openwrt/target/linux/realtek/dts-5.10
Markus Stockhausen b2681e584c realtek: make DGS-1210 u-boot-env partition writeable
We are close to provide enduser friendly OpenWrt images for DGS-1210
switches that do not need serial console. Nevertheless a small bit is
missing. We cannot switch back to the vendor partition or initiate a
download of a vendor firmware image. To issue this from inside OpenWrt
we need write access to U-Boot environment.

Case 1: Switch back to secondary (vendor) image
> fw_setenv bootcmd run addargs\; bootm 0xb4e80000
> fw_setenv image /dev/mtdblock7
> reboot

Case 2: Issue D-Link Network Assistant based download on next reboot.
This is a combination of some vendor specific protocol (DDP) and a
TFTP download afterwards.
> fw_setenv bootstop on
> reboot

Allow these commands by opening up u-boot-env for write access.
Tested on DGS-1210-20.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-07-26 09:15:38 +02:00
..
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl838x.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl839x.dtsi realtek: fix node addresses for RTL839x 2022-02-20 16:23:55 +00:00
rtl930x.dtsi realtek: add sys-led disable pinctrl for rtl930x 2022-07-10 09:54:35 +02:00
rtl931x.dtsi realtek: add mux pinctrl for rtl931x 2022-07-10 09:54:35 +02:00
rtl8380_engenius_ews2910p.dts realtek: EnGenius EWS2910P: declare and hog the poe-enable GPIO 2022-07-02 11:50:47 +02:00
rtl8380_netgear_gigabit_1xx.dtsi realtek: make Netgear GS1xx u-boot env partition writable 2022-06-22 17:51:02 +02:00
rtl8380_netgear_gigabit_3xx.dtsi realtek: make "u-boot-env" partition writable for Netgear 3xx series 2022-06-22 17:52:30 +02:00
rtl8380_netgear_gigabit.dtsi realtek: add missing gpio0 pinctrl properties 2022-07-10 09:54:35 +02:00
rtl8380_netgear_gs108t-v3.dts realtek: add support for power LED on Netgear GS108Tv3 2022-06-19 10:58:40 +02:00
rtl8380_netgear_gs110tpp-v1.dts realtek: netgear-gs110tpp: Add system LEDs 2021-12-27 13:51:41 +01:00
rtl8380_netgear_gs308t-v1.dts realtek: add support for power LED on Netgear GS308Tv1 2022-06-18 09:21:50 +02:00
rtl8380_netgear_gs310tp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: add support for Panasonic Switch-M8eG PN28080K 2022-03-13 19:54:57 +01:00
rtl8380_zyxel_gs1900-8.dts realtek: copy dts directory for Kernel 5.10 2021-09-26 00:32:17 +02:00
rtl8380_zyxel_gs1900-8hp-v1.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-8hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900-10hp.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8380_zyxel_gs1900.dtsi realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_allnet_all-sg8208m.dts realtek: Consolidate bootargs 2021-11-24 21:42:44 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: move RTL8231 definitions to board files 2022-02-20 16:23:55 +00:00
rtl8382_d-link_dgs-1210-16.dts realtek: copy dts directory for Kernel 5.10 2021-09-26 00:32:17 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: add support for D-Link DGS-1210-20 2022-06-19 08:36:21 +02:00
rtl8382_d-link_dgs-1210-28.dts realtek: add gpio-restart for D-Link DGS-1210-28 2022-06-07 17:11:28 +02:00
rtl8382_d-link_dgs-1210.dtsi realtek: make DGS-1210 u-boot-env partition writeable 2022-07-26 09:15:38 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: add missing gpio0 pinctrl properties 2022-07-10 09:54:35 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: add support for I-O DATA BSH-G24MB 2022-03-07 21:44:53 +01:00
rtl8382_zyxel_gs1900-16.dts realtek: add support for ZyXEL GS1900-16 2022-05-07 17:23:45 +02:00
rtl8382_zyxel_gs1900-24-v1.dts realtek: add ZyXEL GS1900-24 v1 support 2022-03-13 19:24:13 +01:00
rtl8382_zyxel_gs1900-24e.dts realtek: add support for ZyXEL GS1900-24E 2022-06-06 10:30:50 +02:00
rtl8382_zyxel_gs1900-24hp-v1.dts realtek: add ZyXEL GS1900-24HP v1 support 2022-04-16 17:26:56 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts realtek: enable uart1 on the devices with PoE support in 5.10 2021-09-26 00:32:18 +02:00
rtl8393_zyxel_gs1900-48.dts realtek: ZyXEL GS1900-48: fix system LED polarity 2022-02-20 16:23:55 +00:00
rtl9302_zyxel_xgs1250-12.dts realtek: add system LED for ZyXEL XGS1250-12 2022-07-10 09:54:35 +02:00