mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-18 21:28:02 +00:00
rockchip: add support for Radxa ROCK 3C
Radxa ROCK 3C is a high-performance, low-cost SBC[1] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB LPDDR4 RAM - eMMC connector - Micro SD Card slot - NVMe SSD through the M.2 M Key connector(2230) or M.2 Extension board(2232/2260/2280) - SATA through the Radxa Penta SATA HAT - 1x Gigabit ethernet port(supports PoE with add-on PoE HAT) - WiFi6/BT5.4 (not supported yet on OpenWrt) - 1x USB 3.0 Type-A HOST port - 2x USB 2.0 Type-A HOST ports - 1x USB 2.0 Type-A OTG port - 40 Pin GPIO header [1] https://radxa.com/products/rock3/3c Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
FUKAUMI Naoki
Hauke Mehrtens
parent
e231cdd0c6
commit
8384c6d796
@ -167,6 +167,13 @@ define U-Boot/radxa-cm3-io-rk3566
|
||||
radxa_cm3-io
|
||||
endef
|
||||
|
||||
define U-Boot/rock-3c-rk3566
|
||||
$(U-Boot/rk3566/Default)
|
||||
NAME:=ROCK 3C
|
||||
BUILD_DEVICES:= \
|
||||
radxa_rock-3c
|
||||
endef
|
||||
|
||||
# RK3568 boards
|
||||
|
||||
define U-Boot/rk3568/Default
|
||||
@ -270,6 +277,7 @@ UBOOT_TARGETS := \
|
||||
rock-pi-e-rk3328 \
|
||||
rock-pi-e-v3-rk3328 \
|
||||
radxa-cm3-io-rk3566 \
|
||||
rock-3c-rk3566 \
|
||||
bpi-r2-pro-rk3568 \
|
||||
nanopi-r5c-rk3568 \
|
||||
nanopi-r5s-rk3568 \
|
||||
|
||||
@ -765,3 +765,732 @@
|
||||
+&usb_host0_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
--- /dev/null
|
||||
+++ b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
|
||||
@@ -0,0 +1,726 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+#include <dt-bindings/pinctrl/rockchip.h>
|
||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
+#include "rk3566.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Radxa ROCK 3C";
|
||||
+ compatible = "radxa,rock-3c", "rockchip,rk3566";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &gmac1;
|
||||
+ mmc0 = &sdhci;
|
||||
+ mmc1 = &sdmmc0;
|
||||
+ mmc2 = &sdmmc1;
|
||||
+ };
|
||||
+
|
||||
+ chosen: chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ gmac1_clkin: external-gmac1-clock {
|
||||
+ compatible = "fixed-clock";
|
||||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "gmac1_clkin";
|
||||
+ #clock-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ hdmi-con {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_con_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_out_con>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led-0 {
|
||||
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
+ function = LED_FUNCTION_HEARTBEAT;
|
||||
+ color = <LED_COLOR_ID_BLUE>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&user_led2>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdio_pwrseq: sdio-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ clocks = <&rk809 1>;
|
||||
+ clock-names = "ext_clock";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_reg_on_h>;
|
||||
+ post-power-on-delay-ms = <100>;
|
||||
+ power-off-delay-us = <5000000>;
|
||||
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v_dcin: vcc5v-dcin-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v_dcin";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pcie_pwr_en>;
|
||||
+ regulator-name = "vcc3v3_pcie";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v0_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v_dcin>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
||||
+ regulator-name = "vcc5v0_usb30_host";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
+ regulator-name = "vcc5v0_usb_otg";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_cam: vcc-cam-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc_cam_en>;
|
||||
+ regulator-name = "vcc_cam";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_mipi: vcc-mipi-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc_mipi_en>;
|
||||
+ regulator-name = "vcc_mipi";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&combphy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&combphy2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&gmac1 {
