JinGen Lim b38d446ecd ipq806x: add support for Fortinet FAP-421E ... Hardware -------- SoC: Qualcomm IPQ8064 RAM: 235MB Flash: 128MB NAND (Micron MT29F1G08ABBDAH4) 32MB SPI-NOR (Spansion FL256SAIFRO) WLAN2: Qualcomm Atheros QCA9980 WLAN5: Qualcomm Atheros QCA9980 ETH: LAN1 - Atheros AR8035 LAN2 - Atheros AR8033 USB: USB-A, 2.0 LED: Power (yellow/amber) LAN1 (yellow/amber) LAN2 (yellow/amber) WLAN2G (yellow) WLAN5G (yellow) BTN: Reset Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage MAC Address: LAN1 (label) at APPSBL partition LAN2: label + 1 WLAN2: label + 8 WLAN5: label + 16 Installation ------------ Connect to the RJ45 console (TTL) Connect LAN1 to host, set host ip as 192.168.1.10 Start a tftp server to serve the initramfs image Open console connection (9600n8) Connect power through the DC jack `Hit any key to stop autoboot: 5`: press any key `Enter G,Q,or H:`: press `K` to access the hidden option `Enter password:`: `fap22b1!$` to access a limited u-boot console `(FAP) #`: `tftpboot your_initramfs_image_name.itb` `(FAP) #`: `bootm` Once OpenWrt has booted, install the firmware through sysupgrade Signed-off-by: JinGen Lim <openwrt@sn.sg>		2024-01-15 16:57:50 +01:00
..
preinit	ipq806x: move ASRock G10 fix mac preinit script to generic board.d script	2023-09-30 13:51:19 +02:00
upgrade	ipq806x: add support for Fortinet FAP-421E	2024-01-15 16:57:50 +01:00