mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
cddd459140
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
95 lines
3.1 KiB
Diff
95 lines
3.1 KiB
Diff
From ede2da5ea630fa2431145992c43aef51fc9c5c5a Mon Sep 17 00:00:00 2001
|
|
From: Clark Wang <xiaoning.wang@nxp.com>
|
|
Date: Fri, 18 Jan 2019 12:00:16 +0800
|
|
Subject: [PATCH] MLK-20773 i2c-imx: add a limit of maximum transfer speed for
|
|
imx7d
|
|
|
|
According the e7805 in Errata, the SCK low level period should be less
|
|
than 1.3us.
|
|
|
|
The other series platform use this same IP can match the errata, and
|
|
ensure the low level period longer than 1.3us when the speed set to
|
|
400KHz. However, only at imx7d platform, the low level period is less
|
|
than 1.3us in the same situation.
|
|
|
|
Therefore, limit the maximum transfer speed to 384KHz when probe at
|
|
imx7d platform.
|
|
|
|
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
|
|
(cherry picked from commit 19f553846e872b5c379b37ed029132b79566cab0)
|
|
(cherry picked from commit 5d355407812025e5157f82b7763580e7295a40fd)
|
|
---
|
|
drivers/i2c/busses/i2c-imx.c | 26 ++++++++++++++++++++++++++
|
|
1 file changed, 26 insertions(+)
|
|
|
|
--- a/drivers/i2c/busses/i2c-imx.c
|
|
+++ b/drivers/i2c/busses/i2c-imx.c
|
|
@@ -51,6 +51,7 @@
|
|
|
|
/* Default value */
|
|
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
|
|
+#define IMX_I2C_MAX_E_BIT_RATE 384000 /* 384kHz from e7805 errata*/
|
|
|
|
/*
|
|
* Enable DMA if transfer byte size is bigger than this threshold.
|
|
@@ -161,6 +162,7 @@ enum imx_i2c_type {
|
|
IMX1_I2C,
|
|
IMX21_I2C,
|
|
VF610_I2C,
|
|
+ IMX7D_I2C,
|
|
};
|
|
|
|
struct imx_i2c_hwdata {
|
|
@@ -235,6 +237,16 @@ static struct imx_i2c_hwdata vf610_i2c_h
|
|
|
|
};
|
|
|
|
+static const struct imx_i2c_hwdata imx7d_i2c_hwdata = {
|
|
+ .devtype = IMX7D_I2C,
|
|
+ .regshift = IMX_I2C_REGSHIFT,
|
|
+ .clk_div = imx_i2c_clk_div,
|
|
+ .ndivs = ARRAY_SIZE(imx_i2c_clk_div),
|
|
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
|
|
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
|
|
+
|
|
+};
|
|
+
|
|
static const struct platform_device_id imx_i2c_devtype[] = {
|
|
{
|
|
.name = "imx1-i2c",
|
|
@@ -252,6 +264,7 @@ static const struct of_device_id i2c_imx
|
|
{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
|
|
{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
|
|
{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
|
|
+ { .compatible = "fsl,imx7d-i2c", .data = &imx7d_i2c_hwdata, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
|
|
@@ -267,6 +280,11 @@ static inline int is_imx1_i2c(struct imx
|
|
return i2c_imx->hwdata->devtype == IMX1_I2C;
|
|
}
|
|
|
|
+static inline int is_imx7d_i2c(struct imx_i2c_struct *i2c_imx)
|
|
+{
|
|
+ return i2c_imx->hwdata->devtype == IMX7D_I2C;
|
|
+}
|
|
+
|
|
static inline void imx_i2c_write_reg(unsigned int val,
|
|
struct imx_i2c_struct *i2c_imx, unsigned int reg)
|
|
{
|
|
@@ -1159,6 +1177,14 @@ static int i2c_imx_probe(struct platform
|
|
clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
|
|
i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
|
|
|
|
+ /*
|
|
+ * This limit caused by an i.MX7D hardware issue(e7805 in Errata).
|
|
+ * If there is no limit, when the bitrate set up to 400KHz, it will
|
|
+ * cause the SCK low level period less than 1.3us.
|
|
+ */
|
|
+ if (is_imx7d_i2c(i2c_imx) && i2c_imx->bitrate > IMX_I2C_MAX_E_BIT_RATE)
|
|
+ i2c_imx->bitrate = IMX_I2C_MAX_E_BIT_RATE;
|
|
+
|
|
/* Set up chip registers to defaults */
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
|
|
i2c_imx, IMX_I2C_I2CR);
|