ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 10:08:59 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
7a945bf88b
openwrt/target/linux/bcm27xx/patches-6.6/950-1244-media-i2c-Add-driver-for-Sony-IMX500-sensor.patch
Álvaro Fernández Rojas 538a1d740c bcm27xx: update to latest RPi patches 
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.58..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-10-31 13:44:23 +01:00

1676 lines
46 KiB
Diff
Raw Blame History

From f9b1e0ffdd9b5134d9356d7e09e9c1a065fdfa13 Mon Sep 17 00:00:00 2001
From: Richard Oliver <richard.oliver@raspberrypi.com>
Date: Thu, 27 Jun 2024 10:11:44 +0100
Subject: [PATCH 1244/1350] media: i2c: Add driver for Sony IMX500 sensor
The Sony IMX500 is a stacked 1/2.3-inch CMOS digital image sensor and
inbuilt AI processor with an active array CNN (Convolutional Neural
Network) inference engine. The native sensor size is 4056H x 3040V, and
the module also contains an in-built ISP for the CNN. The module is
programmable through an I2C interface with firmware and neural network
uploads being made over SPI. This driver supports imaging only.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
---
MAINTAINERS | 1 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx500.c | 1610 ++++++++++++++++++++++++++++++++++++
4 files changed, 1624 insertions(+)
create mode 100644 drivers/media/i2c/imx500.c
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20133,6 +20133,7 @@ L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx500.yaml
+F: drivers/media/i2c/imx500.c
SONY IMX519 SENSOR DRIVER
M: Arducam Kernel Maintenance <info@arducam.com>
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -236,6 +236,18 @@ config VIDEO_IMX477
To compile this driver as a module, choose M here: the
module will be called imx477.
+config VIDEO_IMX500
+ tristate "Sony IMX500 sensor support"
+ depends on I2C && VIDEO_DEV
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX500 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called IMX500.
+
config VIDEO_IMX519
tristate "Arducam IMX519 sensor support"
depends on I2C && VIDEO_DEV
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_VIDEO_IMX355) += imx355.o
obj-$(CONFIG_VIDEO_IMX412) += imx412.o
obj-$(CONFIG_VIDEO_IMX415) += imx415.o
obj-$(CONFIG_VIDEO_IMX477) += imx477.o
+obj-$(CONFIG_VIDEO_IMX500) += imx500.o
obj-$(CONFIG_VIDEO_IMX519) += imx519.o
obj-$(CONFIG_VIDEO_IMX708) += imx708.o
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
--- /dev/null
+++ b/drivers/media/i2c/imx500.c
@@ -0,0 +1,1610 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * A V4L2 driver for Sony IMX500 cameras.
+ * Copyright (C) 2024, Raspberry Pi Ltd
+ */
+#include <asm/unaligned.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <media/v4l2-cci.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mediabus.h>
+
+/* Chip ID */
+#define IMX500_REG_CHIP_ID CCI_REG16(0x0016)
+#define IMX500_CHIP_ID 0x0500
+
+#define IMX500_REG_MODE_SELECT CCI_REG8(0x0100)
+#define IMX500_MODE_STANDBY 0x00
+#define IMX500_MODE_STREAMING 0x01
+
+#define IMX500_REG_IMAGE_ONLY_MODE CCI_REG8(0xa700)
+#define IMX500_IMAGE_ONLY_FALSE 0x00
+#define IMX500_IMAGE_ONLY_TRUE 0x01
+
+#define IMX500_REG_ORIENTATION CCI_REG8(0x101)
+
+#define IMX500_XCLK_FREQ 24000000
+
+#define IMX500_DEFAULT_LINK_FREQ 444000000
+
+#define IMX500_PIXEL_RATE 744000000
+
+/* V_TIMING internal */
+#define IMX500_REG_FRAME_LENGTH CCI_REG16(0x0340)
+#define IMX500_FRAME_LENGTH_MAX 0xffdc
+#define IMX500_VBLANK_MIN 4
+
+/* H_TIMING internal */
+#define IMX500_REG_LINE_LENGTH CCI_REG16(0x0342)
+#define IMX500_LINE_LENGTH_MAX 0xfff0
+
+/* Long exposure multiplier */
+#define IMX500_LONG_EXP_SHIFT_MAX 7
+#define IMX500_LONG_EXP_SHIFT_REG CCI_REG8(0x3210)
+
+/* Exposure control */
