openwrt/target/linux/ramips/dts
Piotr Dymacz 71469caa0a ramips: add support for ALFA Network Quad-E4G
ALFA Network Quad-E4G is a universal Wi-Fi/4G platform, which offers
three miniPCIe (PCIe, USB 2.0, SIM) and a single M.2 B-key (dual-SIM,
USB 3.0) slots, RTC and five Gigabit Ethernet ports with PoE support.

Specification:

- MT7621A (880 MHz)
- 256/512 MB of RAM (DDR3)
- 16/32+ MB of FLASH (SPI NOR)
- optional second SPI flash (8-pin WSON/SOIC)
- 1x microSD (SDXC) flash card reader
- 5x 10/100/1000 Mbps Ethernet, with passive PoE support (24 V) in LAN1
- optional 802.3at/af PoE module for WAN
- 3x miniPCIe slot (with PCIe and USB 2.0 buses, micro SIM and 5 V)
- 1x M.2/NGFF B-key 3042 (USB 3.0/2.0, mini + micro SIM)
- RTC (TI BQ32002, I2C bus) with backup battery (CR2032)
- external hardware watchdog (EM Microelectronic EM6324)
- 1x USB 2.0 Type-A
- 1x micro USB Type-B for system serial console (Holtek HT42B534)
- 11x LED (5 for Ethernet, 5 driven by GPIO, 1x power indicator)
- 3x button (reset, user1, user2)
- 1x I2C (4-pin, 2.54 mm pitch) header on PCB
- 4x SIM (6-pin, 2.00 mm pitch) headers on PCB
- 2x UART2/3 (4-pin, 2.54 mm pitch) headers on PCB
- 1x mechanical power switch
- 1x DC jack with lock (24 V)

Other:

- U-Boot selects default SIM slot, based on value of 'default_sim' env
  variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This board
  has additional logic circuit for M.2 SIM switching. The 'sim-select'
  will work only if both SIM slots are occupied. Otherwise, always slot
  with SIM inside is selected, no matter 'sim-select' value.
- U-Boot enables power in all three miniPCIe and M.2 slots before
  loading the kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
  U-Boot environment variable)
- all three miniPCIe slots have additional 5 V supply on pins 47 and 49
- the board allows to install up to two oversized miniPCIe cards (vendor
  has dedicated MediaTek MT7615N/D cards for this board)
- this board has additional logic circuit controlling PERSTn pins inside
  miniPCIe slots. By default, PERSTn (GPIO19) is routed to all miniPCIe
  slots but setting GPIO22 to high allows PERSTn control per slot, using
  GPIO23-25 (value is inverted)

Flash instructions:

You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:

