mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
0c47bdb902
Fortinet FAP-220-B is a dual-radio, dual-band 802.11n enterprise managed
access point with PoE input and single gigabit Ethernet interface.
Hardware highlights:
Power: 802.3af PoE input on Ethernet port, +12V input on 5.5/2.1mm DC jack.
SoC: Atheros AR7161 (MIPS 24kc at 680MHz)
RAM: 64MB DDR400
Flash: 16MB SPI-NOR
Wi-Fi 1: Atheros AR9220 2T2R 802.11abgn (dual-band)
Wi-Fi 2: Atheros AR9223 2T2R 802.11bgn (single-band)
Ethernet: Atheros AR8021 single gigabit Phy (RGMII)
Console: External RS232 port using Cisco 8P8C connector (9600-8-N-1)
USB: Single USB 2.0 host port
LEDs: Power (single colour, green), Wi-Fi 1, Wi-Fi 2, Ethernet, Mode, Status
(dual-colour, green and yellow)
Buttons: reset button hidden in bottom grill,
in the top row, 2nd column from the right.
Label MAC address: eth0
FCC ID: TVE-220102
Serial port pinout:
3 - TxD
4 - GND
6 - RxD
Installation: The same methods apply as for already supported FAP-221-B.
For both methods, a backup of flash partitions is recommended, as stock firmware
is not freely available on the internet.
(a) Using factory image:
1. Connect console cable to the console port
2. Connect Ethernet interface to your PC
3. Start preferred terminal at 9600-8-N-1
4. Have a TFTP server running on the PC.
5. Put the "factory" image in TFTP root
6. Power on the device
7. Break boot sequence by pressing "Ctrl+C"
8. Press "G". The console will ask you for device IP, server IP, and filename.
Enter them appropriately.
The defaults are:
Server IP: 192.168.1.1 # Update accordingly
Device IP: 192.168.1.2 # Update accordingly
Image file: image.out # Use for example: openwrt-ath79-generic-fortinet_fap-220-b-squashfs-factory.bin
9. The device will load the firmware over TFTP, and verify it. When
verification passes, press "D" to continue installation. The device
will reboot on completion.
(b) Using initramfs + sysupgrade
1. Connect console cable to the console port
2. Connect Ethernet interface to your PC
3. Start preferred terminal at 9600-8-N-1
4. Have a TFTP server running on the PC.
5. Put the "initramfs" image in TFTP root
6. Power on the device.
7. Break boot sequence by pressing "Ctrl+C"
8. Enter hidden U-boot shell by pressing "K". The password is literal "1".
9. Load the initramfs over TFTP:
> setenv serverip 192.168.1.1 # Your PC IP
> setenv ipaddr 192.168.1.22 # Device IP, both have to share a subnet.
> tftpboot 81000000 openwrt-ath79-generic-fortinet_fap-220-b-initramfs-kernel.bin
> bootm 81000000
10. (Optional) Copy over contents of at least "fwconcat0", "loader", and "fwconcat1"
partitions, to allow restoring factory firmware in future:
# cat /dev/mtd1 > /tmp/mtd1_fwconcat0.bin
# cat /dev/mtd2 > /tmp/mtd2_loader.bin
# cat /dev/mtd3 > /tmp/mtd3_fwconcat1.bin
and then SCP them over to safety at your PC.
11. When the device boots, copy over the sysupgrade image, and execute
normal upgrade:
# sysupgrade openwrt-ath79-generic-fortinet_fap-220-b-squashfs-sysupgrade.bin
Return to stock firmware:
1. Boot initramfs image as per initial installation up to point 9
2. Copy over the previously backed up contents over network
3. Write the backed up contents back:
# mtd write /tmp/mtd1_fwconcat0.bin fwconcat0
# mtd write /tmp/mtd2_loader.bin loader
# mtd write /tmp/mtd3_fwconcat1.bin fwconcat1
4. Erase the reserved partition:
# mtd erase reserved
5. Reboot the device
Quirks and known issues:
- The power LED blinking pattern is disrupted during boot, probably due
to very slow serial console, which prints a lot during boot compared
to stock FW.
- "mac-address-ascii" device tree binding cannot yet be used for address
stored in U-boot partition, because it expects the colons as delimiters,
which this address lacks. Addresses found in ART partition are used
instead.
- Due to using kmod-owl-loader, the device will lack wireless interfaces
while in initramfs, unless you compile it in.
- The device heats up A LOT on the bottom, even when idle. It even
contains a warning sticker there.
- Stock firmware uses a fully read-write filesystem for its rootfs.
- Stock firmware loads a lot of USB-serial converter drivers for use
with built-in host, probably meant for hosting modem devices.
- U-boot build of the device is stripped of all branding, despite that
evidence of it (obviously) being U-boot can be found in the binary.
- The user can break into hidden U-boot shell using key "K" after
breaking boot sequence. The password is "1" (without quotes).
- Telnet is available by default, with login "admin", without password.
The same is true for serial console, both drop straight to the Busybox
shell.
- The web interface drops to the login page again, after successfull
login.
- Whole image authentication boils down to comparing a device ID against
one stored in U-boot.
- And this device is apparently made by a security company.
Big thanks for Michael Pratt for providing support for FAP-221-B, which
shares the entirety of image configuration with this device, this saved
me a ton of work.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
3224 lines
90 KiB
Makefile
3224 lines
90 KiB
Makefile
include ./common-buffalo.mk
|
|
include ./common-netgear.mk
|
|
include ./common-senao.mk
|
|
include ./common-tp-link.mk
|
|
include ./common-yuncore.mk
|
|
include ./common-ubnt.mk
|
|
|
|
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
|
|
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
|
|
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
|
|
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
|
|
DEVICE_VARS += MOXA_MAGIC MOXA_HWID
|
|
DEVICE_VARS += OPENMESH_CE_TYPE ZYXEL_MODEL_STRING
|
|
DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES
|
|
|
|
define Build/addpattern
|
|
-$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \
|
|
-v v$(ADDPATTERN_VERSION) -i $@ -o $@.new
|
|
-mv "$@.new" "$@"
|
|
endef
|
|
|
|
define Build/append-md5sum-bin
|
|
$(MKHASH) md5 $@ | sed 's/../\\\\x&/g' |\
|
|
xargs echo -ne >> $@
|
|
endef
|
|
|
|
define Build/cybertan-trx
|
|
@echo -n '' > $@-empty.bin
|
|
-$(STAGING_DIR_HOST)/bin/trx -o $@.new \
|
|
-f $(IMAGE_KERNEL) -F $@-empty.bin \
|
|
-x 32 -a 0x10000 -x -32 -f $@
|
|
-mv "$@.new" "$@"
|
|
-rm $@-empty.bin
|
|
endef
|
|
|
|
define Build/edimax-headers
|
|
$(eval edimax_magic=$(word 1,$(1)))
|
|
$(eval edimax_model=$(word 2,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/edimax_fw_header -M $(edimax_magic) -m $(edimax_model)\
|
|
-v $(VERSION_DIST)$(firstword $(subst +, , $(firstword $(subst -, ,$(REVISION))))) \
|
|
-n "uImage" \
|
|
-i $(KDIR)/loader-$(DEVICE_NAME).uImage \
|
|
-o $@.uImage
|
|
$(STAGING_DIR_HOST)/bin/edimax_fw_header -M $(edimax_magic) -m $(edimax_model)\
|
|
-v $(VERSION_DIST)$(firstword $(subst +, , $(firstword $(subst -, ,$(REVISION))))) \
|
|
-n "rootfs" \
|
|
-i $@ \
|
|
-o $@.rootfs
|
|
cat $@.uImage $@.rootfs > $@
|
|
rm -rf $@.uImage $@.rootfs
|
|
endef
|
|
|
|
define Build/mkdapimg2
|
|
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
|
|
-i $@ -o $@.new \
|
|
-s $(DAP_SIGNATURE) \
|
|
-v $(VERSION_DIST)-$(firstword $(subst +, , \
|
|
$(firstword $(subst -, ,$(REVISION))))) \
|
|
-r Default \
|
|
$(if $(1),-k $(1))
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/mkmylofw_16m
|
|
$(eval device_id=$(word 1,$(1)))
|
|
$(eval revision=$(word 2,$(1)))
|
|
|
|
# On WPJ344, WPJ531, and WPJ563, the default boot command tries 0x9f680000
|
|
# first and fails if the remains of the stock image are sill there
|
|
# - resulting in an infinite boot loop.
|
|
# The size parameter is grown to have that block deleted if the firmware
|
|
# isn't big enough by itself.
|
|
|
|
let \
|
|
size="$$(stat -c%s $@)" \
|
|
pad="$(subst k,* 1024,$(BLOCKSIZE))" \
|
|
pad="(pad - (size % pad)) % pad" \
|
|
newsize='size + pad' ; \
|
|
[ $$newsize -lt $$((0x660000)) ] && newsize=0x660000 ; \
|
|
$(STAGING_DIR_HOST)/bin/mkmylofw \
|
|
-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
|
|
-s 0x1000000 -p0x30000:$$newsize:al:0x80060000:"OpenWRT":$@ \
|
|
$@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/mkwrggimg
|
|
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
|
|
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
|
|
-m $(DEVICE_MODEL)-$(DEVICE_VARIANT) -s $(DAP_SIGNATURE) \
|
|
-v $(VERSION_DIST) -B $(REVISION)
|
|
mv $@.imghdr $@
|
|
endef
|
|
|
|
define Build/nec-enc
|
|
$(STAGING_DIR_HOST)/bin/nec-enc \
|
|
-i $@ -o $@.new -k $(1)
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/nec-fw
|
|
( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@
|
|
( \
|
|
echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \
|
|
echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \
|
|
dd if=$@; \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/pisen_wmb001n-factory
|
|
-[ -f "$@" ] && \
|
|
mkdir -p "$@.tmp" && \
|
|
cp "$(KDIR)/loader-$(word 1,$(1)).uImage" "$@.tmp/uImage" && \
|
|
mv "$@" "$@.tmp/rootfs" && \
|
|
cp "bin/pisen_wmb001n_factory-header.bin" "$@" && \
|
|
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
-C "$@.tmp" . | gzip -9n >> "$@" && \
|
|
rm -rf "$@.tmp"
|
|
endef
|
|
|
|
define Build/teltonika-fw-fake-checksum
|
|
# Teltonika U-Boot web based firmware upgrade/recovery routine compares
|
|
# 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
|
|
# from begin of the firmware file) with 16 bytes stored just before
|
|
# 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
|
|
let \
|
|
offs="$$(stat -c%s $@) - $(1)"; \
|
|
dd if=$@ bs=1 count=16 skip=76 |\
|
|
dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
|
|
endef
|
|
|
|
define Build/teltonika-v1-header
|
|
$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
|
|
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V "RUT2xx " \
|
|
-k $@ -o $@.new $(1)
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
metadata_json_teltonika = \
|
|
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
|
|
"metadata_version": "1.1", \
|
|
"compat_version": "$(call json_quote,$(compat_version))", \
|
|
"version":"$(call json_quote,$(VERSION_DIST))-$(call json_quote,$(VERSION_NUMBER))-$(call json_quote,$(REVISION))", \
|
|
"device_code": [".*"], \
|
|
"hwver": [".*"], \
|
|
"batch": [".*"], \
|
|
"serial": [".*"], \
|
|
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
|
|
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
|
|
[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma) \
|
|
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
|
|
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_TELTONIKA_DEVICES))]$(comma)) \
|
|
"version_wrt": { \
|
|
"dist": "$(call json_quote,$(VERSION_DIST))", \
|
|
"version": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"revision": "$(call json_quote,$(REVISION))", \
|
|
"target": "$(call json_quote,$(TARGETID))", \
|
|
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
|
|
}, \
|
|
"hw_support": {}, \
|
|
"hw_mods": {} \
|
|
}'
|
|
|
|
define Build/append-metadata-teltonika
|
|
echo $(call metadata_json_teltonika) | fwtool -I - $@
|
|
endef
|
|
|
|
define Build/wrgg-pad-rootfs
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
|
endef
|
|
|
|
define Build/zyxel-tar-bz2
|
|
mkdir -p $@.tmp
|
|
mv $@ $@.tmp/$(word 2,$(1))
|
|
cp $(KDIR)/loader-$(DEVICE_NAME).uImage $@.tmp/$(word 1,$(1)).lzma.uImage
|
|
$(TAR) -cjf $@ -C $@.tmp .