+#define IMX500_REG_EXPOSURE CCI_REG16(0x0202)
+#define IMX500_EXPOSURE_OFFSET 22
+#define IMX500_EXPOSURE_MIN 8
+#define IMX500_EXPOSURE_STEP 1
+#define IMX500_EXPOSURE_DEFAULT 0x640
+#define IMX500_EXPOSURE_MAX (IMX500_FRAME_LENGTH_MAX - IMX500_EXPOSURE_OFFSET)
+
+/* Analog gain control */
+#define IMX500_REG_ANALOG_GAIN CCI_REG16(0x0204)
+#define IMX500_ANA_GAIN_MIN 0
+#define IMX500_ANA_GAIN_MAX 978
+#define IMX500_ANA_GAIN_STEP 1
+#define IMX500_ANA_GAIN_DEFAULT 0x0
+
+/* Colour balance controls */
+#define IMX500_REG_COLOUR_BALANCE_R CCI_REG16(0xd804)
+#define IMX500_REG_COLOUR_BALANCE_GR CCI_REG16(0xd806)
+#define IMX500_REG_COLOUR_BALANCE_GB CCI_REG16(0xd808)
+#define IMX500_REG_COLOUR_BALANCE_B CCI_REG16(0xd80a)
+#define IMX500_COLOUR_BALANCE_MIN 0x0001
+#define IMX500_COLOUR_BALANCE_MAX 0x0fff
+#define IMX500_COLOUR_BALANCE_STEP 0x0001
+#define IMX500_COLOUR_BALANCE_DEFAULT 0x0100
+
+/* Embedded sizes */
+#define IMX500_MAX_EMBEDDED_SIZE \
+ (2 * ((((IMX500_PIXEL_ARRAY_WIDTH * 10) >> 3) + 15) & ~15))
+
+/* IMX500 native and active pixel array size. */
+#define IMX500_NATIVE_WIDTH 4072U
+#define IMX500_NATIVE_HEIGHT 3176U
+#define IMX500_PIXEL_ARRAY_LEFT 8U
+#define IMX500_PIXEL_ARRAY_TOP 16U
+#define IMX500_PIXEL_ARRAY_WIDTH 4056U
+#define IMX500_PIXEL_ARRAY_HEIGHT 3040U
+
+#define NUM_PADS 1
+
+/* regulator supplies */
+static const char *const imx500_supply_name[] = {
+ /* Supplies can be enabled in any order */
+ "vana", /* Analog (2.7V) supply */
+ "vdig", /* Digital Core (0.84V) supply */
+ "vif", /* Interface (1.8V) supply */
+};
+
+#define IMX500_NUM_SUPPLIES ARRAY_SIZE(imx500_supply_name)
+
+struct imx500_reg_list {
+ unsigned int num_of_regs;
+ const struct cci_reg_sequence *regs;
+};
+
+/* Mode : resolution and related config&values */
+struct imx500_mode {
+ /* Frame width */
+ unsigned int width;
+
+ /* Frame height */
+ unsigned int height;
+
+ /* H-timing in pixels */
+ unsigned int line_length_pix;
+
+ /* Analog crop rectangle. */
+ struct v4l2_rect crop;
+
+ /* Default framerate. */
+ unsigned int framerate_default;
+
+ /* Default register values */
+ struct imx500_reg_list reg_list;
+};
+
+static const struct cci_reg_sequence mode_common_regs[] = {
+ { CCI_REG8(0x0305), 0x02 },
+ { CCI_REG8(0x0306), 0x00 },
+ { CCI_REG8(0x030d), 0x02 },
+ { CCI_REG8(0x030e), 0x00 },
+ { CCI_REG8(0x0106), 0x01 }, /* FAST_STANDBY_CTL */
+ { CCI_REG8(0x0136), 0x1b }, /* EXCLK_FREQ */
+ { CCI_REG8(0x0137), 0x00 },
+ { CCI_REG8(0x0138), 0x01 }, /* TEMP_SENS_CTL */
+ { CCI_REG8(0x0112), 0x0a },
+ { CCI_REG8(0x0113), 0x0a },
+ { CCI_REG8(0x0114), 0x01 }, /* CSI_LANE_MODE */
+};
+
+/* 12 mpix 15fps */
+static const struct cci_reg_sequence mode_4056x3040_regs[] = {
+ { CCI_REG8(0x0340), 0x12 },
+ { CCI_REG8(0x0341), 0x42 },
+ { CCI_REG8(0x0342), 0x45 },
+ { CCI_REG8(0x0343), 0xec },
+ { CCI_REG8(0x3210), 0x00 },
+ { CCI_REG8(0x0344), 0x00 },
+ { CCI_REG8(0x0345), 0x00 },
+ { CCI_REG8(0x0346), 0x00 },
+ { CCI_REG8(0x0347), 0x00 },
+ { CCI_REG8(0x0348), 0x0f },
+ { CCI_REG8(0x0349), 0xd7 },
+ { CCI_REG8(0x0350), 0x00 },
+ { CCI_REG8(0x034a), 0x0b },
+ { CCI_REG8(0x034b), 0xdf },
+ { CCI_REG8(0x3f58), 0x01 },
+ { CCI_REG8(0x0381), 0x01 },
+ { CCI_REG8(0x0383), 0x01 },
+ { CCI_REG8(0x0385), 0x01 },
+ { CCI_REG8(0x0387), 0x01 },
+ { CCI_REG8(0x0900), 0x00 },
+ { CCI_REG8(0x0901), 0x11 },
+ { CCI_REG8(0x0902), 0x00 },
+ { CCI_REG8(0x3241), 0x11 },
+ { CCI_REG8(0x3242), 0x01 },
+ { CCI_REG8(0x3250), 0x00 },
+ { CCI_REG8(0x3f0f), 0x00 },
+ { CCI_REG8(0x3f40), 0x00 },
+ { CCI_REG8(0x3f41), 0x00 },
+ { CCI_REG8(0x3f42), 0x00 },
+ { CCI_REG8(0x3f43), 0x00 },
+ { CCI_REG8(0xb34e), 0x00 },
+ { CCI_REG8(0xb351), 0x20 },
+ { CCI_REG8(0xb35c), 0x00 },
+ { CCI_REG8(0xb35e), 0x08 },
+ { CCI_REG8(0x0401), 0x00 },
