openwrt/target/linux/ath79
Adrian Schmutzler bdbda30384 ath79: add support for TP-Link TL-WA860RE v1
This ports support for the TL-WA860RE v1 range extender from ar71xx
to ath79.

Specifications:
  Board: AP123 / AR9341 rev. 3
  Flash/RAM: 4/32 MiB
  CPU: 535 MHz
  WiFi: 2.4 GHz b/g/n
  Ethernet: 1 port (100M)
  Two external antennas

Flashing instructions:
  Upload the factory image via the vendor firmware upgrade option.

Recovery:
  Note that this device does not provide TFTP via ethernet like many
  other TP-Link devices do. You will have to open the case if you
  require recovery beyond failsafe.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Sebastian Knapp <sebastian4842@outlook.com>
(cherry picked from commit 385f4868bc)
2020-03-27 17:15:07 +01:00
..
base-files ath79: add support for TP-Link TL-WA860RE v1 2020-03-27 17:15:07 +01:00
dts ath79: add support for TP-Link TL-WA860RE v1 2020-03-27 17:15:07 +01:00
files ar71xx/ath79: ag71xx: dont fetch the same var again 2019-08-27 10:31:06 +02:00
generic ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
image ath79: add support for TP-Link TL-WA860RE v1 2020-03-27 17:15:07 +01:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.171 2020-02-24 14:20:14 +01:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
Makefile Revert "ath79: make target source-only" 2019-08-14 21:27:11 +02:00
modules.mk