mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
590d1fd0e6
The ZTE MF282 is a LTE router used (exclusively?) by the network operator "3". Specifications ============== SoC: QCA9563 (775MHz) RAM: 128MiB Flash: 8MiB SPI-NOR + 128MiB SPI-NAND LAN: 1x GBit LAN LTE: ZTE MF270 (Cat4), detected as P685M WiFi: QCA9880ac + QCA9560bgn MAC addresses ============= LAN: from config WiFi 1: from config WiFi 2: +1 Installation ============ TFTP installation using UART is preferred. Disassemble the device and connect serial. Put the initramfs image as openwrt.bin to your TFTP server and configure a static IP of 192.168.1.100. Load the initramfs image by typing: setenv serverip 192.168.1.100 setenv ipaddr 192.168.1.1 tftpboot 0x82000000 openwrt.bin bootm 0x82000000 From this intiramfs boot you can take a backup of the currently installed partitions as no vendor firmware is available for download. Once booted, transfer the sysupgrade image and run sysupgrade. LTE Modem ========= The LTE modem is probably the same as in the MF283+, all instructions apply. Configuring the connection using modemmanager works properly, the modem provides three serial ports and a QMI CDC ethernet interface. Signed-off-by: Andreas Böhler <dev@aboehler.at>
130 lines
2.4 KiB
Plaintext
130 lines
2.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
// Copyright (c) 2021 Cezary Jackiewicz
|
|
// Copyright (c) 2021, 2022 Lech Perczak
|
|
// Copyright (c) 2022 David Bauer <mail@david-bauer.net>
|
|
// Copyright (c) 2023 Andreas Böhler <dev@aboehler.at>
|
|
|
|
#include "qca9563_zte_mf28x.dtsi"
|
|
|
|
/ {
|
|
model = "ZTE MF282";
|
|
compatible = "zte,mf282", "qca,qca9563";
|
|
|
|
ubi-concat {
|
|
compatible = "mtd-concat";
|
|
devices = <&ubiconcat0 &ubiconcat1>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x7440000>;
|
|
label = "ubi";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&led_debug {
|
|
label = "blue:debug";
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
|
|
&boot_flash {
|
|
partitions {
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "u-boot-env";
|
|
reg = <0x80000 0x20000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
&system_flash {
|
|
partitions {
|
|
partition@0 {
|
|
label = "fota-flag";
|
|
reg = <0x000000 0x140000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "caldata";
|
|
reg = <0x140000 0x140000>;
|
|
read-only;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cal_caldata_1000: cal@1000 {
|
|
reg = <0x1000 0x440>;
|
|
};
|
|
|
|
cal_caldata_5000: cal@5000 {
|
|
reg = <0x5000 0x844>;
|
|
};
|
|
};
|
|
|
|
partition@280000 {
|
|
label = "mac";
|
|
reg = <0x280000 0x140000>;
|
|
read-only;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_mac_0: macaddr@0 {
|
|
reg = <0x0 0x6>;
|
|
};
|
|
};
|
|
|
|
/* This encompasses stock cfg-param, oops, web partitions,
|
|
* which can be overwritten safely
|
|
*/
|
|
ubiconcat0: partition@3c0000 {
|
|
label = "ubiconcat0";
|
|
reg = <0x3c0000 0xf40000>;
|
|
};
|
|
|
|
/* Kernel MTD size is increased to 8MB from stock 3MB */
|
|
partition@1300000 {
|
|
label = "kernel";
|
|
reg = <0x1300000 0x800000>;
|
|
};
|
|
|
|
/* This encompasses stock rootfs, data, fota partitions,
|
|
* which can be overwritten safely
|
|
*/
|
|
ubiconcat1: partition@1b00000 {
|
|
label = "ubiconcat1";
|
|
reg = <0x1b00000 0x6500000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
nvmem-cells = <&macaddr_mac_0>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&wifi_ath10k {
|
|
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
|
|
nvmem-cell-names = "mac-address", "calibration";
|
|
mac-address-increment = <1>;
|
|
};
|
|
|
|
&wmac {
|
|
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_1000>;
|
|
nvmem-cell-names = "mac-address", "calibration";
|
|
};
|