+ { CCI_REG8(0x0404), 0x00 },
+ { CCI_REG8(0x0405), 0x10 },
+ { CCI_REG8(0x0408), 0x00 },
+ { CCI_REG8(0x0409), 0x00 },
+ { CCI_REG8(0x040a), 0x00 },
+ { CCI_REG8(0x040b), 0x00 },
+ { CCI_REG8(0x040c), 0x0f },
+ { CCI_REG8(0x040d), 0xd8 },
+ { CCI_REG8(0x040e), 0x0b },
+ { CCI_REG8(0x040f), 0xe0 },
+ { CCI_REG8(0x034c), 0x0f },
+ { CCI_REG8(0x034d), 0xd8 },
+ { CCI_REG8(0x034e), 0x0b },
+ { CCI_REG8(0x034f), 0xe0 },
+ { CCI_REG8(0x0301), 0x05 },
+ { CCI_REG8(0x0303), 0x02 },
+ { CCI_REG8(0x0307), 0x9b },
+ { CCI_REG8(0x0309), 0x0a },
+ { CCI_REG8(0x030b), 0x01 },
+ { CCI_REG8(0x030f), 0x4a },
+ { CCI_REG8(0x0310), 0x01 },
+ { CCI_REG8(0x0820), 0x07 },
+ { CCI_REG8(0x0821), 0xce },
+ { CCI_REG8(0x0822), 0x00 },
+ { CCI_REG8(0x0823), 0x00 },
+ { CCI_REG8(0x3e20), 0x01 },
+ { CCI_REG8(0x3e35), 0x01 },
+ { CCI_REG8(0x3e36), 0x01 },
+ { CCI_REG8(0x3e37), 0x00 },
+ { CCI_REG8(0x3e3a), 0x01 },
+ { CCI_REG8(0x3e3b), 0x00 },
+ { CCI_REG8(0x00e3), 0x00 },
+ { CCI_REG8(0x00e4), 0x00 },
+ { CCI_REG8(0x00e6), 0x00 },
+ { CCI_REG8(0x00e7), 0x00 },
+ { CCI_REG8(0x00e8), 0x00 },
+ { CCI_REG8(0x00e9), 0x00 },
+ { CCI_REG8(0x3f50), 0x00 },
+ { CCI_REG8(0x3f56), 0x02 },
+ { CCI_REG8(0x3f57), 0x42 },
+ { CCI_REG8(0x3606), 0x01 },
+ { CCI_REG8(0x3607), 0x01 },
+ { CCI_REG8(0x3f26), 0x00 },
+ { CCI_REG8(0x3f4a), 0x00 },
+ { CCI_REG8(0x3f4b), 0x00 },
+ { CCI_REG8(0x4bc0), 0x16 },
+ { CCI_REG8(0x7ba8), 0x00 },
+ { CCI_REG8(0x7ba9), 0x00 },
+ { CCI_REG8(0x886b), 0x00 },
+ { CCI_REG8(0x579a), 0x00 },
+ { CCI_REG8(0x579b), 0x0a },
+ { CCI_REG8(0x579c), 0x01 },
+ { CCI_REG8(0x579d), 0x2a },
+ { CCI_REG8(0x57ac), 0x00 },
+ { CCI_REG8(0x57ad), 0x00 },
+ { CCI_REG8(0x57ae), 0x00 },
+ { CCI_REG8(0x57af), 0x81 },
+ { CCI_REG8(0x57be), 0x00 },
+ { CCI_REG8(0x57bf), 0x00 },
+ { CCI_REG8(0x57c0), 0x00 },
+ { CCI_REG8(0x57c1), 0x81 },
+ { CCI_REG8(0x57d0), 0x00 },
+ { CCI_REG8(0x57d1), 0x00 },
+ { CCI_REG8(0x57d2), 0x00 },
+ { CCI_REG8(0x57d3), 0x81 },
+ { CCI_REG8(0x5324), 0x00 },
+ { CCI_REG8(0x5325), 0x26 },
+ { CCI_REG8(0x5326), 0x00 },
+ { CCI_REG8(0x5327), 0x6b },
+ { CCI_REG8(0xbca7), 0x00 },
+ { CCI_REG8(0x5fcc), 0x28 },
+ { CCI_REG8(0x5fd7), 0x2d },
+ { CCI_REG8(0x5fe2), 0x2d },
+ { CCI_REG8(0x5fed), 0x2d },
+ { CCI_REG8(0x5ff8), 0x2d },
+ { CCI_REG8(0x6003), 0x2d },
+ { CCI_REG8(0x5d0b), 0x01 },
+ { CCI_REG8(0x6f6d), 0x00 },
+ { CCI_REG8(0x61c9), 0x00 },
+ { CCI_REG8(0x5352), 0x00 },
+ { CCI_REG8(0x5353), 0x49 },
+ { CCI_REG8(0x5356), 0x00 },
+ { CCI_REG8(0x5357), 0x30 },
+ { CCI_REG8(0x5358), 0x00 },
+ { CCI_REG8(0x5359), 0x3b },
+ { CCI_REG8(0x535c), 0x00 },
+ { CCI_REG8(0x535d), 0xb0 },
+ { CCI_REG8(0x6187), 0x18 },
+ { CCI_REG8(0x6189), 0x18 },
+ { CCI_REG8(0x618b), 0x18 },
+ { CCI_REG8(0x618d), 0x1d },
+ { CCI_REG8(0x618f), 0x1d },
+ { CCI_REG8(0x5414), 0x01 },
+ { CCI_REG8(0x5415), 0x0c },
+ { CCI_REG8(0xbca8), 0x0a },
+ { CCI_REG8(0x5fcf), 0x1e },
+ { CCI_REG8(0x5fda), 0x1e },
+ { CCI_REG8(0x5fe5), 0x1e },
+ { CCI_REG8(0x5ff0), 0x1e },
+ { CCI_REG8(0x5ffb), 0x1e },
+ { CCI_REG8(0x6006), 0x1e },
+ { CCI_REG8(0x616e), 0x04 },
+ { CCI_REG8(0x616f), 0x04 },
+ { CCI_REG8(0x6170), 0x04 },
+ { CCI_REG8(0x6171), 0x06 },
+ { CCI_REG8(0x6172), 0x06 },
+ { CCI_REG8(0x6173), 0x0c },
+ { CCI_REG8(0x6174), 0x0c },
+ { CCI_REG8(0x6175), 0x0c },
+ { CCI_REG8(0x6176), 0x00 },
+ { CCI_REG8(0x6177), 0x10 },
+ { CCI_REG8(0x6178), 0x00 },
+ { CCI_REG8(0x6179), 0x1a },
+ { CCI_REG8(0x617a), 0x00 },
+ { CCI_REG8(0x617b), 0x1a },
+ { CCI_REG8(0x617c), 0x00 },
+ { CCI_REG8(0x617d), 0x27 },
+ { CCI_REG8(0x617e), 0x00 },
+ { CCI_REG8(0x617f), 0x27 },
+ { CCI_REG8(0x6180), 0x00 },
+ { CCI_REG8(0x6181), 0x44 },
+ { CCI_REG8(0x6182), 0x00 },
+ { CCI_REG8(0x6183), 0x44 },
+ { CCI_REG8(0x6184), 0x00 },
+ { CCI_REG8(0x6185), 0x44 },
