mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
9ba9a91343
Current ar724x code does the reset only on single pci bus, and in case of qca9558 writes the wrong register (0x10 vs 0x0c). This change allows the reset of second pci bus, commonly used in Archer C7 devices, in case host controller is stuck in reset. If the resetting controller on boot can solve any other issue it can be enabled unconditionally by removing reset check before ar724x_pci_hw_init is called. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [refreshed to apply cleanly] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 76d870871cb12fc0c170e5fd23bce568adfaae6d)
121 lines
4.1 KiB
Diff
121 lines
4.1 KiB
Diff
--- a/arch/mips/ath79/common.c
|
|
+++ b/arch/mips/ath79/common.c
|
|
@@ -153,6 +153,24 @@ void ath79_device_reset_clear(u32 mask)
|
|
}
|
|
EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
|
|
|
|
+void ath79_device_reset2_clear(u32 mask)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 reg;
|
|
+ u32 t;
|
|
+
|
|
+ if (soc_is_qca955x())
|
|
+ reg = QCA955X_RESET_REG_RESET2_MODULE;
|
|
+ else
|
|
+ panic("Reset register not defined for this SOC");
|
|
+
|
|
+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
|
|
+ t = ath79_reset_rr(reg);
|
|
+ ath79_reset_wr(reg, t & ~mask);
|
|
+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
|
|
+}
|
|
+EXPORT_SYMBOL_GPL(ath79_device_reset2_clear);
|
|
+
|
|
u32 ath79_device_reset_get(u32 mask)
|
|
{
|
|
unsigned long flags;
|
|
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
|
|
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
|
|
@@ -411,6 +411,7 @@
|
|
#define QCA955X_PLL_CPU_CONFIG_REG 0x00
|
|
#define QCA955X_PLL_DDR_CONFIG_REG 0x04
|
|
#define QCA955X_PLL_CLK_CTRL_REG 0x08
|
|
+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
|
|
#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
|
|
#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
|
|
#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
|
|
@@ -565,6 +566,7 @@
|
|
#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
|
|
|
|
#define QCA955X_RESET_REG_RESET_MODULE 0x1c
|
|
+#define QCA955X_RESET_REG_RESET2_MODULE 0xc4
|
|
#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
|
|
#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
|
|
|
|
--- a/arch/mips/include/asm/mach-ath79/ath79.h
|
|
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
|
|
@@ -178,6 +178,7 @@ static inline u32 ath79_reset_rr(unsigne
|
|
|
|
void ath79_device_reset_set(u32 mask);
|
|
void ath79_device_reset_clear(u32 mask);
|
|
+void ath79_device_reset2_clear(u32 mask);
|
|
u32 ath79_device_reset_get(u32 mask);
|
|
|
|
void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
|
|
--- a/arch/mips/pci/pci-ar724x.c
|
|
+++ b/arch/mips/pci/pci-ar724x.c
|
|
@@ -335,18 +335,37 @@ static void ar724x_pci_hw_init(struct ar
|
|
int wait = 0;
|
|
|
|
/* deassert PCIe host controller and PCIe PHY reset */
|
|
- ath79_device_reset_clear(AR724X_RESET_PCIE);
|
|
- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
|
|
+ if (soc_is_qca955x()) {
|
|
+ ath79_device_reset_clear(QCA955X_RESET_PCIE);
|
|
+ mdelay(10);
|
|
+ ath79_device_reset_clear(QCA955X_RESET_PCIE_PHY);
|
|
+ mdelay(10);
|
|
+ ath79_device_reset2_clear(QCA955X_RESET_PCIE);
|
|
+ mdelay(10);
|
|
+ ath79_device_reset2_clear(QCA955X_RESET_PCIE_PHY);
|
|
+ mdelay(10);
|
|
+ } else {
|
|
+ ath79_device_reset_clear(AR724X_RESET_PCIE);
|
|
+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
|
|
+ }
|
|
|
|
/* remove the reset of the PCIE PLL */
|
|
- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
|
|
- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ if (!soc_is_qca955x()) {
|
|
+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
|
|
+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ }
|
|
|
|
/* deassert bypass for the PCIE PLL */
|
|
- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
|
|
- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ if (soc_is_qca955x()) {
|
|
+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
|
|
+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
|
|
+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
|
|
+ } else {
|
|
+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
|
|
+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ }
|
|
|
|
/* set PCIE Application Control to ready */
|
|
app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
|
|
@@ -422,8 +441,14 @@ static int ar724x_pci_probe(struct platf
|
|
* Do the full PCIE Root Complex Initialization Sequence if the PCIe
|
|
* host controller is in reset.
|
|
*/
|
|
- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
|
|
- ar724x_pci_hw_init(apc);
|
|
+ if (soc_is_qca955x()) {
|
|
+ if (ath79_reset_rr(QCA955X_RESET_REG_RESET_MODULE) & QCA955X_RESET_PCIE ||
|
|
+ ath79_reset_rr(QCA955X_RESET_REG_RESET2_MODULE) & QCA955X_RESET_PCIE)
|
|
+ ar724x_pci_hw_init(apc);
|
|
+ } else {
|
|
+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
|
|
+ ar724x_pci_hw_init(apc);
|
|
+ }
|
|
|
|
apc->link_up = ar724x_pci_check_link(apc);
|
|
if (!apc->link_up)
|