|
||||
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||||
+ clock_in_out = "input";
|
||||
+ phy-handle = <&rgmii_phy1>;
|
||||
+ phy-mode = "rgmii-id";
|
||||
+ phy-supply = <&vcc_3v3>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac1m1_miim
|
||||
+ &gmac1m1_tx_bus2
|
||||
+ &gmac1m1_rx_bus2
|
||||
+ &gmac1m1_rgmii_clk
|
||||
+ &gmac1m1_rgmii_bus
|
||||
+ &gmac1m1_clkinout>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <&vdd_gpu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ avdd-0v9-supply = <&vdda0v9_image>;
|
||||
+ avdd-1v8-supply = <&vcca1v8_image>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_in {
|
||||
+ hdmi_in_vp0: endpoint {
|
||||
+ remote-endpoint = <&vp0_out_hdmi>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_out {
|
||||
+ hdmi_out_con: endpoint {
|
||||
+ remote-endpoint = <&hdmi_con_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_sound {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ vdd_cpu: regulator@1c {
|
||||
+ compatible = "tcs,tcs4525";
|
||||
+ reg = <0x1c>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ regulator-name = "vdd_cpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <800000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+ regulator-ramp-delay = <2300>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rk809: pmic@20 {
|
||||
+ compatible = "rockchip,rk809";
|
||||
+ reg = <0x20>;
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
||||
+ system-power-controller;
|
||||
+ vcc1-supply = <&vcc3v3_sys>;
|
||||
+ vcc2-supply = <&vcc3v3_sys>;
|
||||
+ vcc3-supply = <&vcc3v3_sys>;
|
||||
+ vcc4-supply = <&vcc3v3_sys>;
|
||||
+ vcc5-supply = <&vcc3v3_sys>;
|
||||
+ vcc6-supply = <&vcc3v3_sys>;
|
||||
+ vcc7-supply = <&vcc3v3_sys>;
|
||||
+ vcc8-supply = <&vcc3v3_sys>;
|
||||
+ vcc9-supply = <&vcc3v3_sys>;
|
||||
+ wakeup-source;
|
||||
+ #clock-cells = <1>;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_logic: DCDC_REG1 {
|
||||
+ regulator-name = "vdd_logic";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: DCDC_REG2 {
|
||||
+ regulator-name = "vdd_gpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_npu: DCDC_REG4 {
|
||||
+ regulator-name = "vdd_npu";
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: DCDC_REG5 {
|
||||
+ regulator-name = "vcc_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_image: LDO_REG1 {
|
||||
+ regulator-name = "vdda0v9_image";
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda_0v9: LDO_REG2 {
|
||||
+ regulator-name = "vdda_0v9";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_pmu: LDO_REG3 {
|
||||
+ regulator-name = "vdda0v9_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_acodec: LDO_REG4 {
|
||||
+ regulator-name = "vccio_acodec";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_sd: LDO_REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pmu: LDO_REG6 {
|
||||
+ regulator-name = "vcc3v3_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca_1v8: LDO_REG7 {
|
||||
+ regulator-name = "vcca_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_pmu: LDO_REG8 {
|
||||
+ regulator-name = "vcca1v8_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_image: LDO_REG9 {
|
||||
+ regulator-name = "vcca1v8_image";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: SWITCH_REG1 {
|
||||
+ regulator-name = "vcc_3v3";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sd: SWITCH_REG2 {
|
||||
+ regulator-name = "vcc3v3_sd";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ eeprom: eeprom@50 {
|
||||
+ compatible = "belling,bl24c16a", "atmel,24c16";
|
||||
+ reg = <0x50>;
|
||||
+ pagesize = <16>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2s0_8ch {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2s1_8ch {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
+ rockchip,trcm-sync-tx-only;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio1 {
|
||||