+ { CCI_REG8(0x5dfc), 0x0a },
+ { CCI_REG8(0x5e00), 0x0a },
+ { CCI_REG8(0x5e04), 0x0a },
+ { CCI_REG8(0x5e08), 0x0a },
+ { CCI_REG8(0x5dfd), 0x0a },
+ { CCI_REG8(0x5e01), 0x0a },
+ { CCI_REG8(0x5e05), 0x0a },
+ { CCI_REG8(0x5e09), 0x0a },
+ { CCI_REG8(0x5dfe), 0x0a },
+ { CCI_REG8(0x5e02), 0x0a },
+ { CCI_REG8(0x5e06), 0x0a },
+ { CCI_REG8(0x5e0a), 0x0a },
+ { CCI_REG8(0x5dff), 0x0a },
+ { CCI_REG8(0x5e03), 0x0a },
+ { CCI_REG8(0x5e07), 0x0a },
+ { CCI_REG8(0x5e0b), 0x0a },
+ { CCI_REG8(0x5dec), 0x12 },
+ { CCI_REG8(0x5df0), 0x12 },
+ { CCI_REG8(0x5df4), 0x21 },
+ { CCI_REG8(0x5df8), 0x31 },
+ { CCI_REG8(0x5ded), 0x12 },
+ { CCI_REG8(0x5df1), 0x12 },
+ { CCI_REG8(0x5df5), 0x21 },
+ { CCI_REG8(0x5df9), 0x31 },
+ { CCI_REG8(0x5dee), 0x12 },
+ { CCI_REG8(0x5df2), 0x12 },
+ { CCI_REG8(0x5df6), 0x21 },
+ { CCI_REG8(0x5dfa), 0x31 },
+ { CCI_REG8(0x5def), 0x12 },
+ { CCI_REG8(0x5df3), 0x12 },
+ { CCI_REG8(0x5df7), 0x21 },
+ { CCI_REG8(0x5dfb), 0x31 },
+ { CCI_REG8(0x5ddc), 0x0d },
+ { CCI_REG8(0x5de0), 0x0d },
+ { CCI_REG8(0x5de4), 0x0d },
+ { CCI_REG8(0x5de8), 0x0d },
+ { CCI_REG8(0x5ddd), 0x0d },
+ { CCI_REG8(0x5de1), 0x0d },
+ { CCI_REG8(0x5de5), 0x0d },
+ { CCI_REG8(0x5de9), 0x0d },
+ { CCI_REG8(0x5dde), 0x0d },
+ { CCI_REG8(0x5de2), 0x0d },
+ { CCI_REG8(0x5de6), 0x0d },
+ { CCI_REG8(0x5dea), 0x0d },
+ { CCI_REG8(0x5ddf), 0x0d },
+ { CCI_REG8(0x5de3), 0x0d },
+ { CCI_REG8(0x5de7), 0x0d },
+ { CCI_REG8(0x5deb), 0x0d },
+ { CCI_REG8(0x5dcc), 0x55 },
+ { CCI_REG8(0x5dd0), 0x50 },
+ { CCI_REG8(0x5dd4), 0x4b },
+ { CCI_REG8(0x5dd8), 0x4b },
+ { CCI_REG8(0x5dcd), 0x55 },
+ { CCI_REG8(0x5dd1), 0x50 },
+ { CCI_REG8(0x5dd5), 0x4b },
+ { CCI_REG8(0x5dd9), 0x4b },
+ { CCI_REG8(0x5dce), 0x55 },
+ { CCI_REG8(0x5dd2), 0x50 },
+ { CCI_REG8(0x5dd6), 0x4b },
+ { CCI_REG8(0x5dda), 0x4b },
+ { CCI_REG8(0x5dcf), 0x55 },
+ { CCI_REG8(0x5dd3), 0x50 },
+ { CCI_REG8(0x5dd7), 0x4b },
+ { CCI_REG8(0x5ddb), 0x4b },
+ { CCI_REG8(0x0202), 0x12 },
+ { CCI_REG8(0x0203), 0x2c },
+ { CCI_REG8(0x0204), 0x00 },
+ { CCI_REG8(0x0205), 0x00 },
+ { CCI_REG8(0x020e), 0x01 },
+ { CCI_REG8(0x020f), 0x00 },
+ { CCI_REG8(0x0210), 0x01 },
+ { CCI_REG8(0x0211), 0x00 },
+ { CCI_REG8(0x0212), 0x01 },
+ { CCI_REG8(0x0213), 0x00 },
+ { CCI_REG8(0x0214), 0x01 },
+ { CCI_REG8(0x0215), 0x00 },
+};
+
+/* 2x2 binned. 56fps */
+static const struct cci_reg_sequence mode_2028x1520_regs[] = {
+ { CCI_REG8(0x0112), 0x0a },
+ { CCI_REG8(0x0113), 0x0a },
+ { CCI_REG8(0x0114), 0x01 },
+ { CCI_REG8(0x0342), 0x24 },
+ { CCI_REG8(0x0343), 0xb6 },
+ { CCI_REG8(0x0340), 0x0b },
+ { CCI_REG8(0x0341), 0x9c },
+ { CCI_REG8(0x3210), 0x00 },
+ { CCI_REG8(0x0344), 0x00 },
+ { CCI_REG8(0x0345), 0x00 },
+ { CCI_REG8(0x0346), 0x00 },
+ { CCI_REG8(0x0347), 0x00 },
+ { CCI_REG8(0x0348), 0x0f },
+ { CCI_REG8(0x0349), 0xd7 },
+ { CCI_REG8(0x0350), 0x00 },
+ { CCI_REG8(0x034a), 0x0b },
+ { CCI_REG8(0x034b), 0xdf },
+ { CCI_REG8(0x3f58), 0x01 },
+ { CCI_REG8(0x0381), 0x01 },
+ { CCI_REG8(0x0383), 0x01 },
+ { CCI_REG8(0x0385), 0x01 },
+ { CCI_REG8(0x0387), 0x01 },
+ { CCI_REG8(0x0900), 0x01 },
+ { CCI_REG8(0x0901), 0x22 },
+ { CCI_REG8(0x0902), 0x02 },
+ { CCI_REG8(0x3241), 0x11 },
+ { CCI_REG8(0x3242), 0x01 },
+ { CCI_REG8(0x3250), 0x03 },
+ { CCI_REG8(0x3f0f), 0x00 },
+ { CCI_REG8(0x3f40), 0x00 },
+ { CCI_REG8(0x3f41), 0x00 },
+ { CCI_REG8(0x3f42), 0x00 },
+ { CCI_REG8(0x3f43), 0x00 },
+ { CCI_REG8(0xb34e), 0x00 },
+ { CCI_REG8(0xb351), 0x20 },
+ { CCI_REG8(0xb35c), 0x00 },
+ { CCI_REG8(0xb35e), 0x08 },
+ { CCI_REG8(0x0401), 0x00 },
+ { CCI_REG8(0x0404), 0x00 },
+ { CCI_REG8(0x0405), 0x10 },
+ { CCI_REG8(0x0408), 0x00 },
+ { CCI_REG8(0x0409), 0x00 },
+ { CCI_REG8(0x040a), 0x00 },
+ { CCI_REG8(0x040b), 0x00 },
+ { CCI_REG8(0x040c), 0x07 },
+ { CCI_REG8(0x040d), 0xec },
