mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
f8b0010dfb
Hardware specs:
SoC: Qualcomm IPQ8065 (dual core Cortex-A15)
RAM: 512 MB DDR3
Flash: 256 MB NAND, 32 MB NOR
WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz
Switch: QCA8337
Ethernet: 5x 10/100/1000 Mbit/s
USB: 1x USB 3.0 Type-A
Buttons: WPS, Reset
Power: 12 VDC, 2.5 A
Ethernet ports:
1x WAN: connected to eth2
4x LAN: connected via the switch to eth0 and eth1
(eth0 is disabled in OEM firmware)
MAC addresses (OEM and OpenWrt):
fw_env @ 0x00 d4🆎82:??:??:?a LAN (eth1)
fw_env @ 0x06 d4🆎82:??:??:?b WAN (eth2)
fw_env @ 0x0c d4🆎82:??:??:?c WLAN 2.4 GHz (ath1)
fw_env @ 0x12 d4🆎82:??:??:?d WLAN 5 GHz (ath0)
fw_env @ 0x18 d4🆎82:??:??:?e OEM usage unknown (eth0 in OpenWrt)
OID d4🆎82 is registered to:
ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US
More info:
https://openwrt.org/inbox/toh/arris/tr4400_v2
IMPORTANT:
This port requires moving the 'fw_env' partition prior to first boot to
consolidate 70% of the usable space in flash into a contiguous partition.
'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords.
Its contents must be copied to 'rootfs_1' prior to booting via initramfs.
Note that the stock 'fw_env' partition will be wiped during sysupgrade.
A writable 'stock_fw_env' partition pointing to the old, stock location
is included in the port to help rolling back this change if desired.
Installation:
- Requires serial access and a TFTP server.
- Fully boot stock, press ENTER, type in:
mtd erase /dev/mtd21
dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21
umount /config && ubidetach -m 23 && mtd erase /dev/mtd23
- Reboot and interrupt U-Boot by pressing a key, type in:
set mtdids 'nand0=nand0'
set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)'
set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm'
env save
- Setup TFTP server serving initramfs image as 'recovery.bin', type in:
set ipaddr 192.168.1.1
set serverip 192.168.1.2
tftpboot recovery.bin && bootm
- Use sysupgrade to install squashfs image.
This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
[add 5.15 changes for 0069-arm-boot-add-dts-files.patch]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
|
||
|---|---|---|
| .. | ||
| 082-ipq8064-dtsi-tweaks.patch | ||
| 083-ipq8064-dtsi-additions.patch | ||
| 084-ipq8064-v1.0-dtsi-cleanup.patch | ||
| 085-ipq8064-v1.0-dtsi-additions.patch | ||
| 086-ipq8064-fix-duplicate-node.patch | ||
| 093-drivers-cpufreq-qcom-cpufreq-nvmem-support-specific-.patch | ||
| 097-1-ipq806x-gcc-add-missing-clk-flag.patch | ||
| 097-2-ipq806x-lcc-add-missing-reset.patch | ||
| 097-3-clk-qcom-krait-add-missing-enable-disable.patch | ||
| 097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch | ||
| 098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch | ||
| 098-2-Documentation-cpufreq-add-qcom-krait-cpufreq-binding.patch | ||
| 098-3-add-fab-scaling-support-with-cpufreq.patch | ||
| 099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch | ||
| 099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch | ||
| 100-v5.11-dmaengine-qcom-add_ADM_driver.patch | ||
| 101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch | ||
| 101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch | ||
| 102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch | ||
| 103-ARM-dts-qcom-reduce-pci-IO-size-to-64K.patch | ||
| 104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch | ||
| 104-2-drivers-thermal-tsens-Don-t-hardcode-sensor-slope.patch | ||
| 104-3-drivers-thermal-tsens-Convert-msm8960-to-reg_field.patch | ||
| 104-4-drivers-thermal-tsens-Use-init_common-for-msm8960.patch | ||
| 104-5-drivers-thermal-tsens-Fix-bug-in-sensor-enable-for-m.patch | ||
| 104-6-drivers-thermal-tsens-Replace-custom-8960-apis-with-.patch | ||
| 104-7-drivers-thermal-tsens-Drop-unused-define-for-msm8960.patch | ||
| 104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch | ||
| 104-9-dt-bindings-thermal-tsens-Document-ipq8064-bindings.patch | ||
| 105-10-drivers-thermal-tsens-Fix-wrong-slope-on-msm-8960.patch | ||
| 107-1-thermal-qcom-tsens-init-debugfs-only-with-successful.patch | ||
| 107-2-thermal-qcom-tsens-simplify-debugfs-init-function.patch | ||
| 108-v5.14-net-stmmac-explicitly-deassert-gmac-ahb-reset.patch | ||
| 109-v5.15-arm-dts-qcom-add-ahb-reset-to-ipq806x-gmac.patch | ||
| 850-soc-add-qualcomm-syscon.patch | ||
| 900-arm-add-cmdline-override.patch | ||
| 0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch | ||
| 0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch | ||
| 0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch | ||
| 0065-arm-override-compiler-flags.patch | ||
| 0067-generic-Mangle-bootloader-s-kernel-arguments.patch | ||
| 0069-arm-boot-add-dts-files.patch | ||
| 0072-add-ipq806x-with-no-clocks.patch | ||