|
|
rm -rf $@.tmp
|
|
endef
|
|
|
|
define Device/seama
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | seama
|
|
IMAGES += factory.bin
|
|
SEAMA_MTDBLOCK := 1
|
|
|
|
# 64 bytes offset:
|
|
# - 28 bytes seama_header
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
check-size | append-metadata
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | check-size
|
|
SEAMA_SIGNATURE :=
|
|
endef
|
|
|
|
|
|
define Device/8dev_carambola2
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := 8devices
|
|
DEVICE_MODEL := Carambola2
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += carambola2
|
|
endef
|
|
TARGET_DEVICES += 8dev_carambola2
|
|
|
|
define Device/8dev_lima
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := 8devices
|
|
DEVICE_MODEL := Lima
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 15616k
|
|
SUPPORTED_DEVICES += lima
|
|
endef
|
|
TARGET_DEVICES += 8dev_lima
|
|
|
|
define Device/adtran_bsap1880
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Adtran/Bluesocket
|
|
DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig
|
|
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
IMAGE_SIZE := 11200k
|
|
IMAGES += kernel.bin rootfs.bin
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to $$(BLOCKSIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
|
check-size | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/adtran_bsap1800-v2
|
|
$(Device/adtran_bsap1880)
|
|
DEVICE_MODEL := BSAP-1800
|
|
DEVICE_VARIANT := v2
|
|
endef
|
|
TARGET_DEVICES += adtran_bsap1800-v2
|
|
|
|
define Device/adtran_bsap1840
|
|
$(Device/adtran_bsap1880)
|
|
DEVICE_MODEL := BSAP-1840
|
|
endef
|
|
TARGET_DEVICES += adtran_bsap1840
|
|
|
|
define Device/alcatel_hh40v
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Alcatel
|
|
DEVICE_MODEL := HH40V
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-option kmod-usb-net-rndis
|
|
IMAGE_SIZE := 14976k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs
|
|
endef
|
|
TARGET_DEVICES += alcatel_hh40v
|
|
|
|
define Device/airtight_c-75
|
|
SOC := qca9550
|
|
DEVICE_VENDOR := AirTight Networks
|
|
DEVICE_MODEL := C-75
|
|
DEVICE_ALT0_VENDOR := Mojo Networks
|
|
DEVICE_ALT0_MODEL := C-75
|
|
DEVICE_ALT1_VENDOR := WatchGuard
|
|
DEVICE_ALT1_MODEL := AP320
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
|
|
IMAGE_SIZE := 32320k
|
|
KERNEL_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += airtight_c-75
|
|
|
|
define Device/alfa-network_ap121f
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := AP121F
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-storage -swconfig
|
|
IMAGE_SIZE := 16064k
|
|
SUPPORTED_DEVICES += ap121f
|
|
endef
|
|
TARGET_DEVICES += alfa-network_ap121f
|
|
|
|
define Device/alfa-network_ap121fe
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := AP121FE
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-gadget-eth -swconfig
|
|
IMAGE_SIZE := 16064k
|
|
endef
|
|
TARGET_DEVICES += alfa-network_ap121fe
|
|
|
|
define Device/alfa-network_n2q
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := N2Q
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-gpio-pcf857x kmod-usb2 \
|
|
kmod-usb-ledtrig-usbport rssileds
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
TARGET_DEVICES += alfa-network_n2q
|
|
|
|
define Device/alfa-network_n5q
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := N5Q
|
|
DEVICE_PACKAGES := rssileds
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += n5q
|
|
endef
|
|
TARGET_DEVICES += alfa-network_n5q
|
|
|
|
define Device/alfa-network_pi-wifi4
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := Pi-WiFi4
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -swconfig
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
TARGET_DEVICES += alfa-network_pi-wifi4
|
|
|
|
define Device/alfa-network_r36a
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := R36A
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += r36a
|
|
endef
|
|
TARGET_DEVICES += alfa-network_r36a
|
|
|
|
define Device/alfa-network_tube-2hq
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := Tube-2HQ
|
|
DEVICE_PACKAGES := rssileds -swconfig
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += tube-2hq
|
|
endef
|
|
TARGET_DEVICES += alfa-network_tube-2hq
|
|
|
|
define Device/allnet_all-wap02860ac
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := ALLNET
|
|
DEVICE_MODEL := ALL-WAP02860AC
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-allwap02860ac
|
|
endef
|
|
TARGET_DEVICES += allnet_all-wap02860ac
|
|
|
|
define Device/araknis_an-300-ap-i-n
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Araknis
|
|
DEVICE_MODEL := AN-300-AP-I-N
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-an300
|
|
endef
|
|
TARGET_DEVICES += araknis_an-300-ap-i-n
|
|
|
|
define Device/araknis_an-500-ap-i-ac
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Araknis
|
|
DEVICE_MODEL := AN-500-AP-I-AC
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-generic-v1-an500
|
|
endef
|
|
TARGET_DEVICES += araknis_an-500-ap-i-ac
|
|
|
|
define Device/araknis_an-700-ap-i-ac
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Araknis
|
|
DEVICE_MODEL := AN-700-AP-I-AC
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-generic-v1-an700
|
|
endef
|
|
TARGET_DEVICES += araknis_an-700-ap-i-ac
|
|
|
|
define Device/arduino_yun
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Arduino
|
|
DEVICE_MODEL := Yun
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-ledtrig-usbport \
|
|
kmod-usb-storage block-mount -swconfig
|
|
IMAGE_SIZE := 15936k
|
|
SUPPORTED_DEVICES += arduino-yun
|
|
endef
|
|
TARGET_DEVICES += arduino_yun
|
|
|
|
define Device/aruba_ap-105
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Aruba
|
|
DEVICE_MODEL := AP-105
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-tpm-i2c-atmel
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x42000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
|
|
endef
|
|
TARGET_DEVICES += aruba_ap-105
|
|
|
|
define Device/aruba_ap-115
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Aruba
|
|
DEVICE_MODEL := AP-115
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x102000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel
|
|
endef
|
|
TARGET_DEVICES += aruba_ap-115
|
|
|
|
define Device/aruba_ap-175
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Aruba
|
|
DEVICE_MODEL := AP-175
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-gpio-pca953x kmod-hwmon-lm75 kmod-i2c-gpio kmod-rtc-ds1374
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x42000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
|
|
endef
|
|
TARGET_DEVICES += aruba_ap-175
|
|
|
|
define Device/asus_pl-ac56
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := PL-AC56
|
|
DEVICE_VARIANT := A1
|
|
IMAGE_SIZE := 15488k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += asus_pl-ac56
|
|
|
|
define Device/asus_rp-ac51
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RP-AC51
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct \
|
|
-swconfig
|
|
endef
|
|
TARGET_DEVICES += asus_rp-ac51
|
|
|
|
define Device/asus_rp-ac66
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RP-AC66
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct \
|
|
rssileds -swconfig
|
|
endef
|
|
TARGET_DEVICES += asus_rp-ac66
|
|
|
|
define Device/asus_qcn5502
|
|
SOC := qcn5502
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs
|
|
endef
|
|
|
|
define Device/asus_rt-ac59u
|
|
$(Device/asus_qcn5502)
|
|
DEVICE_MODEL := RT-AC59U
|
|
DEVICE_ALT0_VENDOR := ASUS
|
|
DEVICE_ALT0_MODEL := RT-AC1200GE
|
|
DEVICE_ALT1_VENDOR := ASUS
|
|
DEVICE_ALT1_MODEL := RT-AC1500G PLUS
|
|
DEVICE_ALT2_VENDOR := ASUS
|
|
DEVICE_ALT2_MODEL := RT-AC1500UHP
|
|
DEVICE_ALT3_VENDOR := ASUS
|
|
DEVICE_ALT3_MODEL := RT-AC57U
|
|
DEVICE_ALT3_VARIANT := v2
|
|
DEVICE_ALT4_VENDOR := ASUS
|
|
DEVICE_ALT4_MODEL := RT-AC58U
|
|
DEVICE_ALT4_VARIANT := v2
|
|
DEVICE_ALT5_VENDOR := ASUS
|
|
DEVICE_ALT5_MODEL := RT-ACRH12
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES += kmod-usb2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac59u
|
|
|
|
define Device/asus_rt-ac59u-v2
|
|
$(Device/asus_qcn5502)
|
|
DEVICE_MODEL := RT-AC59U
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := ASUS
|
|
DEVICE_ALT0_MODEL := RT-AC1300G PLUS
|
|
DEVICE_ALT0_VARIANT := v3
|
|
DEVICE_ALT1_VENDOR := ASUS
|
|
DEVICE_ALT1_MODEL := RT-AC57U
|
|
DEVICE_ALT1_VARIANT := v3
|
|
DEVICE_ALT2_VENDOR := ASUS
|
|
DEVICE_ALT2_MODEL := RT-AC58U
|
|
DEVICE_ALT2_VARIANT := v3
|
|
IMAGE_SIZE := 32384k
|
|
DEVICE_PACKAGES += kmod-usb2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac59u-v2
|
|
|
|
define Device/asus_zenwifi-cd6n
|
|
$(Device/asus_qcn5502)
|
|
DEVICE_MODEL := ZenWiFi CD6N
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += asus_zenwifi-cd6n
|
|
|
|
define Device/asus_zenwifi-cd6r
|
|
$(Device/asus_qcn5502)
|
|
DEVICE_MODEL := ZenWiFi CD6R
|
|
IMAGE_SIZE := 32384k
|
|
endef
|
|
TARGET_DEVICES += asus_zenwifi-cd6r
|
|
|
|
define Device/atheros_db120
|
|
$(Device/loader-okli-uimage)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Atheros
|
|
DEVICE_MODEL := DB120
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += db120
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | pad-to 6336k | \
|
|
append-loader-okli-uimage $(1) | pad-to 64k
|
|
endef
|
|
TARGET_DEVICES += atheros_db120
|
|
|
|
define Device/avm
|
|
DEVICE_VENDOR := AVM
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
DEVICE_PACKAGES := fritz-tffs
|
|
endef
|
|
|
|
define Device/avm_fritz1750e
|
|
$(Device/avm)
|
|
SOC := qca9556
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 1750E
|
|
DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca988x-ct -swconfig
|
|
endef
|
|
TARGET_DEVICES += avm_fritz1750e
|
|
|
|
define Device/avm_fritz300e
|
|
$(Device/avm)
|
|
SOC := ar7242
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 300E
|
|
DEVICE_PACKAGES += rssileds -swconfig
|
|
SUPPORTED_DEVICES += fritz300e
|
|
endef
|
|
TARGET_DEVICES += avm_fritz300e
|
|
|
|
define Device/avm_fritz4020
|
|
$(Device/avm)
|
|
SOC := qca9561
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!Box 4020
|
|
SUPPORTED_DEVICES += fritz4020
|
|
endef
|
|
TARGET_DEVICES += avm_fritz4020
|
|
|
|
define Device/avm_fritz450e
|
|
$(Device/avm)
|
|
SOC := qca9556
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 450E
|
|
SUPPORTED_DEVICES += fritz450e
|
|
endef
|
|
TARGET_DEVICES += avm_fritz450e
|
|
|
|
define Device/avm_fritzdvbc
|
|
$(Device/avm)
|
|
SOC := qca9556
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater DVB-C
