Samuele Longhi ba9c269e1e bmips: bcm6328: add support for D-Link DSL-2750B rev B1 ... The D-Link DSL-2750B rev B1 (AW4339U) is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. This ports the device from old target bcm63xx/generic to bmips/bcm6328. The hardware is the same of D-Link DSL-2740B rev F1 and DSL-2741B rev F1, plus a usb2 port. Hardware: - SoC: Broadcom BCM63281 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (Nanya NT5TU32M16DG) - Flash: 8 MB NOR (Macronix MX25L6406ENI-12G) - Ethernet LAN: 4x 100Mbit (Broadcom BCM63281) - Wifi 2.4 GHz: 802.11bgn (Atheros AR9287) - USB: 1x 2.0 - Buttons: 3x - LEDs: 10x - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Samuele Longhi <agave@dracaena.it>		2024-08-20 16:19:11 +02:00
..
bcm6318	bmips: drop kernel 6.1 support	2024-06-25 09:43:07 +02:00
bcm6328	bmips: bcm6328: add support for D-Link DSL-2750B rev B1	2024-08-20 16:19:11 +02:00
bcm6358	bmips: drop kernel 6.1 support	2024-06-25 09:43:07 +02:00
bcm6362	bmips: drop kernel 6.1 support	2024-06-25 09:43:07 +02:00
bcm6368	bmips: drop kernel 6.1 support	2024-06-25 09:43:07 +02:00
bcm63268	bmips: add support for Sagem F@ST3864OP	2024-06-26 19:28:13 +02:00
dts	bmips: bcm6328: add support for D-Link DSL-2750B rev B1	2024-08-20 16:19:11 +02:00
files	bmips: enet: restore netif_napi_add weight	2024-07-01 19:20:46 +02:00
image	bmips: bcm6328: add support for D-Link DSL-2750B rev B1	2024-08-20 16:19:11 +02:00
patches-6.6	generic: 6.6: add backported bmips CBR patches	2024-08-06 14:06:09 +02:00
profiles	bmips: add new target	2021-02-22 18:29:44 +01:00
Makefile	bmips: switch default kernel to 6.6	2024-06-25 09:40:49 +02:00
modules.mk	bmips: add LED kernel modules	2023-04-09 10:34:05 +02:00