+ { CCI_REG8(0x040e), 0x05 },
+ { CCI_REG8(0x040f), 0xf0 },
+ { CCI_REG8(0x034c), 0x07 },
+ { CCI_REG8(0x034d), 0xec },
+ { CCI_REG8(0x034e), 0x05 },
+ { CCI_REG8(0x034f), 0xf0 },
+ { CCI_REG8(0x0301), 0x05 },
+ { CCI_REG8(0x0303), 0x02 },
+ { CCI_REG8(0x0307), 0x9b },
+ { CCI_REG8(0x0309), 0x0a },
+ { CCI_REG8(0x030b), 0x01 },
+ { CCI_REG8(0x030f), 0x4a },
+ { CCI_REG8(0x0310), 0x01 },
+ { CCI_REG8(0x0820), 0x07 },
+ { CCI_REG8(0x0821), 0xce },
+ { CCI_REG8(0x0822), 0x00 },
+ { CCI_REG8(0x0823), 0x00 },
+ { CCI_REG8(0x3e20), 0x01 },
+ { CCI_REG8(0x3e35), 0x01 },
+ { CCI_REG8(0x3e36), 0x01 },
+ { CCI_REG8(0x3e37), 0x00 },
+ { CCI_REG8(0x3e3a), 0x01 },
+ { CCI_REG8(0x3e3b), 0x00 },
+ { CCI_REG8(0x00e3), 0x00 },
+ { CCI_REG8(0x00e4), 0x00 },
+ { CCI_REG8(0x00e6), 0x00 },
+ { CCI_REG8(0x00e7), 0x00 },
+ { CCI_REG8(0x00e8), 0x00 },
+ { CCI_REG8(0x00e9), 0x00 },
+ { CCI_REG8(0x3f50), 0x00 },
+ { CCI_REG8(0x3f56), 0x01 },
+ { CCI_REG8(0x3f57), 0x30 },
+ { CCI_REG8(0x3606), 0x01 },
+ { CCI_REG8(0x3607), 0x01 },
+ { CCI_REG8(0x3f26), 0x00 },
+ { CCI_REG8(0x3f4a), 0x00 },
+ { CCI_REG8(0x3f4b), 0x00 },
+ { CCI_REG8(0x4bc0), 0x16 },
+ { CCI_REG8(0x7ba8), 0x00 },
+ { CCI_REG8(0x7ba9), 0x00 },
+ { CCI_REG8(0x886b), 0x00 },
+ { CCI_REG8(0x579a), 0x00 },
+ { CCI_REG8(0x579b), 0x0a },
+ { CCI_REG8(0x579c), 0x01 },
+ { CCI_REG8(0x579d), 0x2a },
+ { CCI_REG8(0x57ac), 0x00 },
+ { CCI_REG8(0x57ad), 0x00 },
+ { CCI_REG8(0x57ae), 0x00 },
+ { CCI_REG8(0x57af), 0x81 },
+ { CCI_REG8(0x57be), 0x00 },
+ { CCI_REG8(0x57bf), 0x00 },
+ { CCI_REG8(0x57c0), 0x00 },
+ { CCI_REG8(0x57c1), 0x81 },
+ { CCI_REG8(0x57d0), 0x00 },
+ { CCI_REG8(0x57d1), 0x00 },
+ { CCI_REG8(0x57d2), 0x00 },
+ { CCI_REG8(0x57d3), 0x81 },
+ { CCI_REG8(0x5324), 0x00 },
+ { CCI_REG8(0x5325), 0x31 },
+ { CCI_REG8(0x5326), 0x00 },
+ { CCI_REG8(0x5327), 0x60 },
+ { CCI_REG8(0xbca7), 0x08 },
+ { CCI_REG8(0x5fcc), 0x1e },
+ { CCI_REG8(0x5fd7), 0x1e },
+ { CCI_REG8(0x5fe2), 0x1e },
+ { CCI_REG8(0x5fed), 0x1e },
+ { CCI_REG8(0x5ff8), 0x1e },
+ { CCI_REG8(0x6003), 0x1e },
+ { CCI_REG8(0x5d0b), 0x02 },
+ { CCI_REG8(0x6f6d), 0x01 },
+ { CCI_REG8(0x61c9), 0x68 },
+ { CCI_REG8(0x5352), 0x00 },
+ { CCI_REG8(0x5353), 0x3f },
+ { CCI_REG8(0x5356), 0x00 },
+ { CCI_REG8(0x5357), 0x1c },
+ { CCI_REG8(0x5358), 0x00 },
+ { CCI_REG8(0x5359), 0x3d },
+ { CCI_REG8(0x535c), 0x00 },
+ { CCI_REG8(0x535d), 0xa6 },
+ { CCI_REG8(0x6187), 0x1d },
+ { CCI_REG8(0x6189), 0x1d },
+ { CCI_REG8(0x618b), 0x1d },
+ { CCI_REG8(0x618d), 0x23 },
+ { CCI_REG8(0x618f), 0x23 },
+ { CCI_REG8(0x5414), 0x01 },
+ { CCI_REG8(0x5415), 0x12 },
+ { CCI_REG8(0xbca8), 0x00 },
+ { CCI_REG8(0x5fcf), 0x28 },
+ { CCI_REG8(0x5fda), 0x2d },
+ { CCI_REG8(0x5fe5), 0x2d },
+ { CCI_REG8(0x5ff0), 0x2d },
+ { CCI_REG8(0x5ffb), 0x2d },
+ { CCI_REG8(0x6006), 0x2d },
+ { CCI_REG8(0x616e), 0x04 },
+ { CCI_REG8(0x616f), 0x04 },
+ { CCI_REG8(0x6170), 0x04 },
+ { CCI_REG8(0x6171), 0x06 },
+ { CCI_REG8(0x6172), 0x06 },
+ { CCI_REG8(0x6173), 0x0c },
+ { CCI_REG8(0x6174), 0x0c },
+ { CCI_REG8(0x6175), 0x0c },
+ { CCI_REG8(0x6176), 0x00 },
+ { CCI_REG8(0x6177), 0x10 },
+ { CCI_REG8(0x6178), 0x00 },
+ { CCI_REG8(0x6179), 0x1a },
+ { CCI_REG8(0x617a), 0x00 },
+ { CCI_REG8(0x617b), 0x1a },
+ { CCI_REG8(0x617c), 0x00 },
+ { CCI_REG8(0x617d), 0x27 },
+ { CCI_REG8(0x617e), 0x00 },
+ { CCI_REG8(0x617f), 0x27 },
+ { CCI_REG8(0x6180), 0x00 },
+ { CCI_REG8(0x6181), 0x44 },
+ { CCI_REG8(0x6182), 0x00 },
+ { CCI_REG8(0x6183), 0x44 },
+ { CCI_REG8(0x6184), 0x00 },
+ { CCI_REG8(0x6185), 0x44 },
+ { CCI_REG8(0x5dfc), 0x0a },
+ { CCI_REG8(0x5e00), 0x0a },
+ { CCI_REG8(0x5e04), 0x0a },
+ { CCI_REG8(0x5e08), 0x0a },
+ { CCI_REG8(0x5dfd), 0x0a },
+ { CCI_REG8(0x5e01), 0x0a },
+ { CCI_REG8(0x5e05), 0x0a },
+ { CCI_REG8(0x5e09), 0x0a },
+ { CCI_REG8(0x5dfe), 0x0a },