|
|
DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca988x-ct -swconfig
|
|
endef
|
|
TARGET_DEVICES += avm_fritzdvbc
|
|
|
|
define Device/belkin_f9x-v2
|
|
$(Device/loader-okli-uimage)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Belkin
|
|
IMAGE_SIZE := 14464k
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
edimax-headers $$$$(EDIMAX_HEADER_MAGIC) $$$$(EDIMAX_HEADER_MODEL) | \
|
|
pad-to $$$$(BLOCKSIZE)
|
|
endef
|
|
|
|
define Device/belkin_f9j1108-v2
|
|
$(Device/belkin_f9x-v2)
|
|
DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi)
|
|
EDIMAX_HEADER_MAGIC := F9J1108v1
|
|
EDIMAX_HEADER_MODEL := BR-6679BAC
|
|
endef
|
|
TARGET_DEVICES += belkin_f9j1108-v2
|
|
|
|
define Device/belkin_f9k1115-v2
|
|
$(Device/belkin_f9x-v2)
|
|
DEVICE_MODEL := F9K1115 v2 (AC1750 DB Wi-Fi)
|
|
EDIMAX_HEADER_MAGIC := eDiMaX
|
|
EDIMAX_HEADER_MODEL := F9K1115V2
|
|
endef
|
|
TARGET_DEVICES += belkin_f9k1115-v2
|
|
|
|
define Device/buffalo_bhr-4grv
|
|
$(Device/buffalo_common)
|
|
SOC := ar7242
|
|
DEVICE_MODEL := BHR-4GRV
|
|
BUFFALO_PRODUCT := BHR-4GRV
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_bhr-4grv
|
|
|
|
define Device/buffalo_bhr-4grv2
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := BHR-4GRV2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += buffalo_bhr-4grv2
|
|
|
|
define Device/buffalo_wzr_ar7161
|
|
$(Device/buffalo_common)
|
|
SOC := ar7161
|
|
BUFFALO_PRODUCT := WZR-HP-AG300H
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader
|
|
IMAGE_SIZE := 32320k
|
|
SUPPORTED_DEVICES += wzr-hp-ag300h
|
|
endef
|
|
|
|
define Device/buffalo_wzr-600dhp
|
|
$(Device/buffalo_wzr_ar7161)
|
|
DEVICE_MODEL := WZR-600DHP
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-600dhp
|
|
|
|
define Device/buffalo_wzr-hp-ag300h
|
|
$(Device/buffalo_wzr_ar7161)
|
|
DEVICE_MODEL := WZR-HP-AG300H
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-ag300h
|
|
|
|
define Device/buffalo_wzr-hp-g300nh
|
|
$(Device/buffalo_common)
|
|
SOC := ar9132
|
|
BUFFALO_PRODUCT := WZR-HP-G300NH
|
|
BUFFALO_HWVER := 1
|
|
DEVICE_PACKAGES := kmod-gpio-cascade kmod-mux-gpio kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BLOCKSIZE := 128k
|
|
IMAGE_SIZE := 32128k
|
|
SUPPORTED_DEVICES += wzr-hp-g300nh
|
|
endef
|
|
|
|
define Device/buffalo_wzr-hp-g300nh-rb
|
|
$(Device/buffalo_wzr-hp-g300nh)
|
|
DEVICE_MODEL := WZR-HP-G300NH (RTL8366RB switch)
|
|
DEVICE_PACKAGES += kmod-switch-rtl8366rb
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g300nh-rb
|
|
|
|
define Device/buffalo_wzr-hp-g300nh-s
|
|
$(Device/buffalo_wzr-hp-g300nh)
|
|
DEVICE_MODEL := WZR-HP-G300NH (RTL8366S switch)
|
|
DEVICE_PACKAGES += kmod-switch-rtl8366s
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g300nh-s
|
|
|
|
define Device/buffalo_wzr-hp-g302h-a1a0
|
|
$(Device/buffalo_common)
|
|
SOC := ar7242
|
|
DEVICE_MODEL := WZR-HP-G302H
|
|
DEVICE_VARIANT := A1A0
|
|
BUFFALO_PRODUCT := WZR-HP-G302H
|
|
BUFFALO_HWVER := 4
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32128k
|
|
SUPPORTED_DEVICES += wzr-hp-g300nh2
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0
|
|
|
|
define Device/buffalo_wzr-hp-g450h
|
|
$(Device/buffalo_common)
|
|
SOC := ar7242
|
|
DEVICE_MODEL := WZR-HP-G450H/WZR-450HP
|
|
BUFFALO_PRODUCT := WZR-HP-G450H
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
|
|
|
define Device/comfast_cf-e110n-v2
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E110N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e110n-v2
|
|
|
|
define Device/comfast_cf-e120a-v3
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E120A
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := rssileds -uboot-envtools
|
|
IMAGE_SIZE := 8000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e120a-v3
|
|
|
|
define Device/comfast_cf-e130n-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E130N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e130n-v2
|
|
|
|
define Device/comfast_cf-e313ac
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E313AC
|
|
DEVICE_PACKAGES := rssileds kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca9888-ct -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e313ac
|
|
|
|
define Device/comfast_cf-e314n-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E314N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e314n-v2
|
|
|
|
define Device/comfast_cf-e375ac
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E375AC
|
|
DEVICE_PACKAGES := kmod-ath10k-ct \
|
|
ath10k-firmware-qca9888-ct -uboot-envtools
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e375ac
|
|
|
|
define Device/comfast_cf-e380ac-v2
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E380AC
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
|
|
kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e380ac-v2
|
|
|
|
define Device/comfast_cf-e5
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E5/E7
|
|
DEVICE_PACKAGES := rssileds kmod-usb2 kmod-usb-net-qmi-wwan -swconfig \
|
|
-uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e5
|
|
|
|
define Device/comfast_cf-e560ac
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E560AC
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e560ac
|
|
|
|
define Device/comfast_cf-ew72
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-EW72
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
|
|
-uboot-envtools -swconfig
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-ew72
|
|
|
|
define Device/comfast_cf-wr650ac-v1
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR650AC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr650ac-v1
|
|
|
|
define Device/comfast_cf-wr650ac-v2
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR650AC
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr650ac-v2
|
|
|
|
define Device/comfast_cf-wr752ac-v1
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR752AC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
|
|
-uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr752ac-v1
|
|
|
|
define Device/compex_wpj344-16m
|
|
SOC := ar9344
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPJ344
|
|
DEVICE_VARIANT := 16M
|
|
SUPPORTED_DEVICES += wpj344
|
|
IMAGES += cpximg-6a08.bin
|
|
IMAGE/cpximg-6a08.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x690 3
|
|
endef
|
|
TARGET_DEVICES += compex_wpj344-16m
|
|
|
|
define Device/compex_wpj531-16m
|
|
SOC := qca9531
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPJ531
|
|
DEVICE_VARIANT := 16M
|
|
SUPPORTED_DEVICES += wpj531
|
|
IMAGES += cpximg-7a03.bin cpximg-7a04.bin cpximg-7a06.bin cpximg-7a07.bin
|
|
IMAGE/cpximg-7a03.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x68a 2
|
|
IMAGE/cpximg-7a04.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
|
IMAGE/cpximg-7a06.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
|
IMAGE/cpximg-7a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x693 3
|
|
endef
|
|
TARGET_DEVICES += compex_wpj531-16m
|
|
|
|
define Device/compex_wpj558-16m
|
|
SOC := qca9558
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPJ558
|
|
DEVICE_VARIANT := 16M
|
|
SUPPORTED_DEVICES += wpj558
|
|
IMAGES += cpximg-6a07.bin
|
|
IMAGE/cpximg-6a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | mkmylofw_16m 0x691 3
|
|
DEVICE_PACKAGES := kmod-gpio-beeper
|
|
endef
|
|
TARGET_DEVICES += compex_wpj558-16m
|
|
|
|
define Device/compex_wpj563
|
|
SOC := qca9563
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb3
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_VENDOR := Compex
|
|
DEVICE_MODEL := WPJ563
|
|
SUPPORTED_DEVICES += wpj563
|
|
IMAGES += cpximg-7a02.bin
|
|
IMAGE/cpximg-7a02.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | mkmylofw_16m 0x694 2
|
|
endef
|
|
TARGET_DEVICES += compex_wpj563
|
|
|
|
define Device/devolo_dlan-pro-1200plus-ac
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := dLAN pro 1200+ WiFi ac
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
TARGET_DEVICES += devolo_dlan-pro-1200plus-ac
|
|
|
|
define Device/devolo_wifi-pro
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
|
|
define Device/devolo_dvl1200e
|
|
$(Device/devolo_wifi-pro)
|
|
DEVICE_MODEL := WiFi pro 1200e
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1200e
|
|
|
|
define Device/devolo_dvl1200i
|
|
$(Device/devolo_wifi-pro)
|
|
DEVICE_MODEL := WiFi pro 1200i
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1200i
|
|
|
|
define Device/devolo_dvl1750c
|
|
$(Device/devolo_wifi-pro)
|
|
DEVICE_MODEL := WiFi pro 1750c
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750c
|
|
|
|
define Device/devolo_dvl1750e
|
|
$(Device/devolo_wifi-pro)
|
|
DEVICE_MODEL := WiFi pro 1750e
|
|
DEVICE_PACKAGES += kmod-usb2
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750e
|
|
|
|
define Device/devolo_dvl1750i
|
|
$(Device/devolo_wifi-pro)
|
|
DEVICE_MODEL := WiFi pro 1750i
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750i
|
|
|
|
define Device/devolo_dvl1750x
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1750x
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750x
|
|
|
|
define Device/devolo_magic-2-wifi
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := Magic 2 WiFi
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
TARGET_DEVICES += devolo_magic-2-wifi
|
|
|
|
define Device/dlink_dap-13xx
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES += rssileds
|
|
IMAGE_SIZE := 7936k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | mkdapimg2 0xE0000
|
|
endef
|
|
|
|
define Device/dlink_dap-1330-a1
|
|
$(Device/dlink_dap-13xx)
|
|
DEVICE_MODEL := DAP-1330
|
|
DEVICE_VARIANT := A1
|
|
DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330
|
|
SUPPORTED_DEVICES += dap-1330-a1
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-1330-a1
|
|
|
|
define Device/dlink_dap-1365-a1
|
|
$(Device/dlink_dap-13xx)
|
|
DEVICE_MODEL := DAP-1365
|
|
DEVICE_VARIANT := A1
|
|
DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1365
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-1365-a1
|
|
|
|
define Device/dlink_dap-2xxx
|
|
IMAGES += factory.img
|
|
IMAGE/factory.img := append-kernel | pad-offset 6144k 160 | \
|
|
append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size
|
|
IMAGE/sysupgrade.bin := append-kernel | mkwrggimg | \
|
|
pad-to $$$$(BLOCKSIZE) | append-rootfs | wrgg-pad-rootfs | \
|
|
check-size | append-metadata
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
|
|
endef
|
|
|
|
define Device/dlink_dap-2230-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-2230
|
|
DEVICE_VARIANT := A1
|
|
IMAGE_SIZE := 15232k
|
|
DAP_SIGNATURE := wapn31_dkbs_dap2230
