath79: use ar8216 for builtin switch
|
2019-03-24 01:44:27 +01:00 |
ar7241_tplink_tl-mr3x20.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7241_tplink_tl-mr3220-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7241_tplink_tl-mr3420-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7241_tplink_tl-wr841-v7.dts
|
ath79: rename TP-LINK to TP-Link
|
2019-02-14 16:56:14 +01:00 |
ar7241_tplink_tl-wr842n-v1.dts
|
ath79: add support for TP-Link TL-WR842N/ND v1 router
|
2018-12-15 21:35:45 +01:00 |
ar7241_tplink.dtsi
|
ath79: dts: Unify naming of gpio-keys nodes
|
2019-01-26 21:09:12 +01:00 |
ar7241_ubnt_airrouter.dts
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
ar7241_ubnt_bullet-m.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7241_ubnt_nanostation-loco-m.dts
|
ath79: add support for Ubiquiti Nanostation Loco M (XM)
|
2020-02-21 14:12:30 +01:00 |
ar7241_ubnt_nanostation-m.dts
|
ath79: align naming of Ubiquiti Nanostation M
|
2019-03-18 20:55:24 +01:00 |
ar7241_ubnt_picostation-m.dts
|
ath79: add support for Ubiquiti Picostation M (XM)
|
2020-02-21 14:12:30 +01:00 |
ar7241_ubnt_rocket-m.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar7241_ubnt_unifi.dts
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
ar7241_ubnt_xm_outdoor.dtsi
|
ath79: split ubnt outdoor device leds into separate dtsi
|
2018-12-03 07:58:49 +01:00 |
ar7241_ubnt_xm.dtsi
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
ar7241.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
2019-06-05 10:12:31 +02:00 |
ar7242_avm_fritz300e.dts
|
ath79: dts: Unify naming of gpio-keys nodes
|
2019-01-26 21:09:12 +01:00 |
ar7242_buffalo_bhr-4grv.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar7242_buffalo_wzr-bhr.dtsi
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar7242_buffalo_wzr-hp-g450h.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar7242_tplink_tl-wr2543-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
2019-02-14 16:56:14 +01:00 |
ar7242.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
2019-06-05 10:12:31 +02:00 |
ar9132_tplink_tl-wa901nd-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9132_tplink_tl-wr941-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9132_tplink_tl-wr1043nd-v1.dts
|
ath79: make TP-Link revision naming consistent
|
2019-03-02 13:04:54 +01:00 |
ar9132.dtsi
|
ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x
|
2018-08-28 11:26:53 +02:00 |
ar9330_glinet_gl-ar150.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar9330_pqi_air-pen.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9330.dtsi
|
ath79: ar9330: add missing watchdog node
|
2019-07-17 16:49:54 +02:00 |
ar9331_8dev_carambola2.dts
|
ath79: add support for 8devices Carambola2 development board
|
2019-06-05 10:24:45 +02:00 |
ar9331_embeddedwireless_dorin.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar9331_etactica_eg200.dts
|
ath79: etactica-eg200: fix restore button
|
2019-08-30 23:03:18 +02:00 |
ar9331_pisen_wmm003n.dts
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
ar9331_tplink_tl-mr10u.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
ar9331_tplink_tl-mr3020-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9331_tplink_tl-mr3040-v2.dts
|
ath79: fix pinmux for ar933x devices
|
2019-05-15 13:34:24 +02:00 |
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