+ rgmii_phy1: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0x1>;
|
||||
+ reset-assert-us = <20000>;
|
||||
+ reset-deassert-us = <100000>;
|
||||
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie2x1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pcie_reset_h>;
|
||||
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ bluetooth {
|
||||
+ bt_reg_on_h: bt-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_wake_host_h: bt-wake-host-h {
|
||||
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_host_wake_h: bt-host-wake-h {
|
||||
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ cam {
|
||||
+ vcc_cam_en: vcc_cam_en {
|
||||
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ display {
|
||||
+ vcc_mipi_en: vcc_mipi_en {
|
||||
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ user_led2: user-led2 {
|
||||
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie {
|
||||
+ pcie_pwr_en: pcie-pwr-en {
|
||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ pcie_reset_h: pcie-reset-h {
|
||||
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pmic {
|
||||
+ pmic_int_l: pmic-int-l {
|
||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ usb {
|
||||
+ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
||||
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
||||
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wifi {
|
||||
+ wifi_host_wake_h: wifi-host-wake-h {
|
||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_reg_on_h: wifi-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pmu_io_domains {
|
||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||||
+ pmuio2-supply = <&vcca1v8_pmu>;
|
||||
+ vccio1-supply = <&vccio_acodec>;
|
||||
+ vccio2-supply = <&vcc_1v8>;
|
||||
+ vccio3-supply = <&vccio_sd>;
|
||||
+ vccio4-supply = <&vcca1v8_pmu>;
|
||||
+ vccio5-supply = <&vcc_3v3>;
|
||||
+ vccio6-supply = <&vcc_3v3>;
|
||||
+ vccio7-supply = <&vcc_3v3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ vref-supply = <&vcca_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdhci {
|
||||
+ bus-width = <8>;
|
||||
+ max-frequency = <200000000>;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&vcc_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc0 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
+ sd-uhs-sdr50;
|
||||
+ vmmc-supply = <&vcc3v3_sys>;
|
||||
+ vqmmc-supply = <&vccio_sd>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc1 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ cap-sdio-irq;
|
||||
+ keep-power-in-suspend;
|
||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc3v3_sys>;
|
||||
+ vqmmc-supply = <&vcca1v8_pmu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sfc {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ flash@0 {
|
||||
+ compatible = "jedec,spi-nor";
|
||||
+ reg = <0x0>;
|
||||
+ spi-max-frequency = <104000000>;
|
||||
+ spi-rx-bus-width = <4>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ rockchip,hw-tshut-mode = <1>;
|
||||
+ rockchip,hw-tshut-polarity = <0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_xhci {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_xhci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_host {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_otg {
|
||||
+ phy-supply = <&vcc5v0_usb_otg>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1_host {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1_otg {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop {
|
||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vp0 {
|
||||
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
+ remote-endpoint = <&hdmi_in_vp0>;
|
||||
+ };
|
||||
+};
|
||||
|
||||
@ -0,0 +1,178 @@
|
||||
From e6e82ce24d4e9d20c232db2a95b2d10faf8f2bcf Mon Sep 17 00:00:00 2001
|
||||
From: Maxim Moskalets <maximmosk4@gmail.com>
|
||||
Date: Thu, 8 Aug 2024 22:37:10 +0300
|
||||
Subject: [PATCH] board: rockchip: add Radxa ROCK 3 Model C
|
||||
|
||||
Based on rock-3a-rk3568_defconfig.
|
||||
Tested on v1.31 revision.
