openwrt/target/linux/ramips/image
Daniel Golle b38b5c4299 ramips: add support for MeiG SLT866 4G CPE
Hardware:
 - SoC: Mediatek MT7621 (MT7621AT)
 - Flash: 32 MiB SPI-NOR (Macronix MX25L25635E)
 - RAM: 128 MiB
 - Ethernet: Built-in, 2 x 1GbE
 - 3G/4G Modem: MEIG SLM828 (currently only supported with ModemManager)
 - SLIC: Si32185 (unsupported)
 - Power: 12V via barrel connector
 - Wifi 2.4GHz: Mediatek MT7603BE 802.11b/g/b
 - Wifi 5GHz: Mediatek MT7613BE 802.11ac/n/a
 - LEDs: 8x (7 controllable)
 - Buttons: 2x (RESET, WPS)

Installing OpenWrt:
 - sysupgrade image is compatible with vendor firmware.

Recovery:
 - Connect to any of the Ethernet ports, configure local IP:
   10.10.10.3/24 (or 192.168.10.19/24, depending on OEM)
 - Provide firmware file named 'mt7621.img' on TFTP server.
 - Hold down both, RESET and WPS, then power on the board.
 - Watch network traffic using tcpdump or wireshark in realtime to
   observe progress of device requesting firmware. Once download has
   completed, release both buttons and wait until firmware comes up.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit bc335f2967)
2023-11-13 00:58:08 +00:00
..
lzma-loader ramips: lzma-loader: Refactor loader 2023-04-29 22:32:27 +02:00
common-sercomm.mk ramips: add support for Sercomm S1500 devices 2023-07-02 15:19:34 +02:00
common-tp-link.mk ramips: add basic support for TP-Link EC330-G5u v1 2023-01-14 18:36:33 +01:00
Makefile image: add additional fields to Netgear encrypted image 2023-07-13 12:05:28 +01:00
mt76x8.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00
mt7620.mk ramips: fix Gigabit Ethernet port of the HiWiFi HC5861 2023-10-31 00:44:03 +01:00
mt7621.mk ramips: add support for MeiG SLT866 4G CPE 2023-11-13 00:58:08 +00:00
rt288x.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00
rt305x.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00
rt3883.mk treewide: Disable building 32M RAM devices 2023-05-21 01:08:22 +02:00