ar9331_tplink_tl-wr703n.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
ar9331_tplink_tl-wr710n-v1.dts
|
ath79: add TP-Link TL-WR710N v1
|
2019-03-24 01:44:27 +01:00 |
ar9331_tplink_tl-wr740n-v4.dts
|
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4
|
2019-02-14 16:56:14 +01:00 |
ar9331_tplink_tl-wr741nd-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar9331_tplink_tl-wr741nd-v4.dtsi
|
ath79: fix pinmux for ar933x devices
|
2019-05-15 13:34:24 +02:00 |
ar9331.dtsi
|
ath79: add tl-mr3020-v1 support
|
2018-06-08 12:19:49 +02:00 |
ar9341_pcs_cr3000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9341_tplink_tl-wr841-v8.dts
|
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
|
2020-02-21 14:12:30 +01:00 |
ar9341_tplink_tl-wr842n-v2.dts
|
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
|
2020-02-21 14:12:30 +01:00 |
ar9341.dtsi
|
ath79: ar934x: Update dts for current ag71xx driver
|
2018-07-30 10:43:33 +02:00 |
ar9342_iodata_etg3-r.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
ar9342_ubnt_bullet-m-xw.dts
|
ath79: ubnt-bullet-m-xw: Remove eth1 disabled node
|
2018-12-27 16:02:25 +01:00 |
ar9342_ubnt_lap-120.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar9342_ubnt_nanobeam-ac.dts
|
ath79: Add support for Ubiquiti NanoBeam AC
|
2019-03-22 00:40:29 +01:00 |
ar9342_ubnt_nanostation-ac-loco.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar9342_ubnt_nanostation-ac.dts
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
ar9342_ubnt_nanostation-m-xw.dts
|
ath79: Add support for Ubiquiti Nanostation M (XW)
|
2019-03-05 03:15:52 +01:00 |
ar9342_ubnt_wa.dtsi
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
ar9342_ubnt_xw.dtsi
|
ath79: fix DTS node names for Ubiquiti XW partitions
|
2020-02-07 14:10:02 +01:00 |
ar9344_comfast_cf-e120a-v3.dts
|
ath79: add support for COMFAST CF-E120A v3
|
2019-02-28 11:26:10 +01:00 |
ar9344_dlink_dir-8x5.dtsi
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
ar9344_dlink_dir-825-c1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
ar9344_dlink_dir-835-a1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
ar9344_ocedo_raccoon.dts
|
ath79: fix OCEDO Raccoon 10Mbit PLL value
|
2019-05-05 21:11:01 +02:00 |
ar9344_pcs_cap324.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9344_pcs_cr5000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9344_tplink_tl-wdr3600-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
2019-07-17 22:47:28 +02:00 |
ar9344_tplink_tl-wdr4300-v1-il.dts
|
ath79: add support for TP-Link TL-WDR4300 v1 (IL)
|
2019-12-13 20:01:45 +01:00 |
ar9344_tplink_tl-wdr4300-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
2019-07-17 22:47:28 +02:00 |
ar9344_tplink_tl-wdr4300.dtsi
|
ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300
|
2019-12-21 00:31:00 +01:00 |
ar9344_wd_mynet-n750.dts
|
ath79: add support for WD My Net N750
|
2019-05-27 22:44:08 +02:00 |
ar9344_wd_mynet-wifi-rangeextender.dts
|
ath79: convert WD MyNet Range Extender to gpio-keys
|
2019-05-18 17:59:49 +02:00 |
ar9344_winchannel_wb2000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
ar9344_zbtlink_zbt-wd323.dts
|
ath79: Add support for ZBT-WD323
|
2019-06-05 10:24:36 +02:00 |
ar9344.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
2020-02-11 13:39:26 +01:00 |
ath79.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