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-2230-a1
|
|
|
|
define Device/dlink_dap-2660-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-2660
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15232k
|
|
DAP_SIGNATURE := wapac09_dkbs_dap2660
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-2660-a1
|
|
|
|
define Device/dlink_dap-2680-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-2680
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15232k
|
|
DAP_SIGNATURE := wapac36_dkbs_dap2680
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-2680-a1
|
|
|
|
define Device/dlink_dap-2695-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-2695
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15360k
|
|
DAP_SIGNATURE := wapac02_dkbs_dap2695
|
|
SUPPORTED_DEVICES += dap-2695-a1
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-2695-a1
|
|
|
|
define Device/dlink_dap-3320-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-3320
|
|
DEVICE_VARIANT := A1
|
|
IMAGE_SIZE := 15296k
|
|
DAP_SIGNATURE := wapn29_dkbs_dap3320
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-3320-a1
|
|
|
|
define Device/dlink_dap-3662-a1
|
|
$(Device/dlink_dap-2xxx)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DAP-3662
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15296k
|
|
DAP_SIGNATURE := wapac11_dkbs_dap3662
|
|
endef
|
|
TARGET_DEVICES += dlink_dap-3662-a1
|
|
|
|
define Device/dlink_dch-g020-a1
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DCH-G020
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := kmod-gpio-pca953x kmod-i2c-gpio kmod-usb2 kmod-usb-acm
|
|
IMAGES += factory.bin
|
|
IMAGE_SIZE := 14784k
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | mkdapimg2 0x20000
|
|
DAP_SIGNATURE := HONEYBEE-FIRMWARE-DCH-G020
|
|
endef
|
|
TARGET_DEVICES += dlink_dch-g020-a1
|
|
|
|
define Device/dlink_dir-505
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-505
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
SUPPORTED_DEVICES += dir-505-a1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-505
|
|
|
|
define Device/dlink_dir-629-a1
|
|
$(Device/seama)
|
|
SOC := qca9558
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-629
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := -uboot-envtools
|
|
SEAMA_MTDBLOCK := 6
|
|
SEAMA_SIGNATURE := wrgn83_dlob.hans_dir629
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-629-a1
|
|
|
|
define Device/dlink_dir-825-b1
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-825
|
|
DEVICE_VARIANT := B1
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader kmod-switch-rtl8366s
|
|
IMAGE_SIZE := 7808k
|
|
FACTORY_SIZE := 6144k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size $$$$(FACTORY_SIZE) | pad-to $$$$(FACTORY_SIZE) | \
|
|
append-string 01AP94-AR7161-RT-080619-00
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-825-b1
|
|
|
|
define Device/dlink_dir-825-c1
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-825
|
|
DEVICE_VARIANT := C1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset \
|
|
kmod-owl-loader
|
|
SUPPORTED_DEVICES += dir-825-c1
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00DB120AR9344-RT-101214-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-825-c1
|
|
|
|
define Device/dlink_dir-835-a1
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-835
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-leds-reset kmod-owl-loader
|
|
SUPPORTED_DEVICES += dir-835-a1
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00DB120AR9344-RT-101214-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-835-a1
|
|
|
|
define Device/dlink_dir-842-c
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-842
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | seama
|
|
IMAGES += factory.bin
|
|
SEAMA_MTDBLOCK := 5
|
|
SEAMA_SIGNATURE := wrgac65_dlink.2015_dir842
|
|
# 64 bytes offset:
|
|
# - 28 bytes seama_header
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
IMAGE/default := append-kernel | uImage lzma | \
|
|
pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
check-size | append-metadata
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | check-size
|
|
IMAGE_SIZE := 15680k
|
|
endef
|
|
|
|
define Device/dlink_dir-842-c1
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c1
|
|
|
|
define Device/dlink_dir-842-c2
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c2
|
|
|
|
define Device/dlink_dir-842-c3
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C3
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c3
|
|
|
|
define Device/dlink_dir-859-ax
|
|
$(Device/seama)
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-859
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
|
|
endef
|
|
|
|
define Device/dlink_dir-859-a1
|
|
$(Device/dlink_dir-859-ax)
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-859-a1
|
|
|
|
define Device/dlink_dir-859-a3
|
|
$(Device/dlink_dir-859-ax)
|
|
DEVICE_VARIANT := A3
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-859-a3
|
|
|
|
define Device/dlink_dir-869-a1
|
|
$(Device/seama)
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-869
|
|
DEVICE_VARIANT := A1
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
|
|
SUPPORTED_DEVICES += dir-869-a1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-869-a1
|
|
|
|
define Device/elecom_wrc-1750ghbk2-i
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-1750GHBK2-I/C
|
|
IMAGE_SIZE := 15808k
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.bin
|
|
ARTIFACT/initramfs-factory.bin := append-image initramfs-kernel.bin | \
|
|
pad-to 2 | edimax-header -b -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | \
|
|
elecom-product-header WRC-1750GHBK2 | check-size
|
|
endif
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750ghbk2-i
|
|
|
|
define Device/elecom_wrc-300ghbk2-i
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-300GHBK2-I
|
|
IMAGE_SIZE := 7616k
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.bin
|
|
ARTIFACT/initramfs-factory.bin := append-image initramfs-kernel.bin | \
|
|
pad-to 2 | edimax-header -b -s CSYS -m RN51 -f 0x70000 -S 0x01100000 | \
|
|
elecom-product-header WRC-300GHBK2-I | check-size
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-300ghbk2-i
|
|
|
|
define Device/embeddedwireless_balin
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Embedded Wireless
|
|
DEVICE_MODEL := Balin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += embeddedwireless_balin
|
|
|
|
define Device/embeddedwireless_dorin
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Embedded Wireless
|
|
DEVICE_MODEL := Dorin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += embeddedwireless_dorin
|
|
|
|
define Device/engenius_eap1200h
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EAP1200H
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := ar71xx-generic-eap1200h
|
|
endef
|
|
TARGET_DEVICES += engenius_eap1200h
|
|
|
|
define Device/engenius_eap1750h
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EAP1750H
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := ar71xx-generic-eap1750h
|
|
endef
|
|
TARGET_DEVICES += engenius_eap1750h
|
|
|
|
define Device/engenius_eap300-v2
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EAP300
|
|
DEVICE_VARIANT := v2
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-eap300v2
|
|
endef
|
|
TARGET_DEVICES += engenius_eap300-v2
|
|
|
|
define Device/engenius_eap600
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EAP600
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-eap600
|
|
endef
|
|
TARGET_DEVICES += engenius_eap600
|
|
|
|
define Device/engenius_ecb1200
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ECB1200
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15680k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x6e -t 2
|
|
endef
|
|
TARGET_DEVICES += engenius_ecb1200
|
|
|
|
define Device/engenius_ecb1750
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ECB1750
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 15680k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x6d -t 2
|
|
endef
|
|
TARGET_DEVICES += engenius_ecb1750
|
|
|
|
define Device/engenius_ecb600
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ECB600
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-ecb600
|
|
endef
|
|
TARGET_DEVICES += engenius_ecb600
|
|
|
|
define Device/engenius_ens202ext-v1
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ENS202EXT
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := rssileds
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-ens202ext
|
|
endef
|
|
TARGET_DEVICES += engenius_ens202ext-v1
|
|
|
|
define Device/engenius_enstationac-v1
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EnStationAC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := ar71xx-generic-enstationac
|
|
endef
|
|
TARGET_DEVICES += engenius_enstationac-v1
|
|
|
|
define Device/engenius_epg5000
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EPG5000
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x71 -t 2
|
|
SUPPORTED_DEVICES += epg5000
|
|
endef
|
|
TARGET_DEVICES += engenius_epg5000
|
|
|
|
define Device/engenius_esr1200
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ESR1200
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x61 -t 2
|
|
SUPPORTED_DEVICES += esr1200 esr1750 engenius,esr1750
|
|
endef
|
|
TARGET_DEVICES += engenius_esr1200
|
|
|
|
define Device/engenius_esr1750
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ESR1750
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x62 -t 2
|
|
SUPPORTED_DEVICES += esr1750 esr1200 engenius,esr1200
|
|
endef
|
|
TARGET_DEVICES += engenius_esr1750
|
|
|
|
define Device/engenius_esr900
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ESR900
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x4e -t 2
|
|
SUPPORTED_DEVICES += esr900
|
|
endef
|
|
TARGET_DEVICES += engenius_esr900
|
|
|
|
define Device/engenius_ews511ap
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EWS511AP
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += engenius_ews511ap
|
|
|
|
define Device/engenius_ews660ap
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EWS660AP
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := ar71xx-generic-ews660ap
|
|
endef
|
|
TARGET_DEVICES += engenius_ews660ap
|
|
|
|
define Device/enterasys_ws-ap3705i
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Enterasys
|
|
DEVICE_MODEL := WS-AP3705i
|
|
IMAGE_SIZE := 30528k
|
|
endef
|
|
TARGET_DEVICES += enterasys_ws-ap3705i
|
|
|
|
define Device/etactica_eg200
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := eTactica