1. Power the device with reset button pressed, the modem LED will start
   blinking slowly and after ~3 seconds, when it starts blinking faster,
   you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
(backported from commit e68539aca4)
2019-11-24 21:47:25 +01:00
..
3G150B.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
3G300M.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
3G-6200N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
3G-6200NL.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
11ACNAS.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
A5-V11.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AC1200RM.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AI-BR100.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AIR3GII.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ALL0256N-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ALL5002.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ALL5003.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AP-MT7621A-V60.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
AR670W.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AR725W.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC2-v1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC20i.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC20v1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC20v4.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC50.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC50V3.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ArcherC50V4.dts ramips: add support for Archer C50 v4 2019-01-26 21:46:32 +01:00
ArcherMR200.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ASL26555-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ATP-52B.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AWAPN2403.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AWM002-EVB-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
AWUSFREE1.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
BC2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
BDCOM-WAP2100-SK.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
BOCCO.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
BR-6475ND.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
BR-6478AC-V2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
BROADWAY.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
C108.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
CARAMBOLA.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CF-WR800N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
CreativeBox-v1.dts ramips: add support for CreativeBox v1 2018-12-28 12:45:23 +01:00
CS-QR10.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
CY-SWR1100.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
D105.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
D240.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DAP-1350.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DAP-1522-A1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DB-WRT01.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DCH-M225.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DCS-930.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DCS-930L-B1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-300-B1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-300-B7.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-320-B1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-510L.dts ramips: add support for DLINK DIR-510L 2019-03-24 01:44:24 +01:00
DIR-600-B1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-610-A1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-615-D.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-615-H1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-620-A1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-620-D1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-645.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DIR-810L.dts ramips: enable external amplifier for D-Link DIR-810L 2019-11-03 14:02:38 +01:00
DIR-860L-B1.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
DUZUN-DM06.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
DWR-116-A1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DWR-118-A1.dts ramips: mt7620: fix 5GHz WiFi LED on DWR-118-A1 2019-06-05 10:12:30 +02:00
DWR-118-A2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DWR-512-B.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DWR-921-C1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
DWR-922-E2.dts ramips: add support for DLINK DWR-922-E2 2018-12-29 16:03:30 +01:00
E1700.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
elecom_wrc-gst.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ESR-9753.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
EW1200.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
EX2700.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
EX3700.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
EX6150.dts ramips: add missing SPDX identifier for EX6150 2019-03-31 20:59:08 +02:00
F5D8235_V1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
F5D8235_V2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
F7C027.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
F9K110x.dtsi ramips: correct DTS for Belkin F9K1109v1 to include switch definition 2019-04-06 19:14:06 +02:00
F9K1109V1.dts ramips: add support for Belkin F9K1109v1 2019-03-02 13:04:45 +01:00
FIREWRT.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
FONERA20N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
FREESTATION5.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
GB-PC1.dts ramips: Increase GB-PC1 SPI frequency to 80MHz 2019-03-29 09:01:46 +01:00
GB-PC2.dts ramips: Increase GB-PC2 SPI frequency to 80MHz 2019-03-29 09:01:23 +01:00
GHL-R-001.dts ramips: fix support for MX25L25635F flash 2019-01-26 17:10:19 +01:00
GL-MT300A.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
GL-MT300N-V2.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
GL-MT300N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
GL-MT750.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HC5X61.dtsi ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
HC5661.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HC5661A.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
HC5761.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HC5861.dts ramips: HC5861 drop unused gpio group define in dts 2019-03-13 16:25:34 +01:00
HC5861B.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
HC5962.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HDRM200.dts ramips: Add support for Head Weblink HDRM200 2019-05-17 21:41:43 +02:00
HG255D.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HLK-7628N.dts ramips: add support for HILINK HLK-7628N 2019-05-18 13:43:55 +02:00
HLKRM04.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
HPM.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HT-TM02.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
HW550-3G.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
IP2202.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
JHR-N805R.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
JHR-N825R.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
JHR-N926R.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