2019-06-05 10:12:31 +02:00 |
qca953x_tplink_tl-wr810n.dtsi
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
qca953x.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
2020-02-11 13:39:26 +01:00 |
qca956x.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
2020-02-11 13:39:26 +01:00 |
qca9531_comfast_cf-e5.dts
|
ath79: add support for COMFAST CF-E5/E7
|
2019-03-24 01:44:27 +01:00 |
qca9531_engenius_ews511ap.dts
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
qca9531_glinet_gl-ar300m-lite.dts
|
ath79: Clean up GL-AR300M DTS/DTSI inclusions
|
2019-11-03 14:02:25 +01:00 |
qca9531_glinet_gl-ar300m-nand.dts
|
ath79: Add GL.iNet AR-300M-Lite
|
2019-03-13 16:25:34 +01:00 |
qca9531_glinet_gl-ar300m-nor.dts
|
ath79: Clean up GL-AR300M DTS/DTSI inclusions
|
2019-11-03 14:02:25 +01:00 |
qca9531_glinet_gl-ar300m.dtsi
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
qca9531_glinet_gl-x750.dts
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
qca9531_tplink_archer-d50-v1.dts
|
ath79: add support for TP-Link Archer D50 V1
|
2019-05-18 17:59:49 +02:00 |
qca9531_tplink_tl-wr810n-v1.dts
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
qca9531_yuncore_a770.dts
|
ath79: add support for YunCore A770
|
2019-03-09 16:31:17 +01:00 |
qca9533_comfast_cf-e110n-v2.dts
|
ath79: add support for COMFAST CF-E110N
|
2018-12-31 16:25:11 +01:00 |
qca9533_tplink_cpe210-v2.dts
|
ath79: Add support for TP-Link CPE210 v2
|
2019-04-02 02:10:59 +02:00 |
qca9533_tplink_cpe210-v3.dts
|
ath79: Add support for TP-Link CPE210 v3
|
2019-04-02 02:10:59 +02:00 |
qca9533_tplink_cpe210.dtsi
|
ath79: add support for the TP-LINK CPE220 V3
|
2020-01-08 17:42:37 +01:00 |
qca9533_tplink_cpe220-v3.dts
|
ath79: add support for the TP-LINK CPE220 V3
|
2020-01-08 17:42:37 +01:00 |
qca9533_tplink_cpexxx.dtsi
|
ath79: add support for the TP-LINK CPE220 V3
|
2020-01-08 17:42:37 +01:00 |
qca9533_tplink_tl-wr810n-v2.dts
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
qca9533_tplink_tl-wr841-v9.dts
|
ath79: add support for TP-Link TL-WR841N/ND v10
|
2020-01-08 18:32:52 +01:00 |
qca9533_tplink_tl-wr841-v10.dts
|
ath79: add support for TP-Link TL-WR841N/ND v10
|
2020-01-08 18:32:52 +01:00 |
qca9533_tplink_tl-wr841-v11.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
2020-01-08 18:35:34 +01:00 |
qca9533_tplink_tl-wr841-v11.dtsi
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
2020-01-08 18:35:34 +01:00 |
qca9533_tplink_tl-wr841-v12.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
2020-01-08 18:35:34 +01:00 |
qca9533_tplink_tl-wr841.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9533_tplink_tl-wr842n-v3.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9533_ubnt_acb-isp.dts
|
ath79: add support for Ubiquiti airCube ISP
|
2019-04-08 18:37:04 +02:00 |
qca9557_buffalo_bhr-4grv2.dts
|
ath79: dts: Unify naming of gpio-led nodes
|
2019-01-26 21:09:12 +01:00 |
qca9557_iodata_wn-ac1167dgr.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
2019-02-14 16:56:15 +01:00 |
qca9557_iodata_wn-ac1600dgr2.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
2019-02-14 16:56:15 +01:00 |
qca9557_iodata_wn-ac1600dgr.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
2019-02-14 16:56:15 +01:00 |
qca9557_iodata_wn-ac-dgr.dtsi
|
ath79: add support for I-O DATA WN-AC1600DGR
|
2019-02-14 16:56:15 +01:00 |