|
||||
|
||||
Board Specifications:
|
||||
- Rockchip RK3566
|
||||
- 1/2/4GB LPDDR4 2112MT/s
|
||||
- eMMC socket
|
||||
- uSD card slot
|
||||
- M.2 2230 Connector
|
||||
- GbE LAN with POE
|
||||
- 3.5mm jack with mic
|
||||
- HDMI 2.0, MIPI DSI/CSI
|
||||
- USB 3.0 Host, USB 2.0 Host/OTG
|
||||
- 40-pin GPIO expansion ports
|
||||
|
||||
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
|
||||
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
|
||||
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
|
||||
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
|
||||
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
||||
---
|
||||
arch/arm/dts/rk3566-rock-3c-u-boot.dtsi | 18 +++++
|
||||
board/rockchip/evb_rk3568/MAINTAINERS | 7 ++
|
||||
configs/rock-3c-rk3566_defconfig | 97 +++++++++++++++++++++++++
|
||||
doc/board/rockchip/rockchip.rst | 1 +
|
||||
4 files changed, 123 insertions(+)
|
||||
create mode 100644 arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
|
||||
create mode 100644 configs/rock-3c-rk3566_defconfig
|
||||
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
|
||||
@@ -0,0 +1,18 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+#include "rk356x-u-boot.dtsi"
|
||||
+
|
||||
+&sfc {
|
||||
+ flash@0 {
|
||||
+ bootph-pre-ram;
|
||||
+ bootph-some-ram;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/ {
|
||||
+ leds {
|
||||
+ led-0 {
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
--- a/board/rockchip/evb_rk3568/MAINTAINERS
|
||||
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
|
||||
@@ -69,3 +69,10 @@ S: Maintained
|
||||
F: configs/rock-3a-rk3568_defconfig
|
||||
F: arch/arm/dts/rk3568-rock-3a.dts
|
||||
F: arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
|
||||
+
|
||||
+ROCK-3C
|
||||
+M: Jonas Karlman <jonas@kwiboo.se>
|
||||
+M: Maxim Moskalets <maximmosk4@gmail.com>
|
||||
+S: Maintained
|
||||
+F: arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
|
||||
+F: configs/rock-3c-rk3566_defconfig
|
||||
--- /dev/null
|
||||
+++ b/configs/rock-3c-rk3566_defconfig
|
||||
@@ -0,0 +1,97 @@
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
+CONFIG_COUNTER_FREQUENCY=24000000
|
||||
+CONFIG_ARCH_ROCKCHIP=y
|
||||
+CONFIG_SF_DEFAULT_SPEED=24000000
|
||||
+CONFIG_SF_DEFAULT_MODE=0x2000
|
||||
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
|
||||
+CONFIG_ROCKCHIP_RK3568=y
|
||||
+CONFIG_ROCKCHIP_SPI_IMAGE=y
|
||||
+CONFIG_SPL_SERIAL=y
|
||||
+CONFIG_DEBUG_UART_BASE=0xFE660000
|
||||
+CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
+CONFIG_SPL_SPI=y
|
||||
+CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
+CONFIG_PCI=y
|
||||
+CONFIG_DEBUG_UART=y
|
||||
+CONFIG_AHCI=y
|
||||
+CONFIG_FIT=y
|
||||
+CONFIG_FIT_VERBOSE=y
|
||||
+CONFIG_SPL_FIT_SIGNATURE=y
|
||||
+CONFIG_SPL_LOAD_FIT=y
|
||||
+CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-rock-3c.dtb"
|
||||
+# CONFIG_DISPLAY_CPUINFO is not set
|
||||
+CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
+CONFIG_SPL_MAX_SIZE=0x40000
|
||||
+CONFIG_SPL_PAD_TO=0x7f8000
|
||||
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
+CONFIG_SPL_SPI_LOAD=y
|
||||
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
|
||||
+CONFIG_SPL_ATF=y
|
||||
+CONFIG_CMD_GPIO=y
|
||||
+CONFIG_CMD_GPT=y
|
||||
+CONFIG_CMD_I2C=y
|
||||
+CONFIG_CMD_MMC=y
|
||||
+CONFIG_CMD_PCI=y
|
||||
+CONFIG_CMD_POWEROFF=y
|
||||
+CONFIG_CMD_USB=y
|
||||
+# CONFIG_CMD_SETEXPR is not set
|
||||
+CONFIG_CMD_PMIC=y
|
||||
+CONFIG_CMD_REGULATOR=y
|
||||
+# CONFIG_SPL_DOS_PARTITION is not set
|
||||
+CONFIG_SPL_OF_CONTROL=y
|
||||
+CONFIG_OF_LIVE=y
|
||||
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
+CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
+CONFIG_SPL_REGMAP=y
|
||||
+CONFIG_SPL_SYSCON=y
|
||||
+CONFIG_SCSI_AHCI=y
|
||||
+CONFIG_AHCI_PCI=y
|
||||
+CONFIG_SPL_CLK=y
|
||||
+CONFIG_ROCKCHIP_GPIO=y
|
||||
+CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
+CONFIG_LED=y
|
||||
+CONFIG_LED_GPIO=y
|
||||
+CONFIG_MISC=y
|
||||
+CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
+CONFIG_MMC_DW=y
|
||||
+CONFIG_MMC_DW_ROCKCHIP=y
|
||||
+CONFIG_MMC_SDHCI=y
|
||||
+CONFIG_MMC_SDHCI_SDMA=y
|
||||
+CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
+CONFIG_SF_DEFAULT_BUS=4
|
||||
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
+CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
+CONFIG_SPI_FLASH_MACRONIX=y
|
||||
+CONFIG_SPI_FLASH_WINBOND=y
|
||||
+CONFIG_SPI_FLASH_XTX=y
|
||||
+CONFIG_PHY_REALTEK=y
|
||||
+CONFIG_DWC_ETH_QOS=y
|
||||
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
|
||||
+CONFIG_NVME_PCI=y
|
||||
+CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
+CONFIG_SPL_PINCTRL=y
|
||||
+CONFIG_DM_PMIC=y
|
||||
+CONFIG_PMIC_RK8XX=y
|
||||
+CONFIG_REGULATOR_RK8XX=y
|
||||
+CONFIG_SPL_RAM=y
|
||||
+CONFIG_SCSI=y
|
||||
+CONFIG_BAUDRATE=1500000
|
||||
+CONFIG_DEBUG_UART_SHIFT=2
|
||||
+CONFIG_SYS_NS16550_MEM32=y
|
||||
+CONFIG_ROCKCHIP_SFC=y
|
||||
+CONFIG_SYSRESET=y
|
||||
+CONFIG_USB=y
|
||||
+CONFIG_USB_XHCI_HCD=y
|
||||
+CONFIG_USB_EHCI_HCD=y
|
||||
+CONFIG_USB_EHCI_GENERIC=y
|
||||
+CONFIG_USB_OHCI_HCD=y
|
||||
+CONFIG_USB_OHCI_GENERIC=y
|
||||
+CONFIG_USB_DWC3=y
|
||||
+CONFIG_USB_DWC3_GENERIC=y
|
||||
+CONFIG_ERRNO_STR=y
|
||||
--- a/doc/board/rockchip/rockchip.rst
|
||||
+++ b/doc/board/rockchip/rockchip.rst
|
||||
@@ -106,6 +106,7 @@ List of mainline supported Rockchip boar
|
||||
- Pine64 SOQuartz on Model A (soquartz-model-a-rk3566)
|
||||
- Powkiddy X55 (powkiddy-x55-rk3566)
|
||||
- Radxa CM3 IO Board (radxa-cm3-io-rk3566)
|
||||
+ - Radxa ROCK 3C (rock-3c-rk3566)
|
||||
|
||||
* rk3568
|
||||
- Rockchip Evb-RK3568 (evb-rk3568)
|
||||
@ -140,6 +140,14 @@ define Device/radxa_rock-3a
|
||||
endef
|
||||
TARGET_DEVICES += radxa_rock-3a
|
||||
|
||||
define Device/radxa_rock-3c
|
||||
DEVICE_VENDOR := Radxa
|
||||
DEVICE_MODEL := ROCK 3C
|
||||
SOC := rk3566
|
||||
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
|
||||
endef
|
||||
TARGET_DEVICES += radxa_rock-3c
|
||||
|
||||
define Device/radxa_rock-5a
|
||||
DEVICE_VENDOR := Radxa
|
||||
DEVICE_MODEL := ROCK 5A
|
||||
|
||||
@ -0,0 +1,769 @@
|
||||
From ee219017ddb50be14c60d3cbe3e51ac0b2008d40 Mon Sep 17 00:00:00 2001
|
||||
From: Chukun Pan <amadeus@jmu.edu.cn>
|
||||
Date: Sun, 28 Apr 2024 20:36:18 +0800
|
||||
Subject: [PATCH] arm64: dts: rockchip: Add Radxa ROCK 3C
|
||||
|
||||
The Radxa ROCK 3C is a development board with the
|
||||
Rockchip RK3566 SoC. It has the following features:
|
||||
|
||||
- 1/2/4GB LPDDR4
|
||||
- 1x HDMI Type A
|
||||
- 1x PCIE 2.0 slot
|
||||
- 1x FAN connector
|
||||
- 3.5mm jack with mic
|
||||
- 1GbE RTL8211F Ethernet
|
||||
- 1x USB 3.0, 3x USB 2.0
|
||||
- 40-pin expansion header
|
||||
- MicroSD card/eMMC socket
|
||||
- 16MB SPI NOR (gd25lq128d)
|
||||
- AP6256 or AIC8800 WiFi/BT
|
||||
|
||||
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
|
||||
Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn
|
||||
[dropped rk809-sound and not specified pmic sound properties]
|
||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
||||
.../boot/dts/rockchip/rk3566-rock-3c.dts | 726 ++++++++++++++++++
|
||||
2 files changed, 727 insertions(+)
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-qu
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
@@ -0,0 +1,726 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+#include <dt-bindings/pinctrl/rockchip.h>
|
||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
+#include "rk3566.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Radxa ROCK 3C";
|
||||
+ compatible = "radxa,rock-3c", "rockchip,rk3566";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &gmac1;
|
||||
+ mmc0 = &sdhci;
|
||||
+ mmc1 = &sdmmc0;
|
||||
+ mmc2 = &sdmmc1;
|
||||
+ };