K2G.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
K2P.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ki_rb.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
kn_rc.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
kn_rf.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
kn_st.dts ramips: add support for ZyXEL Keenetic Start 2019-03-29 07:34:00 +00:00
kn.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
kng_rc.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
LINKIT7688.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
LR-25G001.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
M2M.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
M3.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
M4-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MAC1200RV2.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
MicroWRT.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
MINIEMBPLUG.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MINIEMBWIFI.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MIR3G.dts ramips: Xiaomi MIR3G: detect board name from DTS 2019-03-21 00:57:54 +01:00
MIR3P.dts ramips: add support for Xiaomi Mi Router 3 Pro 2019-03-13 16:25:34 +01:00
MIWIFI-MINI.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MIWIFI-NANO.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
MLW221.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MLWG2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MOFI3500-3GN.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MPRA1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MPRA2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MR-102N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
mt7620a.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
mt7620n.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
mt7621.dtsi ramips: mt7621: add IRQ for GPIO node 2019-06-27 17:17:23 +02:00
mt7628an.dtsi ramips: add #pwm-cells property to MT76x8 dts 2019-03-18 20:43:09 +01:00
MT7620a_MT7530.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts ramips: enable MT7610E 5GHz radio of MT7620a_MT7610e EVB 2019-02-05 19:37:30 +01:00
MT7620a_V22SG.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
MT7620a.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
MT7621.dts ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
MT7628.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
MZK-750DHP.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MZK-DP150N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MZK-EX300NP.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MZK-EX750NP.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MZK-W300NH2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
MZK-WDPR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NA930.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
NBG-419N2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
NBG-419N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
NCS601W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
Newifi-D2.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
NIXCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE.dtsi ramips: fix whitespace and comment issues in dts 2018-08-04 08:39:35 +02:00
NW718.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
OMEGA2.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OMEGA2.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
OMEGA2P.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OY-0001.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PBR-D1.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
PBR-M1.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
PSG1208.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PSG1218.dtsi ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
PSG1218A.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PSG1218B.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PSR-680W.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PWH2004.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
PX-4885-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
QUAD-E4G.dts ramips: add support for ALFA Network Quad-E4G 2019-11-24 21:47:25 +01:00
R36M-E4G.dts ramips: add support for ALFA Network R36M-E4G 2019-11-24 21:45:27 +01:00
R6120.dts ramips: enable R6120 USB power 2019-04-06 19:14:06 +02:00
R6220.dts ramips: create R6220 dtsi and improve WNDR3700v5 support 2019-05-31 11:21:22 +02:00
R6220.dtsi ramips: correct R6220 button flag 2019-11-09 19:15:18 +01:00
R6350.dts ramips: use phy trigger for various Netgear boards 2019-09-07 00:59:41 +02:00
RAK633.dts ramips: add support for Rakwireless RAK633 2019-04-14 23:42:03 +02:00
RB750Gr3.dts ramips: rb750gr3: License DTS as GPL-2.0-or-later OR MIT 2019-02-01 06:35:13 +01:00
RBM11G.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RBM33G.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RE350.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
RE6500.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
RP-N53.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
rt2880.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3050.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3352.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt3883.dtsi ramips: fix dtc compiler warnings 2018-12-06 12:17:25 +01:00
rt5350.dtsi treewide: fix spaces vs. tabs 2018-12-31 16:37:20 +01:00
RT5350F-OLINUXINO-EVB.dts
RT5350F-OLINUXINO.dts
RT5350F-OLINUXINO.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-AC51U.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-AC57U.dts ramips: fix ethernet MAC address of ASUS RT-AC57U 2019-09-09 21:12:23 +08:00
RT-G32-B1.dts ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
RT-N10-PLUS.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-N12-PLUS.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-N13U.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-N14U.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-N15.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RT-N56U.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
RUT5XX.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
SAP-G3200U3.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
SK-WB8.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
SKW92A.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
SL-R7205.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
Telco-Electronics-X1.dts ramips: add support for Telco Electronics X1 2019-05-18 17:59:49 +02:00
TEW-638APB-V2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TEW-691GR.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TEW-692GR.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TEW-714TRU.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
Timecloud.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
TINY-AC.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-MR3020V3.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
TL-MR3420V5.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-WA801NDV5.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-WR802NV4.dts ramips: add TP-Link TL-WR802N-v4 support 2019-02-28 11:26:10 +01:00
TL-WR840NV4.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-WR840NV5.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
