openwrt/target/linux/ipq806x/base-files/etc/board.d/05_compat-version
JinGen Lim b38d446ecd
ipq806x: add support for Fortinet FAP-421E
Hardware
--------

SoC:    Qualcomm IPQ8064
RAM:    235MB
Flash:  128MB NAND (Micron MT29F1G08ABBDAH4)
        32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2:  Qualcomm Atheros QCA9980
WLAN5:  Qualcomm Atheros QCA9980
ETH:    LAN1 - Atheros AR8035
        LAN2 - Atheros AR8033
USB:    USB-A, 2.0
LED:    Power (yellow/amber)
        LAN1 (yellow/amber)
        LAN2 (yellow/amber)
        WLAN2G (yellow)
        WLAN5G (yellow)
BTN:    Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage

MAC Address:    LAN1 (label) at APPSBL partition
                LAN2: label + 1
                WLAN2: label + 8
                WLAN5: label + 16

Installation
------------

Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack

`Hit any key to stop autoboot:  5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`

Once OpenWrt has booted, install the firmware through sysupgrade

Signed-off-by: JinGen Lim <openwrt@sn.sg>
2024-01-15 16:57:50 +01:00

47 lines
752 B
Bash

#!/bin/sh
#
# Copyright (C) 2020 OpenWrt.org
#
. /lib/functions.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$(board_name)" in
arris,tr4400-v2 |\
askey,rt4230w-rev6 |\
asrock,g10 |\
buffalo,wxr-2533dhp |\
compex,wpq864 |\
fortinet,fap-421e |\
nec,wg2600hp |\
nec,wg2600hp3 |\
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800 |\
netgear,xr450 |\
netgear,xr500 |\
nokia,ac400i |\
qcom,ipq8064-ap148 |\
qcom,ipq8064-ap161 |\
qcom,ipq8064-db149 |\
tplink,ad7200 |\
tplink,c2600 |\
tplink,vr2600v |\
zyxel,nbg6817 |\
asus,onhub |\
tplink,onhub)
ucidef_set_compat_version "1.1"
;;
linksys,ea7500-v1 |\
linksys,ea8500)
ucidef_set_compat_version "2.1"
;;
esac
board_config_flush
exit 0