+ { CCI_REG8(0x5e02), 0x0a },
+ { CCI_REG8(0x5e06), 0x0a },
+ { CCI_REG8(0x5e0a), 0x0a },
+ { CCI_REG8(0x5dff), 0x0a },
+ { CCI_REG8(0x5e03), 0x0a },
+ { CCI_REG8(0x5e07), 0x0a },
+ { CCI_REG8(0x5e0b), 0x0a },
+ { CCI_REG8(0x5dec), 0x12 },
+ { CCI_REG8(0x5df0), 0x12 },
+ { CCI_REG8(0x5df4), 0x21 },
+ { CCI_REG8(0x5df8), 0x31 },
+ { CCI_REG8(0x5ded), 0x12 },
+ { CCI_REG8(0x5df1), 0x12 },
+ { CCI_REG8(0x5df5), 0x21 },
+ { CCI_REG8(0x5df9), 0x31 },
+ { CCI_REG8(0x5dee), 0x12 },
+ { CCI_REG8(0x5df2), 0x12 },
+ { CCI_REG8(0x5df6), 0x21 },
+ { CCI_REG8(0x5dfa), 0x31 },
+ { CCI_REG8(0x5def), 0x12 },
+ { CCI_REG8(0x5df3), 0x12 },
+ { CCI_REG8(0x5df7), 0x21 },
+ { CCI_REG8(0x5dfb), 0x31 },
+ { CCI_REG8(0x5ddc), 0x0d },
+ { CCI_REG8(0x5de0), 0x0d },
+ { CCI_REG8(0x5de4), 0x0d },
+ { CCI_REG8(0x5de8), 0x0d },
+ { CCI_REG8(0x5ddd), 0x0d },
+ { CCI_REG8(0x5de1), 0x0d },
+ { CCI_REG8(0x5de5), 0x0d },
+ { CCI_REG8(0x5de9), 0x0d },
+ { CCI_REG8(0x5dde), 0x0d },
+ { CCI_REG8(0x5de2), 0x0d },
+ { CCI_REG8(0x5de6), 0x0d },
+ { CCI_REG8(0x5dea), 0x0d },
+ { CCI_REG8(0x5ddf), 0x0d },
+ { CCI_REG8(0x5de3), 0x0d },
+ { CCI_REG8(0x5de7), 0x0d },
+ { CCI_REG8(0x5deb), 0x0d },
+ { CCI_REG8(0x5dcc), 0x55 },
+ { CCI_REG8(0x5dd0), 0x50 },
+ { CCI_REG8(0x5dd4), 0x4b },
+ { CCI_REG8(0x5dd8), 0x4b },
+ { CCI_REG8(0x5dcd), 0x55 },
+ { CCI_REG8(0x5dd1), 0x50 },
+ { CCI_REG8(0x5dd5), 0x4b },
+ { CCI_REG8(0x5dd9), 0x4b },
+ { CCI_REG8(0x5dce), 0x55 },
+ { CCI_REG8(0x5dd2), 0x50 },
+ { CCI_REG8(0x5dd6), 0x4b },
+ { CCI_REG8(0x5dda), 0x4b },
+ { CCI_REG8(0x5dcf), 0x55 },
+ { CCI_REG8(0x5dd3), 0x50 },
+ { CCI_REG8(0x5dd7), 0x4b },
+ { CCI_REG8(0x5ddb), 0x4b },
+ { CCI_REG8(0x0202), 0x0b },
+ { CCI_REG8(0x0203), 0x86 },
+ { CCI_REG8(0x0204), 0x00 },
+ { CCI_REG8(0x0205), 0x00 },
+ { CCI_REG8(0x020e), 0x01 },
+ { CCI_REG8(0x020f), 0x00 },
+ { CCI_REG8(0x0210), 0x01 },
+ { CCI_REG8(0x0211), 0x00 },
+ { CCI_REG8(0x0212), 0x01 },
+ { CCI_REG8(0x0213), 0x00 },
+ { CCI_REG8(0x0214), 0x01 },
+ { CCI_REG8(0x0215), 0x00 },
+};
+
+/* Mode configs */
+static const struct imx500_mode imx500_supported_modes[] = {
+ {
+ /* 12MPix 10fps mode */
+ .width = 4056,
+ .height = 3040,
+ .line_length_pix = 17900,
+ .crop = {
+ .left = IMX500_PIXEL_ARRAY_LEFT,
+ .top = IMX500_PIXEL_ARRAY_TOP,
+ .width = 4056,
+ .height = 3040,
+ },
+ .framerate_default = 10,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
+ .regs = mode_4056x3040_regs,
+ },
+ },
+ {
+ /* 2x2 binned 40fps mode */
+ .width = 2028,
+ .height = 1520,
+ .line_length_pix = 9398,
+ .crop = {
+ .left = IMX500_PIXEL_ARRAY_LEFT,
+ .top = IMX500_PIXEL_ARRAY_TOP,
+ .width = 4056,
+ .height = 3040,
+ },
+ .framerate_default = 40,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_2028x1520_regs),
+ .regs = mode_2028x1520_regs,
+ },
+ },
+};
+
+/*
+ * The supported formats.
+ * This table MUST contain 4 entries per format, to cover the various flip
+ * combinations in the order
+ * - no flip
+ * - h flip
+ * - v flip
+ * - h&v flips
+ */
+static const u32 codes[] = {
+ /* 10-bit modes. */
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+};
+
+struct imx500 {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct regmap *regmap;
+
+ unsigned int fmt_code;
+
+ struct clk *xclk;
+ u32 xclk_freq;
+
+ struct gpio_desc *reset_gpio;
+ struct regulator_bulk_data supplies[IMX500_NUM_SUPPLIES];
+
+ struct v4l2_ctrl_handler ctrl_handler;
+ /* V4L2 Controls */
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+ struct v4l2_ctrl *exposure;
+ struct v4l2_ctrl *vflip;
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl *hblank;
+
+ /* Current mode */
+ const struct imx500_mode *mode;
+
+ /*
+ * Mutex for serialized access:
+ * Protect sensor module set pad format and start/stop streaming safely.
