mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
7f187229a8
Hardware
--------
SoC: Qualcomm IPQ4019
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: 2T2R IPQ4019 bgn
2T2R IPQ4019 a/n/ac
ETH: Atheros AR8033 RGMII PHY
BTN: 1x Connect (WPS)
LED: Power (green/red/yellow)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz1200'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ1200.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz1200.bin uboot0
> mtd write /path/to/uboot-fritz1200.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||
|---|---|---|
| .. | ||
| 030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch | ||
| 031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch | ||
| 040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch | ||
| 050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch | ||
| 050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch | ||
| 050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch | ||
| 050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch | ||
| 070-qcom-spm-fix-probe-order.patch | ||
| 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch | ||
| 072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch | ||
| 073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch | ||
| 074-ARM-qcom-Add-IPQ4019-SoC-support.patch | ||
| 075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch | ||
| 076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch | ||
| 077-qcom-ipq4019-add-USB-devicetree-nodes.patch | ||
| 078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch | ||
| 079-ARM-dts-ipq4019-fix-PCI-range.patch | ||
| 080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch | ||
| 081-clk-fix-apss-cpu-overclocking.patch | ||
| 082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch | ||
| 083-mtd-nand-add-Winbond-manufacturer-and-chip.patch | ||
| 084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch | ||
| 085-mtd-nand-add-macronix-mx35lf1ge4ab.patch | ||
| 086-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch | ||
| 087-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch | ||
| 088-0001-i2c-qup-fix-copyrights-and-update-to-SPDX-identifier.patch | ||
| 088-0003-i2c-qup-minor-code-reorganization-for-use_dma.patch | ||
| 088-0004-i2c-qup-remove-redundant-variables-for-BAM-SG-count.patch | ||
| 088-0005-i2c-qup-schedule-EOT-and-FLUSH-tags-at-the-end-of-tr.patch | ||
| 088-0006-i2c-qup-fix-the-transfer-length-for-BAM-RX-EOT-FLUSH.patch | ||
| 088-0007-i2c-qup-proper-error-handling-for-i2c-error-in-BAM-m.patch | ||
| 088-0008-i2c-qup-use-the-complete-transfer-length-to-choose-D.patch | ||
| 088-0009-i2c-qup-change-completion-timeout-according-to-trans.patch | ||
| 088-0010-i2c-qup-fix-buffer-overflow-for-multiple-msg-of-maxi.patch | ||
| 088-0011-i2c-qup-send-NACK-for-last-read-sub-transfers.patch | ||
| 088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch | ||
| 088-0013-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch | ||
| 090-ipq40xx-fix-high-resolution-timer.patch | ||
| 181-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch | ||
| 303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch | ||
| 700-net-add-qualcomm-mdio-and-phy.patch | ||
| 701-dts-ipq4019-add-mdio-node.patch | ||
| 702-dts-ipq4019-add-PHY-switch-nodes.patch | ||
| 703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | ||
| 706-ar40xx-abort-probe-on-missig-phy.patch | ||
| 710-net-add-qualcomm-essedma-ethernet-driver.patch | ||
| 711-dts-ipq4019-add-ethernet-essedma-node.patch | ||
| 712-mr33-essedma.patch | ||
| 713-essedma-alloc-skb-ip-align.patch | ||
| 714-essedma-add-fix-for-memory-allocation.patch | ||
| 850-soc-add-qualcomm-syscon.patch | ||
| 900-dts-ipq4019-ap-dk01.1.patch | ||
| 901-arm-boot-add-dts-files.patch | ||
| 997-device_tree_cmdline.patch | ||