|
|
DEVICE_MODEL := EG200
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
|
|
kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += rme-eg200
|
|
endef
|
|
TARGET_DEVICES += etactica_eg200
|
|
|
|
define Device/extreme-networks_ws-ap3805i
|
|
SOC := qca9557
|
|
BLOCKSIZE := 256k
|
|
DEVICE_VENDOR := Extreme Networks
|
|
DEVICE_MODEL := WS-AP3805i
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 29440k
|
|
endef
|
|
TARGET_DEVICES += extreme-networks_ws-ap3805i
|
|
|
|
define Device/fortinet_fap_common
|
|
$(Device/senao_loader_okli)
|
|
DEVICE_VENDOR := Fortinet
|
|
IMAGE_SIZE := 9216k
|
|
LOADER_FLASH_OFFS := 0x040000
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | \
|
|
check-size | pad-to $$$$(IMAGE_SIZE) | \
|
|
append-loader-okli-uimage $(1) | pad-to 10944k | \
|
|
gzip-filename $$$$(FACTORY_IMG_NAME)
|
|
endef
|
|
|
|
define Device/fortinet_fap-220-b
|
|
$(Device/fortinet_fap_common)
|
|
SOC := ar7161
|
|
DEVICE_MODEL := FAP-220-B
|
|
FACTORY_IMG_NAME := FAP22B-9.99-AP-build999-999999-patch99
|
|
DEVICE_PACKAGES := -uboot-envtools kmod-usb-ohci kmod-usb2 \
|
|
kmod-owl-loader
|
|
endef
|
|
TARGET_DEVICES += fortinet_fap-220-b
|
|
|
|
define Device/fortinet_fap-221-b
|
|
$(Device/fortinet_fap_common)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := FAP-221-B
|
|
FACTORY_IMG_NAME := FP221B-9.99-AP-build999-999999-patch99
|
|
endef
|
|
TARGET_DEVICES += fortinet_fap-221-b
|
|
|
|
define Device/glinet_6408
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := 6408
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 8000k
|
|
TPLINK_HWID := 0x08000001
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += gl-inet
|
|
endef
|
|
TARGET_DEVICES += glinet_6408
|
|
|
|
define Device/glinet_6416
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := 6416
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16192k
|
|
TPLINK_HWID := 0x08000001
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += gl-inet
|
|
endef
|
|
TARGET_DEVICES += glinet_6416
|
|
|
|
define Device/glinet_gl-ar150
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR150
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar150
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar150
|
|
|
|
define Device/glinet_gl-ar300m-common-nor
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar300m
|
|
endef
|
|
|
|
define Device/glinet_gl-ar300m-lite
|
|
$(Device/glinet_gl-ar300m-common-nor)
|
|
DEVICE_MODEL := GL-AR300M
|
|
DEVICE_VARIANT := Lite
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-lite
|
|
|
|
define Device/glinet_gl-ar300m16
|
|
$(Device/glinet_gl-ar300m-common-nor)
|
|
DEVICE_MODEL := GL-AR300M16
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m16
|
|
|
|
define Device/glinet_gl-ar750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR750
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar750
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750
|
|
|
|
define Device/glinet_gl-mifi
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNET
|
|
DEVICE_MODEL := GL-MiFi
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-mifi
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mifi
|
|
|
|
define Device/glinet_gl-usb150
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNET
|
|
DEVICE_MODEL := GL-USB150
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-usb150
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-usb150
|
|
|
|
define Device/glinet_gl-x300b
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-X300B
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x300b
|
|
|
|
define Device/glinet_gl-x750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-X750
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x750
|
|
|
|
define Device/hak5_lan-turtle
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Hak5
|
|
DEVICE_MODEL := LAN Turtle
|
|
TPLINK_HWID := 0x5348334c
|
|
IMAGES := sysupgrade.bin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
|
|
-uboot-envtools -wpad-basic-mbedtls
|
|
SUPPORTED_DEVICES += lan-turtle
|
|
endef
|
|
TARGET_DEVICES += hak5_lan-turtle
|
|
|
|
define Device/hak5_packet-squirrel
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Hak5
|
|
DEVICE_MODEL := Packet Squirrel
|
|
TPLINK_HWID := 0x5351524c
|
|
IMAGES := sysupgrade.bin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
|
|
-uboot-envtools -wpad-basic-mbedtls
|
|
SUPPORTED_DEVICES += packet-squirrel
|
|
endef
|
|
TARGET_DEVICES += hak5_packet-squirrel
|
|
|
|
define Device/hak5_wifi-pineapple-nano
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Hak5
|
|
DEVICE_MODEL := WiFi Pineapple NANO
|
|
TPLINK_HWID := 0x4e414e4f
|
|
IMAGES := sysupgrade.bin
|
|
DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-chipidea2 kmod-usb-storage \
|
|
-swconfig -uboot-envtools
|
|
SUPPORTED_DEVICES += wifi-pineapple-nano
|
|
endef
|
|
TARGET_DEVICES += hak5_wifi-pineapple-nano
|
|
|
|
define Device/hiwifi_hc6361
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC6361
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage \
|
|
kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs
|
|
BOARDNAME := HiWiFi-HC6361
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc6361
|
|
|
|
define Device/iodata_etg3-r
|
|
SOC := ar9342
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := ETG3-R
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic-mbedtls
|
|
endef
|
|
TARGET_DEVICES += iodata_etg3-r
|
|
|
|
define Device/iodata_wn-ac1167dgr
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1167DGR
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x61 -t 2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1167dgr
|
|
|
|
define Device/iodata_wn-ac1600dgr
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1600DGR
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x60 -t 2 -v 200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1600dgr
|
|
|
|
define Device/iodata_wn-ac1600dgr2
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1600DGR2/DGR3
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += dgr2-dgr3-factory.bin
|
|
IMAGE/dgr2-dgr3-factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x60 -t 2 -v 200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1600dgr2
|
|
|
|
define Device/iodata_wn-ag300dgr
|
|
SOC := ar1022
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AG300DGR
|
|
IMAGE_SIZE := 15424k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x47 -t 2
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ag300dgr
|
|
|
|
define Device/jjplus_ja76pf2
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := jjPlus
|
|
DEVICE_MODEL := JA76PF2
|
|
DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-basic-mbedtls -uboot-envtools fconfig kmod-hwmon-lm75
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x60000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile | lzma | pad-to 128k
|
|
ARTIFACTS := loader.bin
|
|
ARTIFACT/loader.bin := append-loader-okli $(1)
|
|
IMAGES += firmware.bin
|
|
IMAGE/firmware.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/firmware.bin) | \
|
|
sysupgrade-tar kernel=$$$$(KDIR)/loader-$(1).bin rootfs=$$$$@ | append-metadata
|
|
KERNEL := kernel-bin | append-dtb | lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (19.07 and 21.02) \
|
|
due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. \
|
|
Downgrading OpenWrt version will involve usage of bootloader command line interface.
|
|
endef
|
|
TARGET_DEVICES += jjplus_ja76pf2
|
|
|
|
define Device/jjplus_jwap230
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := jjPlus
|
|
DEVICE_MODEL := JWAP230
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += jjplus_jwap230
|
|
|
|
define Device/joyit_jt-or750i
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Joy-IT
|
|
DEVICE_MODEL := JT-OR750i
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += joyit_jt-or750i
|
|
|
|
define Device/kuwfi_c910
|
|
$(Device/loader-okli-uimage)
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := KuWFi
|
|
DEVICE_MODEL := C910
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-cdc-ether comgt-ncm
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
|
|
append-loader-okli-uimage $(1) | pad-to 64k
|
|
endef
|
|
TARGET_DEVICES += kuwfi_c910
|
|
|
|
define Device/letv_lba-047-ch
|
|
$(Device/loader-okli-uimage)
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Letv
|
|
DEVICE_MODEL := LBA-047-CH
|
|
DEVICE_PACKAGES := -uboot-envtools
|
|
FACTORY_SIZE := 14528k
|
|
IMAGE_SIZE := 15936k
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGES += kernel.bin rootfs.bin
|
|
IMAGE/kernel.bin := append-loader-okli-uimage $(1) | pad-to 64k
|
|
IMAGE/rootfs.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size $$$$(FACTORY_SIZE)
|
|
endef
|
|
TARGET_DEVICES += letv_lba-047-ch
|
|
|
|
define Device/librerouter_librerouter-v1
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Librerouter
|
|
DEVICE_MODEL := LibreRouter
|
|
DEVICE_VARIANT := v1
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
endef
|
|
TARGET_DEVICES += librerouter_librerouter-v1
|
|
|
|
define Device/meraki_mr12
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR12
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_PACKAGES := kmod-owl-loader rssileds
|
|
SUPPORTED_DEVICES += mr12
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Partitions differ from ar71xx version of MR12. Image format is incompatible. \
|
|
To use sysupgrade, you must change /lib/update/common.sh::get_image to prepend 128K zeroes to this image, \
|
|
and change the bootcmd in u-boot to "bootm 0xbf0a0000". After that, you can use "sysupgrade -F -n". \
|
|
Make sure you do not keep your old config, as ethernet setup is not compatible either. \
|
|
For more details, see the OpenWrt Wiki: https://openwrt.org/toh/meraki/MR12, \
|
|
or the commit message of the MR12 ath79 port on git.openwrt.org.
|
|
endef
|
|
TARGET_DEVICES += meraki_mr12
|
|
|
|
define Device/meraki_mr16
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR16
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_PACKAGES := kmod-owl-loader
|
|
SUPPORTED_DEVICES += mr16
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Partitions differ from ar71xx version of MR16. Image format is incompatible. \
|
|
To use sysupgrade, you must change /lib/update/common.sh::get_image to prepend 128K zeroes to this image, \
|
|
and change the bootcmd in u-boot to "bootm 0xbf0a0000". After that, you can use "sysupgrade -F". \
|
|
For more details, see the OpenWrt Wiki: https://openwrt.org/toh/meraki/mr16, \
|
|
or the commit message of the MR16 ath79 port on git.openwrt.org.
