ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ath79: add support for ZTE MF282

Browse Source 
The ZTE MF282 is a LTE router used (exclusively?) by the network operator
"3".

Specifications
==============

SoC: QCA9563 (775MHz)
RAM: 128MiB
Flash: 8MiB SPI-NOR + 128MiB SPI-NAND
LAN: 1x GBit LAN
LTE: ZTE MF270 (Cat4), detected as P685M
WiFi: QCA9880ac + QCA9560bgn

MAC addresses
=============

LAN: from config
WiFi 1: from config
WiFi 2: +1

Installation
============

TFTP installation using UART is preferred. Disassemble the device and
connect serial. Put the initramfs image as openwrt.bin to your TFTP server
and configure a static IP of 192.168.1.100. Load the initramfs image by
typing:

  setenv serverip 192.168.1.100
  setenv ipaddr 192.168.1.1
  tftpboot 0x82000000 openwrt.bin
  bootm 0x82000000

From this intiramfs boot you can take a backup of the currently installed
partitions as no vendor firmware is available for download.

Once booted, transfer the sysupgrade image and run sysupgrade.

LTE Modem
=========

The LTE modem is probably the same as in the MF283+, all instructions
apply.

Configuring the connection using modemmanager works properly, the modem
provides three serial ports and a QMI CDC ethernet interface.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
This commit is contained in:
Andreas Böhler 2023-04-29 20:48:47 +02:00 committed by Hauke Mehrtens
parent 8bc4aaf45c
commit 590d1fd0e6
3 changed files with 141 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

129
target/linux/ath79/dts/qca9563_zte_mf282.dts Normal file
View File

@ -0,0 +1,129 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2021 Cezary Jackiewicz
// Copyright (c) 2021, 2022 Lech Perczak
// Copyright (c) 2022 David Bauer <mail@david-bauer.net>
// Copyright (c) 2023 Andreas Böhler <dev@aboehler.at>
#include "qca9563_zte_mf28x.dtsi"
/ {
model = "ZTE MF282";
compatible = "zte,mf282", "qca,qca9563";
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x7440000>;
label = "ubi";
};
};
};
};
&led_debug {
label = "blue:debug";
color = <LED_COLOR_ID_BLUE>;
};
&boot_flash {
partitions {
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x20000>;
read-only;
};
};
};
&system_flash {
partitions {
partition@0 {
label = "fota-flag";
reg = <0x000000 0x140000>;
read-only;
};
partition@140000 {
label = "caldata";
reg = <0x140000 0x140000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
cal_caldata_1000: cal@1000 {
reg = <0x1000 0x440>;
};
cal_caldata_5000: cal@5000 {
reg = <0x5000 0x844>;
};
};
partition@280000 {
label = "mac";
reg = <0x280000 0x140000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mac_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
/* This encompasses stock cfg-param, oops, web partitions,
* which can be overwritten safely
*/
ubiconcat0: partition@3c0000 {
label = "ubiconcat0";
reg = <0x3c0000 0xf40000>;
};
/* Kernel MTD size is increased to 8MB from stock 3MB */
partition@1300000 {
label = "kernel";
reg = <0x1300000 0x800000>;
};
/* This encompasses stock rootfs, data, fota partitions,
* which can be overwritten safely
*/
ubiconcat1: partition@1b00000 {
label = "ubiconcat1";
reg = <0x1b00000 0x6500000>;
};
};
};
&eth0 {
nvmem-cells = <&macaddr_mac_0>;
nvmem-cell-names = "mac-address";
};
&wifi_ath10k {
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
nvmem-cell-names = "mac-address", "calibration";
mac-address-increment = <1>;
};
&wmac {
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_1000>;
nvmem-cell-names = "mac-address", "calibration";
};

8
target/linux/ath79/image/nand.mk
View File

@ -390,6 +390,14 @@ define Device/zte_mf281
endef
TARGET_DEVICES += zte_mf281
define Device/zte_mf282
$(Device/zte_mf28x_common)
DEVICE_MODEL := MF282
DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += zte_mf282
define Device/zte_mf286
$(Device/zte_mf28x_common)
DEVICE_MODEL := MF286

4
target/linux/ath79/nand/base-files/etc/board.d/02_network
View File

@ -66,6 +66,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "5:lan"
;;
zte,mf282)
ucidef_set_interface_lan "eth0"
ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
;;
zte,mf286|\
zte,mf286a|\
zte,mf286r)