TL-WR841NV13.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-WR842NV5.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TL-WR902ACV3.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
TOTOLINK-LR1200.dts ramips: add support for TOTOLINK LR1200 2019-06-05 10:26:33 +02:00
TPLINK-8M-SPLIT-UBOOT.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
TPLINK-8M.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
TUBE-E4G.dts ramips: add support for ALFA Network Tube-E4G 2019-03-11 22:00:26 +01:00
U25AWF-H1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
U35WF.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
U7621-06-256M-16M.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
U7621-06-512M-64M.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
U7621-06.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
U7628-01-128M-16M.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
U7628-01.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
UBNT-ER-e50.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
UBNT-ERX-SFP.dts ramips: add missing soc compatibles to dts 2018-01-09 22:05:46 +01:00
UBNT-ERX.dts
UR-326N4G.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
UR-336UN.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
V11STFE.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
V22RW-2X2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
VAR11N-300.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
VIXMINI.dts ramips: add support for GL.iNet VIXMINI 2019-04-13 18:46:40 +02:00
VOCORE2.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
VOCORE2.dtsi ramips: backport MT7628 pinmux fixes 2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
VOCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
VR500.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
W06.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
W150M.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
W306R_V20.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
W502U.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
W2914NSV2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
W2914NSV2.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WCR150GN.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WCR-1166DS.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WD03.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WE1026-5G-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WF-2881.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WHR-300HP2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WHR-600D.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WHR-1166D.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WHR-G300N.dts ramips: change status LED for Buffalo WHR-G300N 2019-02-14 16:56:15 +01:00
WIDORA-NEO-16M.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WIDORA-NEO-32M.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WIDORA-NEO.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WITI-256M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI-512M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WIZARD8800.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZFI630A.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WIZFI630S.dts ramips: add support for WIZnet WizFi630S board 2019-03-29 07:33:59 +00:00
WL-330N3G.dts ramips: assign correct key-code to wps buttons 2019-11-17 02:48:39 +01:00
WL-330N.dts ramips: assign correct key-code to wps buttons 2019-11-17 02:48:39 +01:00
WL-351.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WL-WN570HA1.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WL-WN575A3.dts ramips: various Wavlink WL-WN575A3 fixes 2019-02-28 11:26:10 +01:00
WLI-TX4-AG300N.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WLR-6000.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WMDR-143N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMR-300.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WN3000RPV3.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WN-AC733GR3.dts ramips: add support for I-O DATA WN-AC733GR3 2019-03-21 00:57:20 +01:00
WN-AC1167GR.dts ramips: add support for I-O DATA WN-AC1167GR 2019-02-14 16:56:14 +01:00
WN-AX1167GR.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WN-GX300GR.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WNCE2001.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WNDR3700V5.dts ramips: create R6220 dtsi and improve WNDR3700v5 support 2019-05-31 11:21:22 +02:00
WR512-3GN-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WR1000.dts ramips: add CUDY WR1000 support 2019-05-31 10:36:36 +02:00
WR1200JS.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WR1201.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WR6202.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WRC-1167GHBK2-S.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WRC-1900GST.dts ramips: add SPDX license identifier into some dts,dtsi 2018-12-28 12:45:23 +01:00
WRC-2533GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRH-300CR.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WRTNODE2.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WRTNODE2P.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WRTNODE2R.dts ramips: fix pinctrl to allow hardware i2c on WRTNODE2R 2019-04-11 22:26:28 +02:00
WRTNODE.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WSR-600.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WSR-1166.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
WT1520-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520.dtsi ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
WT3020-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
WZR-AGL300NH.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
X5.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
X8.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
XDXRN502J.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
XIAOMI-MIR4A-100M.dts ramips: add support for Xiaomi Mi Router 4A (100M Edition) 2019-05-31 11:21:22 +02:00
Y1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
Y1.dtsi ramips: dts: Unify naming of gpio-keys nodes 2019-02-05 16:28:12 +01:00
Y1S.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
YOUKU-YK1.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
YOUKU-YK2.dts ramips: add support for Youku YK-L2 2019-04-06 19:13:49 +02:00
ZBT-APE522II.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZBT-CPE102.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZBT-WA05.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZBT-WE826-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-E.dts ramips: Add support for ZBT WE826-E 2019-05-17 21:41:43 +02:00
ZBT-WE826.dtsi ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZBT-WE1226.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ZBT-WE1326.dts ramips: remove memory node for ZBT-WE1326 2019-10-11 22:31:24 +08:00
ZBT-WE2026.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZBT-WE3526.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ZBT-WG2626.dts ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ZBT-WG3526-16M.dts
ZBT-WG3526-32M.dts
ZBT-WG3526.dtsi ramips: drop m25p,chunked-io from dts 2019-02-05 19:37:30 +01:00
ZBT-WR8305RT.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZL5900V2.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00
ZTE-Q7.dts ramips: dts: Unify naming of gpio-led nodes 2019-02-05 16:28:12 +01:00