+ */
+ struct mutex mutex;
+
+ /* Streaming on/off */
+ bool streaming;
+
+ /* Rewrite common registers on stream on? */
+ bool common_regs_written;
+
+ /* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
+ unsigned int long_exp_shift;
+};
+
+static inline struct imx500 *to_imx500(struct v4l2_subdev *_sd)
+{
+ return container_of(_sd, struct imx500, sd);
+}
+
+/* Get bayer order based on flip setting. */
+static u32 imx500_get_format_code(struct imx500 *imx500)
+{
+ unsigned int i;
+
+ lockdep_assert_held(&imx500->mutex);
+
+ i = (imx500->vflip->val ? 2 : 0) | (imx500->hflip->val ? 1 : 0);
+
+ return codes[i];
+}
+
+static void imx500_set_default_format(struct imx500 *imx500)
+{
+ /* Set default mode to max resolution */
+ imx500->mode = &imx500_supported_modes[0];
+ imx500->fmt_code = MEDIA_BUS_FMT_SRGGB10_1X10;
+}
+
+static void imx500_adjust_exposure_range(struct imx500 *imx500)
+{
+ int exposure_max, exposure_def;
+
+ /* Honour the VBLANK limits when setting exposure. */
+ exposure_max = imx500->mode->height + imx500->vblank->val -
+ IMX500_EXPOSURE_OFFSET;
+ exposure_def = min(exposure_max, imx500->exposure->val);
+ __v4l2_ctrl_modify_range(imx500->exposure, imx500->exposure->minimum,
+ exposure_max, imx500->exposure->step,
+ exposure_def);
+}
+
+static int imx500_set_frame_length(struct imx500 *imx500, unsigned int val)
+{
+ int ret = 0;
+
+ imx500->long_exp_shift = 0;
+
+ while (val > IMX500_FRAME_LENGTH_MAX) {
+ imx500->long_exp_shift++;
+ val >>= 1;
+ }
+
+ ret = cci_write(imx500->regmap, IMX500_REG_FRAME_LENGTH, val, NULL);
+ if (ret)
+ return ret;
+
+ return cci_write(imx500->regmap, IMX500_LONG_EXP_SHIFT_REG,
+ imx500->long_exp_shift, NULL);
+}
+
+static int imx500_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct imx500 *imx500 =
+ container_of(ctrl->handler, struct imx500, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ int ret = 0;
+
+ /*
+ * The VBLANK control may change the limits of usable exposure, so check
+ * and adjust if necessary.
+ */
+ if (ctrl->id == V4L2_CID_VBLANK)
+ imx500_adjust_exposure_range(imx500);
+
+ /*
+ * Applying V4L2 control value only happens
+ * when power is up for streaming
+ */
+ if (pm_runtime_get_if_in_use(&client->dev) == 0)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ANALOGUE_GAIN:
+ ret = cci_write(imx500->regmap, IMX500_REG_ANALOG_GAIN,
+ ctrl->val, NULL);
+ break;
+ case V4L2_CID_EXPOSURE:
+ ret = cci_write(imx500->regmap, IMX500_REG_EXPOSURE,
+ ctrl->val >> imx500->long_exp_shift, NULL);
+ break;
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_VFLIP:
+ ret = cci_write(imx500->regmap, IMX500_REG_ORIENTATION,
+ imx500->hflip->val | imx500->vflip->val << 1,
+ NULL);
+ break;
+ case V4L2_CID_VBLANK:
+ ret = imx500_set_frame_length(imx500,
+ imx500->mode->height + ctrl->val);
+ break;
+ case V4L2_CID_HBLANK:
+ ret = cci_write(imx500->regmap, IMX500_REG_LINE_LENGTH,
+ imx500->mode->width + ctrl->val, NULL);
+ break;
+ case V4L2_CID_NOTIFY_GAINS:
+ ret = cci_write(imx500->regmap, IMX500_REG_COLOUR_BALANCE_B,
+ ctrl->p_new.p_u32[0], NULL);
+ cci_write(imx500->regmap, IMX500_REG_COLOUR_BALANCE_GB,
+ ctrl->p_new.p_u32[1], &ret);
+ cci_write(imx500->regmap, IMX500_REG_COLOUR_BALANCE_GR,
+ ctrl->p_new.p_u32[2], &ret);
+ cci_write(imx500->regmap, IMX500_REG_COLOUR_BALANCE_R,
+ ctrl->p_new.p_u32[3], &ret);
+ break;
+ default:
+ dev_info(&client->dev,
+ "ctrl(id:0x%x,val:0x%x) is not handled\n", ctrl->id,
+ ctrl->val);
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_mark_last_busy(&client->dev);
+ pm_runtime_put_autosuspend(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops imx500_ctrl_ops = {
+ .s_ctrl = imx500_set_ctrl,
+};
+
+static const struct v4l2_ctrl_config imx500_notify_gains_ctrl = {
+ .ops = &imx500_ctrl_ops,
+ .id = V4L2_CID_NOTIFY_GAINS,
+ .type = V4L2_CTRL_TYPE_U32,
+ .min = IMX500_COLOUR_BALANCE_MIN,
+ .max = IMX500_COLOUR_BALANCE_MAX,
+ .step = IMX500_COLOUR_BALANCE_STEP,
+ .def = IMX500_COLOUR_BALANCE_DEFAULT,
+ .dims = { 4 },
+ .elem_size = sizeof(u32),
+};
+
+static int imx500_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct imx500 *imx500 = to_imx500(sd);
+
+ if (code->pad >= NUM_PADS)
+ return -EINVAL;
+
+ if (code->index != 0)
+ return -EINVAL;
+
+ code->code = imx500_get_format_code(imx500);
+
+ return 0;
+}
+
+static int imx500_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct imx500 *imx500 = to_imx500(sd);
+
+ if (fse->pad >= NUM_PADS)
+ return -EINVAL;
+
+ const struct imx500_mode *mode_list = imx500_supported_modes;
+ unsigned int num_modes = ARRAY_SIZE(imx500_supported_modes);
+
+ if (fse->index >= num_modes)
+ return -EINVAL;
+
+ if (fse->code != imx500_get_format_code(imx500))
+ return -EINVAL;
+
+ fse->min_width = mode_list[fse->index].width;
+ fse->max_width = fse->min_width;
+ fse->min_height = mode_list[fse->index].height;
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static void imx500_update_image_pad_format(struct imx500 *imx500,
+ const struct imx500_mode *mode,
+ struct v4l2_subdev_format *fmt)
+{
+ fmt->format.width = mode->width;
+ fmt->format.height = mode->height;
+ fmt->format.field = V4L2_FIELD_NONE;
+ fmt->format.colorspace = V4L2_COLORSPACE_RAW;
+ fmt->format.ycbcr_enc =
+ V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->format.colorspace);
+ fmt->format.quantization = V4L2_MAP_QUANTIZATION_DEFAULT(
+ true, fmt->format.colorspace, fmt->format.ycbcr_enc);
+ fmt->format.xfer_func =
+ V4L2_MAP_XFER_FUNC_DEFAULT(fmt->format.colorspace);
+}
+
+static int imx500_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct imx500 *imx500 = to_imx500(sd);
+
+ if (fmt->pad >= NUM_PADS)
+ return -EINVAL;
+
+ mutex_lock(&imx500->mutex);
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(
+ &imx500->sd, sd_state, fmt->pad);
+ /* update the code which could change due to vflip or hflip */
+ try_fmt->code = imx500_get_format_code(imx500);
+ fmt->format = *try_fmt;
+ } else {
