mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
cddd459140
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
44 lines
1.7 KiB
Diff
44 lines
1.7 KiB
Diff
From 9507f517ac4080627515c31c937f45a4a58ccbe4 Mon Sep 17 00:00:00 2001
|
|
From: Alex Marginean <alexandru.marginean@nxp.com>
|
|
Date: Fri, 14 Feb 2020 17:28:26 +0000
|
|
Subject: [PATCH] LF-924: net/enetc: Set MAC Rx FIFO to recommended value
|
|
|
|
On LS1028A the MAC Rx FIFO defaults to value 2, which is too high and may
|
|
lead to Rx lock-up under traffic. Set it to 1 instead, as recommended by
|
|
the hardware team.
|
|
|
|
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
|
|
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
|
|
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
|
|
---
|
|
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 ++
|
|
drivers/net/ethernet/freescale/enetc/enetc_pf.c | 6 ++++++
|
|
2 files changed, 8 insertions(+)
|
|
|
|
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
|
|
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
|
|
@@ -224,6 +224,8 @@ enum enetc_bdr_type {TX, RX};
|
|
#define ENETC_PM0_MAXFRM 0x8014
|
|
#define ENETC_SET_TX_MTU(val) ((val) << 16)
|
|
#define ENETC_SET_MAXFRM(val) ((val) & 0xffff)
|
|
+#define ENETC_PM0_RX_FIFO 0x801c
|
|
+#define ENETC_PM0_RX_FIFO_VAL 1
|
|
|
|
#define ENETC_PM_IMDIO_BASE 0x8030
|
|
/* PCS registers */
|
|
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
|
|
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
|
|
@@ -536,6 +536,12 @@ static void enetc_configure_port_mac(str
|
|
enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
|
|
enetc_port_wr(hw, ENETC_PM1_IF_MODE, ENETC_PM0_IFM_XGMII);
|
|
}
|
|
+
|
|
+ /* on LS1028A the MAC Rx FIFO defaults to value 2, which is too high and
|
|
+ * may lead to Rx lock-up under traffic. Set it to 1 instead, as
|
|
+ * recommended by the hardware team.
|
|
+ */
|
|
+ enetc_port_wr(hw, ENETC_PM0_RX_FIFO, ENETC_PM0_RX_FIFO_VAL);
|
|
}
|
|
|
|
static void enetc_configure_port_pmac(struct enetc_hw *hw)
|