|
|
endef
|
|
TARGET_DEVICES += meraki_mr16
|
|
|
|
define Device/mercury_mw4530r-v1
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Mercury
|
|
DEVICE_MODEL := MW4530R
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
TPLINK_HWID := 0x45300001
|
|
SUPPORTED_DEVICES += tl-wdr4300
|
|
endef
|
|
TARGET_DEVICES += mercury_mw4530r-v1
|
|
|
|
define Device/moxa_awk-1137c
|
|
SOC := ar9344
|
|
DEVICE_MODEL := AWK-1137C
|
|
DEVICE_VENDOR := MOXA
|
|
MOXA_MAGIC := 0x8919123028877702
|
|
MOXA_HWID := 0x01080000
|
|
IMAGE_SIZE := 14336k
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
IMAGES += factory.rom
|
|
IMAGE/factory.rom := $$(IMAGE/sysupgrade.bin) | moxa-encode-fw
|
|
endef
|
|
TARGET_DEVICES += moxa_awk-1137c
|
|
|
|
define Device/nec_wx1200cr
|
|
DEVICE_VENDOR := NEC
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
|
|
define Device/nec_wf1200cr
|
|
$(Device/nec_wx1200cr)
|
|
SOC := qca9561
|
|
DEVICE_MODEL := Aterm WF1200CR
|
|
IMAGE_SIZE := 7680k
|
|
SEAMA_MTDBLOCK := 5
|
|
SEAMA_SIGNATURE := wrgac62_necpf.2016gui_wf1200cr
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | nec-enc ryztfyutcrqqo69d | check-size
|
|
endef
|
|
TARGET_DEVICES += nec_wf1200cr
|
|
|
|
define Device/nec_wg1200cr
|
|
$(Device/nec_wx1200cr)
|
|
SOC := qca9563
|
|
DEVICE_MODEL := Aterm WG1200CR
|
|
IMAGE_SIZE := 7616k
|
|
SEAMA_MTDBLOCK := 6
|
|
SEAMA_SIGNATURE := wrgac72_necpf.2016gui_wg1200cr
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | nec-enc 9gsiy9nzep452pad | check-size
|
|
endef
|
|
TARGET_DEVICES += nec_wg1200cr
|
|
|
|
define Device/nec_wg800hp
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG800HP
|
|
IMAGE_SIZE := 7104k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
xor-image -p 6A57190601121E4C004C1E1201061957 -x | nec-fw LASER_ATERM
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct-full-htt
|
|
endef
|
|
TARGET_DEVICES += nec_wg800hp
|
|
|
|
define Device/netgear_ex7300
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX7300
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := EX6400
|
|
NETGEAR_BOARD_ID := EX7300series
|
|
NETGEAR_HW_ID := 29765104+16+0+128
|
|
IMAGE_SIZE := 15552k
|
|
IMAGES += factory.img
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
netgear-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
|
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct
|
|
SUPPORTED_DEVICES += netgear,ex6400
|
|
endef
|
|
TARGET_DEVICES += netgear_ex7300
|
|
|
|
define Device/netgear_ex7300-v2
|
|
SOC := qcn5502
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX7300
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := EX6250
|
|
DEVICE_ALT1_VENDOR := NETGEAR
|
|
DEVICE_ALT1_MODEL := EX6400
|
|
DEVICE_ALT1_VARIANT := v2
|
|
DEVICE_ALT2_VENDOR := NETGEAR
|
|
DEVICE_ALT2_MODEL := EX6410
|
|
DEVICE_ALT3_VENDOR := NETGEAR
|
|
DEVICE_ALT3_MODEL := EX6420
|
|
DEVICE_ALT4_VENDOR := NETGEAR
|
|
DEVICE_ALT4_MODEL := EX7320
|
|
NETGEAR_BOARD_ID := EX7300v2series
|
|
NETGEAR_HW_ID := 29765907+16+0+128
|
|
IMAGE_SIZE := 14528k
|
|
IMAGES += factory.img
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
netgear-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
|
|
IMAGE/factory.img := $$(IMAGE/default) | check-size | netgear-dni
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9984-ct
|
|
endef
|
|
TARGET_DEVICES += netgear_ex7300-v2
|
|
|
|
define Device/netgear_wndap360
|
|
$(Device/netgear_generic)
|
|
SOC := ar7161
|
|
DEVICE_MODEL := WNDAP360
|
|
DEVICE_PACKAGES := kmod-leds-reset
|
|
IMAGE_SIZE := 7744k
|
|
BLOCKSIZE := 256k
|
|
KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_wndap360
|
|
|
|
define Device/netgear_wndr3x00
|
|
$(Device/netgear_generic)
|
|
SOC := ar7161
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader kmod-switch-rtl8366s
|
|
endef
|
|
|
|
define Device/netgear_wndr3700
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x33373030
|
|
NETGEAR_BOARD_ID := WNDR3700
|
|
IMAGE_SIZE := 7680k
|
|
IMAGES += factory-NA.img
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
|
|
check-size
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700
|
|
|
|
define Device/netgear_wndr3700-v2
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v2
|
|
UIMAGE_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3700v2
|
|
NETGEAR_HW_ID := 29763654+16+64
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700 netgear,wndr3700v2
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v2
|
|
|
|
define Device/netgear_wndr3800
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3800
|
|
UIMAGE_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800
|
|
|
|
define Device/netgear_wndr3800ch
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3800CH
|
|
UIMAGE_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3800CH
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800ch
|
|
|
|
define Device/netgear_wndrmac-v1
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDRMAC
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDRMAC
|
|
NETGEAR_HW_ID := 29763654+16+64
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndrmac-v1
|
|
|
|
define Device/netgear_wndrmac-v2
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDRMAC
|
|
DEVICE_VARIANT := v2
|
|
UIMAGE_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDRMACv2
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndrmac-v2
|
|
|
|
define Device/netgear_wnr2200_common
|
|
$(Device/netgear_generic)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := WNR2200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
UIMAGE_MAGIC := 0x32323030
|
|
NETGEAR_BOARD_ID := wnr2200
|
|
endef
|
|
|
|
define Device/netgear_wnr2200-8m
|
|
$(Device/netgear_wnr2200_common)
|
|
DEVICE_VARIANT := 8M
|
|
NETGEAR_HW_ID := 29763600+08+64
|
|
IMAGE_SIZE := 7808k
|
|
IMAGES += factory-NA.img
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
|
|
check-size
|
|
SUPPORTED_DEVICES += wnr2200
|
|
endef
|
|
TARGET_DEVICES += netgear_wnr2200-8m
|
|
|
|
define Device/netgear_wnr2200-16m
|
|
$(Device/netgear_wnr2200_common)
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := WNR2200
|
|
DEVICE_ALT0_VARIANT := CN/RU
|
|
NETGEAR_HW_ID :=
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += netgear_wnr2200-16m
|
|
|
|
define Device/ocedo_koala
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Koala
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
SUPPORTED_DEVICES += koala
|
|
IMAGE_SIZE := 14848k
|
|
endef
|
|
TARGET_DEVICES += ocedo_koala
|
|
|
|
define Device/ocedo_raccoon
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Raccoon
|
|
IMAGE_SIZE := 14848k
|
|
endef
|
|
TARGET_DEVICES += ocedo_raccoon
|
|
|
|
define Device/ocedo_ursus
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Ursus
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 14848k
|
|
endef
|
|
TARGET_DEVICES += ocedo_ursus
|
|
|
|
define Device/onion_omega
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Onion
|
|
DEVICE_MODEL := Omega
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
SUPPORTED_DEVICES += onion-omega
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGE_SIZE := 16192k
|
|
TPLINK_HWID := 0x04700001
|
|
endef
|
|
TARGET_DEVICES += onion_omega
|
|
|
|
define Device/openmesh_common_64k
|
|
DEVICE_VENDOR := OpenMesh
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
IMAGE_SIZE := 7808k
|
|
OPENMESH_CE_TYPE :=
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
|
|
pad-to $$(BLOCKSIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
|
openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
|
|
endef
|
|
|
|
define Device/openmesh_common_256k
|
|
DEVICE_VENDOR := OpenMesh
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
IMAGE_SIZE := 7168k
|
|
BLOCKSIZE := 256k
|
|
OPENMESH_CE_TYPE :=
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
|
|
pad-to $$(BLOCKSIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
|
openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
|
|
endef
|
|
|
|
define Device/openmesh_a40
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := A40
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
|
OPENMESH_CE_TYPE := A60
|
|
SUPPORTED_DEVICES += a40
|
|
endef
|
|
TARGET_DEVICES += openmesh_a40
|
|
|
|
define Device/openmesh_a60
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := A60
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
|
OPENMESH_CE_TYPE := A60
|
|
SUPPORTED_DEVICES += a60
|
|
endef
|
|
TARGET_DEVICES += openmesh_a60
|
|
|
|
define Device/openmesh_mr600-v1
|
|
$(Device/openmesh_common_64k)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := MR600
|
|
DEVICE_VARIANT := v1
|
|
OPENMESH_CE_TYPE := MR600
|
|
SUPPORTED_DEVICES += mr600
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr600-v1
|
|
|
|
define Device/openmesh_mr600-v2
|
|
$(Device/openmesh_common_64k)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := MR600
|
|
DEVICE_VARIANT := v2
|
|
OPENMESH_CE_TYPE := MR600
|
|
SUPPORTED_DEVICES += mr600v2
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr600-v2
|
|
|
|
define Device/openmesh_mr900-v1
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := MR900
|
|
DEVICE_VARIANT := v1
|
|
OPENMESH_CE_TYPE := MR900
|
|
SUPPORTED_DEVICES += mr900
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr900-v1
|
|
|
|
define Device/openmesh_mr900-v2
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := MR900
|
|
DEVICE_VARIANT := v2
|
|
OPENMESH_CE_TYPE := MR900
|
|
SUPPORTED_DEVICES += mr900v2
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr900-v2
|
|
|
|
define Device/openmesh_mr1750-v1
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := MR1750
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
OPENMESH_CE_TYPE := MR1750
|
|
SUPPORTED_DEVICES += mr1750
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr1750-v1
|
|
|
|
define Device/openmesh_mr1750-v2
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := MR1750
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
OPENMESH_CE_TYPE := MR1750
|
|
SUPPORTED_DEVICES += mr1750v2
|
|
endef
|
|
TARGET_DEVICES += openmesh_mr1750-v2
|
|
|
|
define Device/openmesh_om2p-v1
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar7240
|
|
DEVICE_MODEL := OM2P
|
|
DEVICE_VARIANT := v1
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-v1
|
|
|
|
define Device/openmesh_om2p-v2
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar9330
|
|
DEVICE_MODEL := OM2P
|
|
DEVICE_VARIANT := v2
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2pv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-v2
|
|
|
|
define Device/openmesh_om2p-v4
|
|
$(Device/openmesh_common_256k)
|
|
SOC := qca9533
|
|
DEVICE_MODEL := OM2P
|
|
DEVICE_VARIANT := v4
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2pv4
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-v4
|
|
|
|
define Device/openmesh_om2p-hs-v1
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar9341
|
|
DEVICE_MODEL := OM2P-HS
|
|
DEVICE_VARIANT := v1
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p-hs
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-hs-v1
|
|
|
|
define Device/openmesh_om2p-hs-v2
