mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
8384c6d796
Radxa ROCK 3C is a high-performance, low-cost SBC[1] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key connector(2230) or M.2 Extension board(2232/2260/2280) - SATA through the Radxa Penta SATA HAT - 1x Gigabit ethernet port(supports PoE with add-on PoE HAT) - WiFi6/BT5.4 (not supported yet on OpenWrt) - 1x USB 3.0 Type-A HOST port - 2x USB 2.0 Type-A HOST ports - 1x USB 2.0 Type-A OTG port - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3c Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
27 lines
893 B
Diff
27 lines
893 B
Diff
From 06f6dd4d607766a527e37529f2f3f90dd1464293 Mon Sep 17 00:00:00 2001
|
|
From: FUKAUMI Naoki <naoki@radxa.com>
|
|
Date: Sun, 23 Jun 2024 11:33:29 +0900
|
|
Subject: [PATCH] arm64: dts: rockchip: change spi-max-frequency for Radxa ROCK
|
|
3C
|
|
|
|
SPI NOR flash chip may vary, so use safe(lowest) spi-max-frequency.
|
|
|
|
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
|
|
Link: https://lore.kernel.org/r/20240623023329.1044-3-naoki@radxa.com
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
|
@@ -633,7 +633,7 @@
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0x0>;
|
|
- spi-max-frequency = <120000000>;
|
|
+ spi-max-frequency = <104000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
};
|