qca9557.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
2020-02-11 13:39:26 +01:00 |
qca9558_devolo_dvl1xxx.dtsi
|
ath79: add support for devolo WiFi pro 1200e
|
2018-12-27 14:06:38 +01:00 |
qca9558_devolo_dvl1200e.dts
|
ath79: add support for devolo WiFi pro 1200e
|
2018-12-27 14:06:38 +01:00 |
qca9558_devolo_dvl1200i.dts
|
ath79: add support for devolo WiFi pro 1200i
|
2019-01-05 21:55:22 +01:00 |
qca9558_devolo_dvl1750c.dts
|
ath79: add support for devolo WiFi pro 1750c
|
2018-12-27 14:06:38 +01:00 |
qca9558_devolo_dvl1750e.dts
|
ath79: add support for Devolo WiFi Pro 1750e
|
2019-01-26 21:46:33 +01:00 |
qca9558_devolo_dvl1750i.dts
|
ath79: add support for devolo WiFi pro 1750i
|
2019-01-05 21:55:22 +01:00 |
qca9558_devolo_dvl1750x.dts
|
ath79: add support for devolo WiFi pro 1750x
|
2019-07-21 13:09:45 +02:00 |
qca9558_engenius_ecb1750.dts
|
ath79: ecb1750: additional dts fixes
|
2019-05-27 22:44:08 +02:00 |
qca9558_engenius_epg5000.dts
|
ath79: fix leds description for EnGenius EPG5000
|
2019-03-18 20:42:29 +01:00 |
qca9558_librerouter_librerouter-v1.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9558_netgear_ex6400.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
2019-04-09 11:09:26 +02:00 |
qca9558_netgear_ex7300.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
2019-04-09 11:09:26 +02:00 |
qca9558_netgear_ex7300.dtsi
|
ath79: fix gigabit link pll-data for EX7300
|
2019-10-21 09:08:58 +02:00 |
qca9558_ocedo_koala.dts
|
ath79: fix OCEDO Koala ethernet configuration
|
2018-12-30 20:08:13 +01:00 |
qca9558_ocedo_ursus.dts
|
ath79: correct OCEDO Ursus phy-mode property
|
2019-09-07 00:59:41 +02:00 |
qca9558_openmesh_om5p-ac-v2.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9558_tplink_archer-c5-v1.dts
|
ath79: add support for TP-Link Archer C5 v1
|
2019-02-28 11:32:55 +01:00 |
qca9558_tplink_archer-c7-v1.dts
|
ath79: make TP-Link revision naming consistent
|
2019-03-02 13:04:54 +01:00 |
qca9558_tplink_archer-c7-v2.dts
|
ath79: make TP-Link revision naming consistent
|
2019-03-02 13:04:54 +01:00 |
qca9558_tplink_archer-c7.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9558_tplink_re350k-v1.dts
|
ath79: add support for TP-Link RE350K v1
|
2019-03-11 22:00:26 +01:00 |
qca9558_tplink_tl-wdr4900-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9558_tplink_tl-wr941n-v7-cn.dts
|
ath79: add support for TP-Link TL-WR941N v7 (CN)
|
2019-03-24 01:44:27 +01:00 |
qca9558_tplink_tl-wr1043nd-v2.dts
|
ath79: make TP-Link revision naming consistent
|
2019-03-02 13:04:54 +01:00 |
qca9558_tplink_tl-wr1043nd-v3.dts
|
ath79: make TP-Link revision naming consistent
|
2019-03-02 13:04:54 +01:00 |
qca9558_tplink_tl-wr1043nd.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9561_avm_fritz4020.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9561_tplink_archer-c5x.dtsi
|
ath79: add support for Archer C58/C59 v1
|
2018-11-26 12:05:45 +01:00 |
qca9561_tplink_archer-c6x.dtsi
|
ath79: Add support for TP-Link Archer C60 v1
|
2019-11-26 17:01:20 +01:00 |
qca9561_tplink_archer-c25-v1.dts
|
ath79: Add support for TP-Link Archer C25 v1
|
2019-06-10 11:25:47 +02:00 |
qca9561_tplink_archer-c58-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
2019-02-14 16:56:14 +01:00 |
qca9561_tplink_archer-c59-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
2019-02-14 16:56:14 +01:00 |