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar9341
|
|
DEVICE_MODEL := OM2P-HS
|
|
DEVICE_VARIANT := v2
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p-hsv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-hs-v2
|
|
|
|
define Device/openmesh_om2p-hs-v3
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar9341
|
|
DEVICE_MODEL := OM2P-HS
|
|
DEVICE_VARIANT := v3
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p-hsv3
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-hs-v3
|
|
|
|
define Device/openmesh_om2p-hs-v4
|
|
$(Device/openmesh_common_256k)
|
|
SOC := qca9533
|
|
DEVICE_MODEL := OM2P-HS
|
|
DEVICE_VARIANT := v4
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p-hsv4
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-hs-v4
|
|
|
|
define Device/openmesh_om2p-lc
|
|
$(Device/openmesh_common_256k)
|
|
SOC := ar9330
|
|
DEVICE_MODEL := OM2P-LC
|
|
OPENMESH_CE_TYPE := OM2P
|
|
SUPPORTED_DEVICES += om2p-lc
|
|
endef
|
|
TARGET_DEVICES += openmesh_om2p-lc
|
|
|
|
define Device/openmesh_om5p
|
|
$(Device/openmesh_common_64k)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := OM5P
|
|
OPENMESH_CE_TYPE := OM5P
|
|
SUPPORTED_DEVICES += om5p
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p
|
|
|
|
define Device/openmesh_om5p-ac-v1
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := OM5P-AC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
OPENMESH_CE_TYPE := OM5PAC
|
|
SUPPORTED_DEVICES += om5p-ac
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v1
|
|
|
|
define Device/openmesh_om5p-ac-v2
|
|
$(Device/openmesh_common_64k)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := OM5P-AC
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
OPENMESH_CE_TYPE := OM5PAC
|
|
SUPPORTED_DEVICES += om5p-acv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
|
|
|
define Device/openmesh_om5p-an
|
|
$(Device/openmesh_common_64k)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := OM5P-AN
|
|
OPENMESH_CE_TYPE := OM5P
|
|
SUPPORTED_DEVICES += om5p-an
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-an
|
|
|
|
define Device/pcs_cap324
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CAP324
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += cap324
|
|
endef
|
|
TARGET_DEVICES += pcs_cap324
|
|
|
|
define Device/pcs_cr3000
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CR3000
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += cr3000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr3000
|
|
|
|
define Device/pcs_cr5000
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CR5000
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += cr5000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr5000
|
|
|
|
define Device/phicomm_k2t
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := K2T
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2t
|
|
|
|
define Device/pisen_ts-d084
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := TS-D084
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
TPLINK_HWID := 0x07030101
|
|
endef
|
|
TARGET_DEVICES += pisen_ts-d084
|
|
|
|
define Device/pisen_wmb001n
|
|
$(Device/loader-okli-uimage)
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := WMB001N
|
|
IMAGE_SIZE := 14080k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-usb2
|
|
LOADER_FLASH_OFFS := 0x20000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n-factory $(1)
|
|
endef
|
|
TARGET_DEVICES += pisen_wmb001n
|
|
|
|
define Device/pisen_wmm003n
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := Cloud Easy Power (WMM003N)
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
TPLINK_HWID := 0x07030101
|
|
endef
|
|
TARGET_DEVICES += pisen_wmm003n
|
|
|
|
define Device/plasmacloud_pa300-common
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := Plasma Cloud
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
IMAGE_SIZE := 7168k
|
|
IMAGES += factory.bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/plasmacloud_pa300
|
|
$(Device/plasmacloud_pa300-common)
|
|
DEVICE_MODEL := PA300
|
|
endef
|
|
TARGET_DEVICES += plasmacloud_pa300
|
|
|
|
define Device/plasmacloud_pa300e
|
|
$(Device/plasmacloud_pa300-common)
|
|
DEVICE_MODEL := PA300E
|
|
endef
|
|
TARGET_DEVICES += plasmacloud_pa300e
|
|
|
|
define Device/qca_ap143
|
|
$(Device/loader-okli-uimage)
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := Qualcomm Atheros
|
|
DEVICE_MODEL := AP143
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += ap143
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
endef
|
|
|
|
define Device/qca_ap143-8m
|
|
$(Device/qca_ap143)
|
|
DEVICE_VARIANT := (8M)
|
|
IMAGE_SIZE := 7744k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | pad-to 6336k | \
|
|
append-loader-okli-uimage $(1) | pad-to 64k
|
|
endef
|
|
TARGET_DEVICES += qca_ap143-8m
|
|
|
|
define Device/qca_ap143-16m
|
|
$(Device/qca_ap143)
|
|
DEVICE_VARIANT := (16M)
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
|
|
append-loader-okli-uimage $(1) | pad-to 64k
|
|
endef
|
|
TARGET_DEVICES += qca_ap143-16m
|
|
|
|
define Device/qihoo_c301
|
|
$(Device/seama)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Qihoo
|
|
DEVICE_MODEL := C301
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \
|
|
uboot-envtools
|
|
IMAGE_SIZE := 15744k
|
|
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
|
|
SUPPORTED_DEVICES += qihoo-c301
|
|
endef
|
|
TARGET_DEVICES += qihoo_c301
|
|
|
|
define Device/qxwlan_e1700ac-v2
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E1700AC
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
SUPPORTED_DEVICES += e1700ac-v2
|
|
endef
|
|
|
|
define Device/qxwlan_e1700ac-v2-16m
|
|
$(Device/qxwlan_e1700ac-v2)
|
|
DEVICE_VARIANT := v2 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e1700ac-v2-16m
|
|
|
|
define Device/qxwlan_e1700ac-v2-8m
|
|
$(Device/qxwlan_e1700ac-v2)
|
|
DEVICE_VARIANT := v2 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e1700ac-v2-8m
|
|
|
|
define Device/qxwlan_e558-v2
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E558
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += e558-v2
|
|
endef
|
|
|
|
define Device/qxwlan_e558-v2-16m
|
|
$(Device/qxwlan_e558-v2)
|
|
DEVICE_VARIANT := v2 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e558-v2-16m
|
|
|
|
define Device/qxwlan_e558-v2-8m
|
|
$(Device/qxwlan_e558-v2)
|
|
DEVICE_VARIANT := v2 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e558-v2-8m
|
|
|
|
define Device/qxwlan_e600g-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E600G
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += e600g-v2
|
|
endef
|
|
|
|
define Device/qxwlan_e600g-v2-16m
|
|
$(Device/qxwlan_e600g-v2)
|
|
DEVICE_VARIANT := v2 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e600g-v2-16m
|
|
|
|
define Device/qxwlan_e600g-v2-8m
|
|
$(Device/qxwlan_e600g-v2)
|
|
DEVICE_VARIANT := v2 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e600g-v2-8m
|
|
|
|
define Device/qxwlan_e600gac-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E600GAC
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
SUPPORTED_DEVICES += e600gac-v2
|
|
endef
|
|
|
|
define Device/qxwlan_e600gac-v2-16m
|
|
$(Device/qxwlan_e600gac-v2)
|
|
DEVICE_VARIANT := v2 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e600gac-v2-16m
|
|
|
|
define Device/qxwlan_e600gac-v2-8m
|
|
$(Device/qxwlan_e600gac-v2)
|
|
DEVICE_VARIANT := v2 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e600gac-v2-8m
|
|
|
|
define Device/qxwlan_e750a-v4
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E750A
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += e750a-v4
|
|
endef
|
|
|
|
define Device/qxwlan_e750a-v4-16m
|
|
$(Device/qxwlan_e750a-v4)
|
|
DEVICE_VARIANT := v4 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e750a-v4-16m
|
|
|
|
define Device/qxwlan_e750a-v4-8m
|
|
$(Device/qxwlan_e750a-v4)
|
|
DEVICE_VARIANT := v4 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e750a-v4-8m
|
|
|
|
define Device/qxwlan_e750g-v8
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Qxwlan
|
|
DEVICE_MODEL := E750G
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += e750g-v8
|
|
endef
|
|
|
|
define Device/qxwlan_e750g-v8-16m
|
|
$(Device/qxwlan_e750g-v8)
|
|
DEVICE_VARIANT := v8 (16M)
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e750g-v8-16m
|
|
|
|
define Device/qxwlan_e750g-v8-8m
|
|
$(Device/qxwlan_e750g-v8)
|
|
DEVICE_VARIANT := v8 (8M)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += qxwlan_e750g-v8-8m
|
|
|
|
define Device/rosinson_wr818
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Rosinson
|
|
DEVICE_MODEL := WR818
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += rosinson_wr818
|
|
|
|
define Device/ruckus_common
|
|
DEVICE_VENDOR := Ruckus
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | uImage none
|
|
endef
|
|
|
|
define Device/ruckus_zf7025
|
|
$(Device/ruckus_common)
|
|
SOC := ar7240
|
|
DEVICE_MODEL := ZoneFlex 7025
|
|
IMAGE_SIZE := 15616k
|
|
BLOCKSIZE := 256k
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7025
|
|
|
|
define Device/ruckus_gd11_common
|
|
$(Device/ruckus_common)
|
|
SOC := ar7161
|
|
IMAGE_SIZE := 15616k
|
|
BLOCKSIZE := 256k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
|
|
endef
|
|
|
|
define Device/ruckus_zf7341
|
|
$(Device/ruckus_gd11_common)
|
|
DEVICE_MODEL := ZoneFlex 7341[-U]
|
|
DEVICE_PACKAGES += -swconfig
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7341
|
|
|
|
define Device/ruckus_zf7351
|
|
$(Device/ruckus_gd11_common)
|
|
DEVICE_MODEL := ZoneFlex 7351[-U]
|
|
DEVICE_PACKAGES += -swconfig
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7351
|
|
|
|
define Device/ruckus_zf7363
|
|
$(Device/ruckus_gd11_common)
|
|
DEVICE_MODEL := ZoneFlex 7363[-U]
|
|
DEVICE_ALT0_VENDOR := Ruckus
|
|
DEVICE_ALT0_MODEL := ZoneFlex 7343[-U]
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7363
|
|
|
|
define Device/ruckus_zf73xx_common
|
|
$(Device/ruckus_common)
|
|
DEVICE_PACKAGES := -swconfig kmod-usb2 kmod-usb-chipidea2
|
|
IMAGE_SIZE := 31744k
|
|
endef
|
|
|
|
define Device/ruckus_zf7321
|
|
$(Device/ruckus_zf73xx_common)
|
|
SOC := ar9342
|
|
DEVICE_MODEL := ZoneFlex 7321[-U]
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7321
|
|
|
|
define Device/ruckus_zf7372
|
|
$(Device/ruckus_zf73xx_common)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := ZoneFlex 7352/7372[-E/-U]
|
|
endef
|
|
TARGET_DEVICES += ruckus_zf7372
|
|
|
|
define Device/samsung_wam250
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Samsung
|
|
DEVICE_MODEL := WAM250
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += wam250
|
|
endef
|
|
TARGET_DEVICES += samsung_wam250
|
|
|
|
define Device/siemens_ws-ap3610
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Siemens
|
|
DEVICE_MODEL := WS-AP3610
|
|
IMAGE_SIZE := 14336k
|
|
BLOCKSIZE := 256k
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x82000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
|
|
endef
|
|
TARGET_DEVICES += siemens_ws-ap3610
|
|
|
|
define Device/sitecom_wlr-7100
|
|
SOC := ar1022
|
|
DEVICE_VENDOR := Sitecom
|
