mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-19 11:16:32 +00:00
ramips: add support for WIZnet WizFi630S board
The WIZnet WizFi630S board is in the miniPCIe form factor. SoC: Mediatek MT7688AN RAM: 128MB Flash: 32Mb WiFi: 2.4GHz Ethernet: 3x 100Mbit USB: 1 (USB 2.0) serial ports: 2 (1x full, 1xlite) Flash and recovery instructions: Use the factory installed u-boot boot loader. It is available on UART2 (115200,8,n,1). Then get the sysupgrade image from a tftp server. Signed-off-by: Tobias Welz <tw@wiznet.eu> [whitespace and device name in makefile fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
parent
b0395cfc56
commit
7c4b85ee27
@ -429,6 +429,10 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:wan" "6@eth0"
|
||||
;;
|
||||
wiznet,wizfi630s)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:wan" "3:lan" "4:lan" "6@eth0"
|
||||
;;
|
||||
wt3020-4M|\
|
||||
wt3020-8M)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
193
target/linux/ramips/dts/WIZFI630S.dts
Normal file
193
target/linux/ramips/dts/WIZFI630S.dts
Normal file
@ -0,0 +1,193 @@
|
||||
//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
|
||||
model = "WIZnet WizFi630S";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS1,115200";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_run;
|
||||
led-failsafe = &led_run;
|
||||
led-running = &led_run;
|
||||
led-upgrade = &led_run;
|
||||
serial0 = &uart1;
|
||||
serial1 = &uartlite;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_run: run {
|
||||
label = "wizfi630s:green:run";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
ledwps {
|
||||
label = "wizfi630s:green:wps";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leduart1 {
|
||||
label = "wizfi630s:green:uart1";
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leduart2 {
|
||||
label = "wizfi630s:green:uart2";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
scm1 {
|
||||
label = "SCM1";
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
};
|
||||
|
||||
scm2 {
|
||||
label = "SCM2";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_2>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "gpio";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
i2s {
|
||||
ralink,group = "i2s";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
wdt {
|
||||
ralink,group = "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
|
||||
i2c {
|
||||
ralink,group = "i2c";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
refclk {
|
||||
ralink,group = "refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
m25p,chunked-io = <31>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x1fb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x3e>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
mediatek,cd-high;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
@ -408,6 +408,13 @@ define Device/widora_neo-32m
|
||||
endef
|
||||
TARGET_DEVICES += widora_neo-32m
|
||||
|
||||
define Device/wiznet_wizfi630s
|
||||
DTS := WIZFI630S
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_32M)
|
||||
DEVICE_TITLE := WIZnet WizFi630S
|
||||
endef
|
||||
TARGET_DEVICES += wiznet_wizfi630s
|
||||
|
||||
define Device/wrtnode2p
|
||||
DTS := WRTNODE2P
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
Loading…
Reference in New Issue
Block a user