|
||||
+
|
||||
+ chosen: chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ gmac1_clkin: external-gmac1-clock {
|
||||
+ compatible = "fixed-clock";
|
||||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "gmac1_clkin";
|
||||
+ #clock-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+ hdmi-con {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_con_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_out_con>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led-0 {
|
||||
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
+ function = LED_FUNCTION_HEARTBEAT;
|
||||
+ color = <LED_COLOR_ID_BLUE>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&user_led2>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ sdio_pwrseq: sdio-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ clocks = <&rk809 1>;
|
||||
+ clock-names = "ext_clock";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_reg_on_h>;
|
||||
+ post-power-on-delay-ms = <100>;
|
||||
+ power-off-delay-us = <5000000>;
|
||||
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v_dcin: vcc5v-dcin-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v_dcin";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pcie_pwr_en>;
|
||||
+ regulator-name = "vcc3v3_pcie";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v0_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v_dcin>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
||||
+ regulator-name = "vcc5v0_usb30_host";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
+ regulator-name = "vcc5v0_usb_otg";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_cam: vcc-cam-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc_cam_en>;
|
||||
+ regulator-name = "vcc_cam";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_mipi: vcc-mipi-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vcc_mipi_en>;
|
||||
+ regulator-name = "vcc_mipi";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&combphy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&combphy2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&gmac1 {
|
||||
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||||
+ clock_in_out = "input";
|
||||
+ phy-handle = <&rgmii_phy1>;
|
||||
+ phy-mode = "rgmii-id";
|
||||
+ phy-supply = <&vcc_3v3>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac1m1_miim
|
||||
+ &gmac1m1_tx_bus2
|
||||
+ &gmac1m1_rx_bus2
|
||||
+ &gmac1m1_rgmii_clk
|
||||
+ &gmac1m1_rgmii_bus
|
||||
+ &gmac1m1_clkinout>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <&vdd_gpu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ avdd-0v9-supply = <&vdda0v9_image>;
|
||||
+ avdd-1v8-supply = <&vcca1v8_image>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_in {
|
||||
+ hdmi_in_vp0: endpoint {
|
||||
+ remote-endpoint = <&vp0_out_hdmi>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_out {
|
||||
+ hdmi_out_con: endpoint {
|
||||
+ remote-endpoint = <&hdmi_con_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_sound {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ vdd_cpu: regulator@1c {
|
||||
+ compatible = "tcs,tcs4525";
|
||||
+ reg = <0x1c>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ regulator-name = "vdd_cpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <800000>;
|
||||
+ regulator-max-microvolt = <1150000>;
|
||||
+ regulator-ramp-delay = <2300>;
|
||||
+ vin-supply = <&vcc5v0_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ rk809: pmic@20 {
|
||||
+ compatible = "rockchip,rk809";
|
||||
+ reg = <0x20>;
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
||||
+ system-power-controller;
|
||||
+ vcc1-supply = <&vcc3v3_sys>;
|
||||
+ vcc2-supply = <&vcc3v3_sys>;
|
||||
+ vcc3-supply = <&vcc3v3_sys>;
|
||||
+ vcc4-supply = <&vcc3v3_sys>;
|
||||
+ vcc5-supply = <&vcc3v3_sys>;
|
||||
+ vcc6-supply = <&vcc3v3_sys>;
|
||||
+ vcc7-supply = <&vcc3v3_sys>;
|
||||