|
DEVICE_MODEL := WLR-7100
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers kmod-usb2
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x222 -p 0x53 -t 2
|
|
IMAGE_SIZE := 7488k
|
|
endef
|
|
TARGET_DEVICES += sitecom_wlr-7100
|
|
|
|
define Device/sitecom_wlr-8100
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sitecom
|
|
DEVICE_MODEL := WLR-8100
|
|
DEVICE_ALT0_VENDOR := Sitecom
|
|
DEVICE_ALT0_MODEL := X8 AC1750
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 kmod-usb3
|
|
SUPPORTED_DEVICES += wlr8100
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x222 -p 0x56 -t 2
|
|
IMAGE_SIZE := 15424k
|
|
endef
|
|
TARGET_DEVICES += sitecom_wlr-8100
|
|
|
|
define Device/sophos_ap15
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := AP15
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += sophos_ap15
|
|
|
|
define Device/sophos_ap55
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := AP55
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += sophos_ap55
|
|
|
|
define Device/sophos_ap55c
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := AP55C
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += sophos_ap55c
|
|
|
|
define Device/sophos_ap100
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := AP100
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += sophos_ap100
|
|
|
|
define Device/sophos_ap100c
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := AP100C
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += sophos_ap100c
|
|
|
|
define Device/telco_t1
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Telco
|
|
DEVICE_MODEL := T1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option uqmi -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
SUPPORTED_DEVICES += telco_electronics,tel-t1
|
|
endef
|
|
TARGET_DEVICES += telco_t1
|
|
|
|
define Device/teltonika_rut230-v1
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Teltonika
|
|
DEVICE_MODEL := RUT230
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-acm kmod-usb-net-qmi-wwan \
|
|
uqmi -uboot-envtools
|
|
IMAGE_SIZE := 15552k
|
|
TPLINK_HWID := 0x32200002
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
KERNEL := kernel-bin | append-dtb | lzma | teltonika-v1-header
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
|
|
pad-rootfs | pad-extra 64 | teltonika-fw-fake-checksum 54 | check-size
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata |\
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut230-v1
|
|
|
|
define Device/teltonika_rut300
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Teltonika
|
|
DEVICE_MODEL := RUT300
|
|
SUPPORTED_TELTONIKA_DEVICES := teltonika,rut30x
|
|
DEVICE_PACKAGES := -kmod-ath9k -uboot-envtools -wpad-basic-mbedtls kmod-usb2
|
|
IMAGE_SIZE := 15552k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata-teltonika | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut300
|
|
|
|
define Device/teltonika_rut955
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Teltonika
|
|
DEVICE_MODEL := RUT955
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option kmod-hwmon-mcp3021 uqmi -uboot-envtools
|
|
IMAGE_SIZE := 15552k
|
|
TPLINK_HWID := 0x35000001
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
|
|
pad-rootfs | teltonika-fw-fake-checksum 20 | append-string master |\
|
|
append-md5sum-bin | check-size
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut955
|
|
|
|
define Device/teltonika_rut955-h7v3c0
|
|
$(Device/teltonika_rut955)
|
|
DEVICE_VARIANT := H7V3C0
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut955-h7v3c0
|
|
|
|
define Device/trendnet_tew-673gru
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Trendnet
|
|
DEVICE_MODEL := TEW-673GRU
|
|
DEVICE_VARIANT := v1.0R
|
|
DEVICE_PACKAGES := -uboot-envtools kmod-usb-ohci kmod-usb2 \
|
|
kmod-owl-loader kmod-switch-rtl8366s
|
|
IMAGE_SIZE := 7808k
|
|
FACTORY_SIZE := 6144k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size $$$$(FACTORY_SIZE) | pad-to $$$$(FACTORY_SIZE) | \
|
|
append-string AP94-AR7161-RT-080619-01
|
|
endef
|
|
TARGET_DEVICES += trendnet_tew-673gru
|
|
|
|
define Device/trendnet_tew-823dru
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Trendnet
|
|
DEVICE_MODEL := TEW-823DRU
|
|
DEVICE_VARIANT := v1.0R
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
SUPPORTED_DEVICES += tew-823dru
|
|
IMAGE_SIZE := 15296k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00AP135AR9558-RT-131129-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
|
|
endef
|
|
TARGET_DEVICES += trendnet_tew-823dru
|
|
|
|
define Device/wallys_dr531
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := Wallys
|
|
DEVICE_MODEL := DR531
|
|
DEVICE_PACKAGES := kmod-usb2 rssileds
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += dr531
|
|
endef
|
|
TARGET_DEVICES += wallys_dr531
|
|
|
|
define Device/watchguard_ap100
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := WatchGuard
|
|
DEVICE_MODEL := AP100
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-ap100
|
|
WATCHGUARD_MAGIC := 82kdlzk2
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
|
|
check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
|
|
endef
|
|
TARGET_DEVICES += watchguard_ap100
|
|
|
|
define Device/watchguard_ap200
|
|
$(Device/senao_loader_okli)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := WatchGuard
|
|
DEVICE_MODEL := AP200
|
|
IMAGE_SIZE := 12096k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-ap200
|
|
WATCHGUARD_MAGIC := 82kdlzk2
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
|
|
check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
|
|
endef
|
|
TARGET_DEVICES += watchguard_ap200
|
|
|
|
define Device/watchguard_ap300
|
|
$(Device/senao_loader_okli)
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := WatchGuard
|
|
DEVICE_MODEL := AP300
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
|
|
IMAGE_SIZE := 11584k
|
|
LOADER_FLASH_OFFS := 0x220000
|
|
SENAO_IMGNAME := senao-ap300
|
|
WATCHGUARD_MAGIC := 82kdlzk2
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
|
|
check-size | senao-tar-gz $$$$(SENAO_IMGNAME) | watchguard-cksum $$$$(WATCHGUARD_MAGIC)
|
|
endef
|
|
TARGET_DEVICES += watchguard_ap300
|
|
|
|
define Device/wd_mynet-n600
|
|
$(Device/seama)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Western Digital
|
|
DEVICE_MODEL := My Net N600
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SEAMA_SIGNATURE := wrgnd16_wd_db600
|
|
SUPPORTED_DEVICES += mynet-n600
|
|
endef
|
|
TARGET_DEVICES += wd_mynet-n600
|
|
|
|
define Device/wd_mynet-n750
|
|
$(Device/seama)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Western Digital
|
|
DEVICE_MODEL := My Net N750
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SEAMA_SIGNATURE := wrgnd13_wd_av
|
|
SUPPORTED_DEVICES += mynet-n750
|
|
endef
|
|
TARGET_DEVICES += wd_mynet-n750
|
|
|
|
define Device/wd_mynet-wifi-rangeextender
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Western Digital
|
|
DEVICE_MODEL := My Net Wi-Fi Range Extender
|
|
DEVICE_PACKAGES := rssileds nvram -swconfig
|
|
IMAGE_SIZE := 7808k
|
|
ADDPATTERN_ID := mynet-rext
|
|
ADDPATTERN_VERSION := 1.00.01
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \
|
|
addpattern | append-metadata
|
|
SUPPORTED_DEVICES += mynet-rext
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += wd_mynet-wifi-rangeextender
|
|
|
|
define Device/winchannel_wb2000
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Winchannel
|
|
DEVICE_MODEL := WB2000
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += winchannel_wb2000
|
|
|
|
define Device/xiaomi_aiot-ac2350
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := AIoT AC2350
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9984-ct
|
|
IMAGE_SIZE := 14336k
|
|
endef
|
|
TARGET_DEVICES += xiaomi_aiot-ac2350
|
|
|
|
define Device/xiaomi_mi-router-4q
|
|
SOC := qca9561
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 4Q
|
|
IMAGE_SIZE := 14336k
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-4q
|
|
|
|
define Device/yuncore_a770
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := A770
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_a770
|
|
|
|
define Device/yuncore_a782
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := A782
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_a782
|
|
|
|
define Device/yuncore_a930
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := A930
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_a930
|
|
|
|
define Device/yuncore_xd3200
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := XD3200
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_xd3200
|
|
|
|
define Device/yuncore_xd4200
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := XD4200
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_xd4200
|
|
|
|
define Device/ziking_cpe46b
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := ZiKing
|
|
DEVICE_MODEL := CPE46B
|
|
IMAGE_SIZE := 8000k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += ziking_cpe46b
|
|
|
|
define Device/zbtlink_zbt-wd323
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := ZBT
|
|
DEVICE_MODEL := WD323
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
|
|
kmod-usb-serial-cp210x uqmi
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wd323
|
|
|
|
define Device/zyxel_nwa11xx
|
|
$(Device/loader-okli-uimage)
|
|
SOC := ar9342
|
|
DEVICE_VENDOR := ZyXEL
|
|
LOADER_FLASH_OFFS := 0x050000
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGE_SIZE := 8192k
|
|
IMAGES += factory-$$$$(ZYXEL_MODEL_STRING).bin
|
|
IMAGE/factory-$$$$(ZYXEL_MODEL_STRING).bin := \
|
|
append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | pad-to 8192k | check-size | zyxel-tar-bz2 \
|
|
vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin
|
|
endef
|
|
|
|
define Device/zyxel_nwa1100-nh
|
|
$(Device/zyxel_nwa11xx)
|
|
DEVICE_MODEL := NWA1100
|
|
DEVICE_VARIANT := NH
|
|
ZYXEL_MODEL_STRING := AASI
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa1100-nh
|
|
|
|
define Device/zyxel_nwa1121-ni
|
|
$(Device/zyxel_nwa11xx)
|
|
DEVICE_MODEL := NWA1121
|
|
DEVICE_VARIANT := NI
|
|
ZYXEL_MODEL_STRING := AABJ
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa1121-ni
|
|
|
|
define Device/zyxel_nwa1123-ac
|
|
$(Device/zyxel_nwa11xx)
|
|
DEVICE_MODEL := NWA1123
|
|
DEVICE_VARIANT := AC
|
|
ZYXEL_MODEL_STRING := AAOX
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa1123-ac
|
|
|
|
define Device/zyxel_nwa1123-ni
|
|
$(Device/zyxel_nwa11xx)
|
|
DEVICE_MODEL := NWA1123
|
|
DEVICE_VARIANT := NI
|
|
ZYXEL_MODEL_STRING := AAEO
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa1123-ni
|
|
|
|
define Device/zyxel_nbg6616
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NBG6616
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-rtc-pcf8563 \
|
|
kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15232k
|
|
RAS_BOARD := NBG6616
|
|
RAS_ROOTFS_SIZE := 14464k
|
|
RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | pad-to 64k | check-size | zyxel-ras-image
|
|
SUPPORTED_DEVICES += nbg6616
|
|
endef
|
|
TARGET_DEVICES += zyxel_nbg6616
|