Kuan-Yi Li f1525e785e kernel: backport GD25Q256 support from 4.15 ... Backport below changes for GigaDevice GD25Q256 support from v4.15: e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info 65153846b18c mtd: spi-nor: add support for GD25Q256 This chip is used on newer Quad-E4G boards. Before: [ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19 [ 2.372853] m25p80: probe of spi0.0 failed with error -2 After: [ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes) [ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0 [ 2.383043] Creating 5 MTD partitions on "spi0.0": [ 2.387824] 0x000000000000-0x000000030000 : "u-boot" [ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env" [ 2.400608] 0x000000031000-0x000000040000 : "config" [ 2.406830] 0x000000040000-0x000000050000 : "factory" [ 2.413169] 0x000000050000-0x000002000000 : "firmware" Signed-off-by: Kuan-Yi Li <kyli@abysm.org>		2020-12-01 21:59:30 +01:00
..
base-files	ipq806x: EA8500 fix boot partition detection	2020-06-03 15:29:03 +02:00
files-4.14/arch/arm/boot/dts	ipq806x: add missing core1 voltage tolerance	2020-02-23 08:27:32 +01:00
generic	ipqx0xx: add Generic subtarget	2019-11-03 22:26:07 +01:00
image	ipq806x: add support for Buffalo WXR-2533DHP	2019-01-01 16:39:59 +01:00
patches-4.14	kernel: backport GD25Q256 support from 4.15	2020-12-01 21:59:30 +01:00
profiles	mac80211: fix selecting of ath10k -ct firmware	2018-09-27 00:22:13 +02:00
config-4.14	ipq806x: remove unsupported hw-crypto qce driver	2019-09-28 19:17:10 +02:00
Makefile	ipqx0xx: add Generic subtarget	2019-11-03 22:26:07 +01:00