+ vcc8-supply = <&vcc3v3_sys>;
|
||||
+ vcc9-supply = <&vcc3v3_sys>;
|
||||
+ wakeup-source;
|
||||
+ #clock-cells = <1>;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_logic: DCDC_REG1 {
|
||||
+ regulator-name = "vdd_logic";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: DCDC_REG2 {
|
||||
+ regulator-name = "vdd_gpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_npu: DCDC_REG4 {
|
||||
+ regulator-name = "vdd_npu";
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: DCDC_REG5 {
|
||||
+ regulator-name = "vcc_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_image: LDO_REG1 {
|
||||
+ regulator-name = "vdda0v9_image";
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda_0v9: LDO_REG2 {
|
||||
+ regulator-name = "vdda_0v9";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_pmu: LDO_REG3 {
|
||||
+ regulator-name = "vdda0v9_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_acodec: LDO_REG4 {
|
||||
+ regulator-name = "vccio_acodec";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_sd: LDO_REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pmu: LDO_REG6 {
|
||||
+ regulator-name = "vcc3v3_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca_1v8: LDO_REG7 {
|
||||
+ regulator-name = "vcca_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_pmu: LDO_REG8 {
|
||||
+ regulator-name = "vcca1v8_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_image: LDO_REG9 {
|
||||
+ regulator-name = "vcca1v8_image";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: SWITCH_REG1 {
|
||||
+ regulator-name = "vcc_3v3";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sd: SWITCH_REG2 {
|
||||
+ regulator-name = "vcc3v3_sd";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ eeprom: eeprom@50 {
|
||||
+ compatible = "belling,bl24c16a", "atmel,24c16";
|
||||
+ reg = <0x50>;
|
||||
+ pagesize = <16>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2s0_8ch {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2s1_8ch {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
+ rockchip,trcm-sync-tx-only;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio1 {
|
||||
+ rgmii_phy1: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0x1>;
|
||||
+ reset-assert-us = <20000>;
|
||||
+ reset-deassert-us = <100000>;
|
||||
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pcie2x1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pcie_reset_h>;
|
||||
+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ bluetooth {
|
||||
+ bt_reg_on_h: bt-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_wake_host_h: bt-wake-host-h {
|
||||
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_host_wake_h: bt-host-wake-h {
|
||||
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ cam {
|
||||
+ vcc_cam_en: vcc_cam_en {
|
||||
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ display {
|
||||
+ vcc_mipi_en: vcc_mipi_en {
|
||||
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ user_led2: user-led2 {
|
||||
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie {
|
||||
+ pcie_pwr_en: pcie-pwr-en {
|
||||
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ pcie_reset_h: pcie-reset-h {
|
||||
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pmic {
|
||||
+ pmic_int_l: pmic-int-l {
|
||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ usb {
|
||||
+ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
||||
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
||||
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wifi {
|
||||
+ wifi_host_wake_h: wifi-host-wake-h {
|
||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_reg_on_h: wifi-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pmu_io_domains {
|
||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||||
+ pmuio2-supply = <&vcca1v8_pmu>;
|
||||
+ vccio1-supply = <&vccio_acodec>;
|
||||
+ vccio2-supply = <&vcc_1v8>;
|
||||
+ vccio3-supply = <&vccio_sd>;
