Tianling Shen cc6c3a6ee8 mediatek: add support for OpenEmbed SOM7981 ...

Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 256 MiB SPI-NAND, 32 GB eMMC optional
  RAM: 0.5/1 GB DDR4
  Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B)
  WiFi: MediaTek MT7976C
  USB: 1x USB 3.0
  GPIO: 26-Pin header
  UART: 6 GND, 8 TX, 10 RX (in Pin header)
  Button: Reset, WPS
  Power: Type-C PD

Installation:
The board comes with a third-party custom OpenWrt image, you can upload
sysupgrade image via LuCI directly WITHOUT keeping configurations.

Or power on the board with pressing reset button for 5 second, then visit
http://192.168.1.1 and upload -factory.bin firmware.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>

2024-03-31 20:20:59 +02:00

..

apm821xx

apm821xx: MBL: make mtd chip work

2022-06-19 12:31:02 +02:00

ath79

ath79: add support for Huawei AP5030DN

2024-03-31 18:09:43 +02:00

cns3xxx

uboot-envtools: drop shebang from uci-defaults and lib files

2021-04-10 15:18:14 +02:00

fw_printsys

uboot-envtools: add wrapper scripts for alternate config

2021-04-08 09:20:59 +02:00

fw_setsys

uboot-envtools: add wrapper scripts for alternate config

2021-04-08 09:20:59 +02:00

imx_cortexa7

uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D

2022-07-11 14:28:03 +02:00

imx_cortexa9

uboot-envtools: move imx to imx_cortexa9

2021-11-03 12:45:40 +01:00

ipq40xx

ipq40xx: Add support Netgear LBR20

2024-02-23 19:46:23 +01:00

ipq806x

ipq806x: add support for Extreme Networks AP3935

2023-10-05 00:56:57 +02:00

kirkwood

kirkwood: add ix4-200d support to uboot-envtools

2024-03-23 14:56:50 +01:00

lantiq

uboot-envtools: drop shebang from uci-defaults and lib files

2021-04-10 15:18:14 +02:00

layerscape

layerscape: remove Traverse LS1043 boards

2023-07-01 15:47:08 +02:00

mediatek_filogic

mediatek: add support for OpenEmbed SOM7981

2024-03-31 20:20:59 +02:00

mediatek_mt7622

uboot-envtools: replace use of platform_get_bootdev

2024-02-26 01:29:22 +00:00

mediatek_mt7623

uboot-envtools: replace use of platform_get_bootdev

2024-02-26 01:29:22 +00:00

mediatek_mt7629

mediatek: add support for Netgear EX6250v2 series

2023-07-01 14:42:11 +02:00

mpc85xx

mpc85xx: add support for Enterasys WS-AP3715i

2023-04-08 14:41:01 +02:00

mvebu

uboot-envtools: add settings for Synology DS213j

2023-11-20 13:40:17 +00:00

mxs

uboot-envtools: drop shebang from uci-defaults and lib files

2021-04-10 15:18:14 +02:00

octeon

octeon: n821: add Cisco vEdge 1000 base

2023-07-15 17:05:58 +02:00

oxnas

uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20

2022-03-21 20:16:16 +00:00

pistachio

uboot-envtools: drop shebang from uci-defaults and lib files

2021-04-10 15:18:14 +02:00

qoriq

qoriq: add support for WatchGuard Firebox M300

2021-12-21 21:37:46 +02:00

qualcommax_ipq60xx

qualcommax: ipq60xx: add support for netgear wax214

2024-03-05 06:34:35 +01:00

qualcommax_ipq807x

qualcommax: ipq807x: add support for Linksys MX5300

2024-02-23 13:34:59 +01:00

ramips

ramips: rename mtd partition of ipTIME NAND devices

2024-03-10 16:32:14 +09:00

realtek

uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS

2023-02-13 12:22:17 +01:00

uboot-envtools.sh

uboot-envtools: add support for multiple config partitions

2021-04-08 09:20:59 +02:00