mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
b38d446ecd
Hardware
--------
SoC: Qualcomm IPQ8064
RAM: 235MB
Flash: 128MB NAND (Micron MT29F1G08ABBDAH4)
32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2: Qualcomm Atheros QCA9980
WLAN5: Qualcomm Atheros QCA9980
ETH: LAN1 - Atheros AR8035
LAN2 - Atheros AR8033
USB: USB-A, 2.0
LED: Power (yellow/amber)
LAN1 (yellow/amber)
LAN2 (yellow/amber)
WLAN2G (yellow)
WLAN5G (yellow)
BTN: Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage
MAC Address: LAN1 (label) at APPSBL partition
LAN2: label + 1
WLAN2: label + 8
WLAN5: label + 16
Installation
------------
Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack
`Hit any key to stop autoboot: 5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`
Once OpenWrt has booted, install the firmware through sysupgrade
Signed-off-by: JinGen Lim <openwrt@sn.sg>
125 lines
6.2 KiB
Plaintext
125 lines
6.2 KiB
Plaintext
#
|
|
# Copyright (C) 2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
askey,rt4230w-rev6)
|
|
ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:00:green:wan" "wan" "link_10 link_100 link_1000"
|
|
ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:00:amber:wan" "wan" "tx rx"
|
|
ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:01:green:lan" "lan1" "link_10 link_100 link_1000"
|
|
ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan1" "tx rx"
|
|
ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:02:green:lan" "lan2" "link_10 link_100 link_1000"
|
|
ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan2" "tx rx"
|
|
ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:03:green:lan" "lan3" "link_10 link_100 link_1000"
|
|
ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan3" "tx rx"
|
|
ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:04:green:lan" "lan4" "link_10 link_100 link_1000"
|
|
ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:04:amber:lan" "lan4" "tx rx"
|
|
;;
|
|
buffalo,wxr-2533dhp)
|
|
ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
|
|
ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
|
|
;;
|
|
compex,wpq864)
|
|
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "pcie-usb" "PCIe USB" "green:usb-pcie" "usb3-port1"
|
|
;;
|
|
edgecore,ecw5410)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
|
;;
|
|
extreme,ap3935)
|
|
ucidef_set_led_netdev "wan" "wan" "orange:lan1" "eth1"
|
|
ucidef_set_led_netdev "lan" "lan" "orange:lan2" "eth0"
|
|
;;
|
|
fortinet,fap-421e)
|
|
ucidef_set_led_netdev "eth1-100" "ETH1-100" "amber:eth1" "eth0" "link_100"
|
|
ucidef_set_led_netdev "eth1-1000" "ETH1-1000" "yellow:eth1" "eth0" "link_1000"
|
|
ucidef_set_led_netdev "eth2-100" "ETH2-100" "amber:eth2" "eth1" "link_100"
|
|
ucidef_set_led_netdev "eth2-1000" "ETH2-1000" "yellow:eth2" "eth1" "link_1000"
|
|
ucidef_set_led_wlan "wlan2g" "2.4G" "yellow:2g" "phy1tpt"
|
|
ucidef_set_led_wlan "wlan5g" "5G" "yellow:5g" "phy0tpt"
|
|
ucidef_set_led_usbport "usb" "USB" "amber:power" "usb1-port1" "usb2-port1"
|
|
;;
|
|
meraki,mr52)
|
|
ucidef_set_led_netdev "eth0" "eth0" "green:lan1" "eth0"
|
|
ucidef_set_led_netdev "eth1" "eth1" "green:lan2" "eth1"
|
|
;;
|
|
nec,wg2600hp)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
|
|
;;
|
|
nec,wg2600hp3)
|
|
ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
|
|
ucidef_set_led_netdev "wan-port-10" "WAN-PORT-10" "qca8k-0.0:00:green:wan-1" "wan" "tx rx link_10"
|
|
ucidef_set_led_netdev "wan-port-100" "WAN-PORT-100" "qca8k-0.0:00:green:wan-2" "wan" "tx rx link_100"
|
|
ucidef_set_led_netdev "wan-port-1000" "WAN-PORT-1000" "qca8k-0.0:00:green:wan-3" "wan" "tx rx link_1000"
|
|
ucidef_set_led_netdev "lan1-port-10" "LAN1-PORT-10" "qca8k-0.0:01:green:lan-1" "lan1" "tx rx link_10"
|
|
ucidef_set_led_netdev "lan1-port-100" "LAN1-PORT-100" "qca8k-0.0:01:green:lan-2" "lan1" "tx rx link_100"
|
|
ucidef_set_led_netdev "lan1-port-1000" "LAN1-PORT-1000" "qca8k-0.0:01:green:lan-3" "lan1" "tx rx link_1000"
|
|
ucidef_set_led_netdev "lan2-port-10" "LAN2-PORT-10" "qca8k-0.0:02:green:lan-1" "lan2" "tx rx link_10"
|
|
ucidef_set_led_netdev "lan2-port-100" "LAN2-PORT-100" "qca8k-0.0:02:green:lan-2" "lan2" "tx rx link_100"
|
|
ucidef_set_led_netdev "lan2-port-1000" "LAN2-PORT-1000" "qca8k-0.0:02:green:lan-3" "lan2" "tx rx link_1000"
|
|
ucidef_set_led_netdev "lan3-port-10" "LAN3-PORT-10" "qca8k-0.0:03:green:lan-1" "lan3" "tx rx link_10"
|
|
ucidef_set_led_netdev "lan3-port-100" "LAN3-PORT-100" "qca8k-0.0:03:green:lan-2" "lan3" "tx rx link_100"
|
|
ucidef_set_led_netdev "lan3-port-1000" "LAN3-PORT-1000" "qca8k-0.0:03:green:lan-3" "lan3" "tx rx link_1000"
|
|
ucidef_set_led_netdev "lan4-port-10" "LAN4-PORT-10" "qca8k-0.0:04:green:lan-1" "lan4" "tx rx link_10"
|
|
ucidef_set_led_netdev "lan4-port-100" "LAN4-PORT-100" "qca8k-0.0:04:green:lan-2" "lan4" "tx rx link_100"
|
|
ucidef_set_led_netdev "lan4-port-1000" "LAN4-PORT-1000" "qca8k-0.0:04:green:lan-3" "lan4" "tx rx link_1000"
|
|
;;
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
netgear,r7800 |\
|
|
netgear,xr450 |\
|
|
netgear,xr500)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
|
|
ucidef_set_led_ide "esata" "eSATA" "white:esata"
|
|
;;
|
|
nokia,ac400i)
|
|
ucidef_set_led_wlan "wlan5g" "5G" "green:wlan5g" "wlan0"
|
|
ucidef_set_led_wlan "wlan2g" "2.4G" "green:wlan2g" "wlan1"
|
|
ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "eth0"
|
|
ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "eth1"
|
|
ucidef_set_led_default "ctrl" "CTRL" "green:ctrl" "0"
|
|
ucidef_set_led_default "pwr" "PWR" "green:power" "1"
|
|
;;
|
|
tplink,ad7200)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
|
ucidef_set_led_netdev "lan" "lan" "blue:lan" "br-lan"
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
|
|
ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
|
|
ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
|
|
;;
|
|
tplink,c2600)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
|
|
ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
|
|
;;
|
|
tplink,vr2600v)
|
|
ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt"
|
|
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
|
|
;;
|
|
zyxel,nbg6817)
|
|
ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|