|
||||
+ vccio4-supply = <&vcca1v8_pmu>;
|
||||
+ vccio5-supply = <&vcc_3v3>;
|
||||
+ vccio6-supply = <&vcc_3v3>;
|
||||
+ vccio7-supply = <&vcc_3v3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ vref-supply = <&vcca_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdhci {
|
||||
+ bus-width = <8>;
|
||||
+ max-frequency = <200000000>;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&vcc_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc0 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
+ sd-uhs-sdr50;
|
||||
+ vmmc-supply = <&vcc3v3_sys>;
|
||||
+ vqmmc-supply = <&vccio_sd>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc1 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ cap-sdio-irq;
|
||||
+ keep-power-in-suspend;
|
||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc3v3_sys>;
|
||||
+ vqmmc-supply = <&vcca1v8_pmu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sfc {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ flash@0 {
|
||||
+ compatible = "jedec,spi-nor";
|
||||
+ reg = <0x0>;
|
||||
+ spi-max-frequency = <120000000>;
|
||||
+ spi-rx-bus-width = <4>;
|
||||
+ spi-tx-bus-width = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ rockchip,hw-tshut-mode = <1>;
|
||||
+ rockchip,hw-tshut-polarity = <0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_xhci {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ehci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_ohci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_xhci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_host {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_otg {
|
||||
+ phy-supply = <&vcc5v0_usb_otg>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1_host {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy1_otg {
|
||||
+ phy-supply = <&vcc5v0_usb30_host>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop {
|
||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vp0 {
|
||||
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
+ remote-endpoint = <&hdmi_in_vp0>;
|
||||
+ };
|
||||
+};
|
||||
@ -0,0 +1,26 @@
|
||||
From 06f6dd4d607766a527e37529f2f3f90dd1464293 Mon Sep 17 00:00:00 2001
|
||||
From: FUKAUMI Naoki <naoki@radxa.com>
|
||||
Date: Sun, 23 Jun 2024 11:33:29 +0900
|
||||
Subject: [PATCH] arm64: dts: rockchip: change spi-max-frequency for Radxa ROCK
|
||||
3C
|
||||
|
||||
SPI NOR flash chip may vary, so use safe(lowest) spi-max-frequency.
|
||||
|
||||
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
|
||||
Link: https://lore.kernel.org/r/20240623023329.1044-3-naoki@radxa.com
|
||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
@@ -633,7 +633,7 @@
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
- spi-max-frequency = <120000000>;
|
||||
+ spi-max-frequency = <104000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
@ -17,7 +17,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -104,4 +104,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
|
||||
@@ -105,4 +105,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
|
||||
@ -0,0 +1,29 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
||||
@@ -16,6 +16,10 @@
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc1;
|
||||
+ led-boot = &led_blue;
|
||||
+ led-failsafe = &led_blue;
|
||||
+ led-running = &led_blue;
|
||||
+ led-upgrade = &led_blue;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
@@ -43,11 +47,11 @@
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
- led-0 {
|
||||
- gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
- function = LED_FUNCTION_HEARTBEAT;
|
||||
+ led_blue: led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
- linux,default-trigger = "heartbeat";
|
||||
+ default-state = "on";
|
||||
+ function = LED_FUNCTION_HEARTBEAT;
|
||||
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led2>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user