qca9561_tplink_archer-c60-v1.dts
|
ath79: Add support for TP-Link Archer C60 v1
|
2019-11-26 17:01:20 +01:00 |
qca9561_tplink_archer-c60-v2.dts
|
ath79: Add support for TP-Link Archer C60 v2
|
2019-11-26 17:01:28 +01:00 |
qca9561_xiaomi_mi-router-4q.dts
|
ath79: add support for Xiaomi Mi Router 4Q
|
2019-02-11 19:04:06 +01:00 |
qca9563_dlink_dir-859-a1.dts
|
ath79: remap D-Link DIR-859 A1 WPS button to WPS
|
2019-11-16 23:35:44 +01:00 |
qca9563_elecom_wrc-300ghbk2-i.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_elecom_wrc-1750ghbk2-i.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_elecom_wrc-ghbk2-i.dtsi
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_glinet_gl-ar750s.dts
|
ath79: glinet_gl-ar750s: Add USB power & microSD
|
2019-05-20 21:25:00 +02:00 |
qca9563_nec_wg800hp.dts
|
ath79: add support for NEC Aterm WG800HP
|
2018-12-24 19:18:07 +01:00 |
qca9563_nec_wg1200cr.dts
|
ath79: add support for NEC Aterm WG1200CR
|
2019-04-06 19:14:06 +02:00 |
qca9563_phicomm_k2t.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
qca9563_rosinson_wr818.dts
|
ath79: use the qca,qca9563 chip compatible for the WR818
|
2019-05-18 17:59:49 +02:00 |
qca9563_tplink_archer-a7-v5.dts
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
qca9563_tplink_archer-c2-v3.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_tplink_archer-c6-v2.dts
|
ath79: add support for TP-Link Archer C6 v2
|
2018-12-31 16:25:11 +01:00 |
qca9563_tplink_archer-c7-v4.dts
|
ath79: Consistently label info partition
|
2019-06-10 11:25:41 +02:00 |
qca9563_tplink_archer-c7-v5.dts
|
ath79: Add missing read-only properties
|
2019-05-11 16:37:11 +02:00 |
qca9563_tplink_archer-x6-v2.dtsi
|
ath79: set mib-poll-interval on mdio0 attached ar83xx switch
|
2019-05-20 21:19:48 +02:00 |
qca9563_tplink_archer-x7-v5.dtsi
|
ath79: set mib-poll-interval on mdio0 attached ar83xx switch
|
2019-05-20 21:19:48 +02:00 |
qca9563_tplink_re450-v2.dts
|
ath79: Consistently label info partition
|
2019-06-10 11:25:41 +02:00 |
qca9563_tplink_tl-wr1043n-v5.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_tplink_tl-wr1043n.dtsi
|
ath79: set mib-poll-interval on mdio0 attached ar83xx switch
|
2019-05-20 21:19:48 +02:00 |
qca9563_tplink_tl-wr1043nd-v4.dts
|
ath79: Consistently label art partition with lower case
|
2019-06-10 11:25:41 +02:00 |
qca9563_ubnt_unifiac-lite.dts
|
ath79: add support for UniFi AC-LR
|
2019-10-27 18:31:53 +01:00 |
qca9563_ubnt_unifiac-lite.dtsi
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
qca9563_ubnt_unifiac-lr.dts
|
ath79: add support for UniFi AC-LR
|
2019-10-27 18:31:53 +01:00 |
qca9563_ubnt_unifiac-mesh-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
qca9563_ubnt_unifiac-mesh.dts
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
qca9563_ubnt_unifiac-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
qca9563_ubnt_unifiac-pro.dtsi
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
qca9563_ubnt_unifiac.dtsi
|
ath79: fix UniFi AC LED mapping
|
2019-09-15 12:31:56 +02:00 |
qca9563_yuncore_a782.dts
|
ath79: add support for YunCore XD4200 and A782
|
2019-11-26 18:17:39 +01:00 |
qca9563_yuncore_xd4200.dts
|
ath79: add support for YunCore XD4200 and A782
|
2019-11-26 18:17:39 +01:00 |
qca9563_yuncore_xd4200.dtsi
|
ath79: add support for YunCore XD4200 and A782
|
2019-11-26 18:17:39 +01:00 |