+ imx500_update_image_pad_format(imx500, imx500->mode, fmt);
+ fmt->format.code = imx500_get_format_code(imx500);
+ }
+
+ mutex_unlock(&imx500->mutex);
+ return 0;
+}
+
+static unsigned int imx500_get_frame_length(const struct imx500_mode *mode,
+ unsigned int framerate_default)
+{
+ u64 frame_length;
+
+ frame_length = IMX500_PIXEL_RATE;
+ do_div(frame_length, (u64)framerate_default * mode->line_length_pix);
+
+ if (WARN_ON(frame_length > IMX500_FRAME_LENGTH_MAX))
+ frame_length = IMX500_FRAME_LENGTH_MAX;
+
+ return max_t(unsigned int, frame_length, mode->height);
+}
+
+static void imx500_set_framing_limits(struct imx500 *imx500)
+{
+ unsigned int frm_length_default, hblank_min;
+ const struct imx500_mode *mode = imx500->mode;
+
+ frm_length_default =
+ imx500_get_frame_length(mode, mode->framerate_default);
+
+ /* Default to no long exposure multiplier. */
+ imx500->long_exp_shift = 0;
+
+ /* Update limits and set FPS to default */
+ __v4l2_ctrl_modify_range(
+ imx500->vblank, 1,
+ ((1 << IMX500_LONG_EXP_SHIFT_MAX) * IMX500_FRAME_LENGTH_MAX) -
+ mode->height,
+ IMX500_VBLANK_MIN, frm_length_default - mode->height);
+
+ /* Setting this will adjust the exposure limits as well. */
+ __v4l2_ctrl_s_ctrl(imx500->vblank, frm_length_default - mode->height);
+
+ hblank_min = mode->line_length_pix - mode->width;
+ __v4l2_ctrl_modify_range(imx500->hblank, hblank_min, hblank_min, 1,
+ hblank_min);
+ __v4l2_ctrl_s_ctrl(imx500->hblank, hblank_min);
+}
+
+static int imx500_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct v4l2_mbus_framefmt *framefmt;
+ const struct imx500_mode *mode;
+ struct imx500 *imx500 = to_imx500(sd);
+
+ if (fmt->pad >= NUM_PADS)
+ return -EINVAL;
+
+ mutex_lock(&imx500->mutex);
+
+ const struct imx500_mode *mode_list = imx500_supported_modes;
+ unsigned int num_modes = ARRAY_SIZE(imx500_supported_modes);
+
+ /* Bayer order varies with flips */
+ fmt->format.code = imx500_get_format_code(imx500);
+
+ mode = v4l2_find_nearest_size(mode_list, num_modes, width, height,
+ fmt->format.width, fmt->format.height);
+ imx500_update_image_pad_format(imx500, mode, fmt);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
+ *framefmt = fmt->format;
+ } else if (imx500->mode != mode) {
+ imx500->mode = mode;
+ imx500->fmt_code = fmt->format.code;
+ imx500_set_framing_limits(imx500);
+ }
+
+ mutex_unlock(&imx500->mutex);
+
+ return 0;
+}
+
+static const struct v4l2_rect *
+__imx500_get_pad_crop(struct imx500 *imx500, struct v4l2_subdev_state *sd_state,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&imx500->sd, sd_state, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx500->mode->crop;
+ }
+
+ return NULL;
+}
+
+static int imx500_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_selection *sel)
+{
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP: {
+ struct imx500 *imx500 = to_imx500(sd);
+
+ mutex_lock(&imx500->mutex);
+ sel->r = *__imx500_get_pad_crop(imx500, sd_state, sel->pad,
+ sel->which);
+ mutex_unlock(&imx500->mutex);
+
+ return 0;
+ }
+
+ case V4L2_SEL_TGT_NATIVE_SIZE:
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = IMX500_NATIVE_WIDTH;
+ sel->r.height = IMX500_NATIVE_HEIGHT;
+
+ return 0;
+
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ sel->r.left = IMX500_PIXEL_ARRAY_LEFT;
+ sel->r.top = IMX500_PIXEL_ARRAY_TOP;
+ sel->r.width = IMX500_PIXEL_ARRAY_WIDTH;
+ sel->r.height = IMX500_PIXEL_ARRAY_HEIGHT;
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* Start streaming */
+static int imx500_start_streaming(struct imx500 *imx500)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ const struct imx500_reg_list *reg_list;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(&client->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = cci_write(imx500->regmap, IMX500_REG_IMAGE_ONLY_MODE,
+ IMX500_IMAGE_ONLY_TRUE,
+ NULL);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set image mode\n",
+ __func__);
+ return ret;
+ }
+
+ if (!imx500->common_regs_written) {
+ ret = cci_multi_reg_write(imx500->regmap, mode_common_regs,
+ ARRAY_SIZE(mode_common_regs), NULL);
+
+ if (ret) {
+ dev_err(&client->dev,
+ "%s failed to set common settings\n", __func__);
+ return ret;
+ }
+
+ imx500->common_regs_written = true;
+ }
+
+ /* Apply default values of current mode */
+ reg_list = &imx500->mode->reg_list;
+ ret = cci_multi_reg_write(imx500->regmap, reg_list->regs,
+ reg_list->num_of_regs, NULL);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set mode\n", __func__);
+ return ret;
+ }
+
+ /* Apply customized values from user */
+ ret = __v4l2_ctrl_handler_setup(imx500->sd.ctrl_handler);
+
+ /* Disable any sensor startup frame drops. This must be written here! */
+ cci_write(imx500->regmap, CCI_REG8(0xD405), 0, &ret);
+
+ /* set stream on register */
+ cci_write(imx500->regmap, IMX500_REG_MODE_SELECT, IMX500_MODE_STREAMING,
+ &ret);
+
+ return ret;
+}
+
+/* Stop streaming */
+static void imx500_stop_streaming(struct imx500 *imx500)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ int ret;
+
+ /* set stream off register */
+ ret = cci_write(imx500->regmap, IMX500_REG_MODE_SELECT,
+ IMX500_MODE_STANDBY, NULL);
+ if (ret)
+ dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+ pm_runtime_mark_last_busy(&client->dev);
+ pm_runtime_put_autosuspend(&client->dev);
+}
+
+static int imx500_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct imx500 *imx500 = to_imx500(sd);
+ int ret = 0;
+
+ mutex_lock(&imx500->mutex);
+ if (imx500->streaming == enable) {
+ mutex_unlock(&imx500->mutex);
+ return 0;
+ }
+
+ if (enable) {
+ /*
+ * Apply default & customized values
+ * and then start streaming.
+ */
+ ret = imx500_start_streaming(imx500);
+ if (ret)
+ goto err_start_streaming;
+ } else {
+ imx500_stop_streaming(imx500);
+ }
+
+ imx500->streaming = enable;
+
+ /* vflip and hflip cannot change during streaming */
+ __v4l2_ctrl_grab(imx500->vflip, enable);
+ __v4l2_ctrl_grab(imx500->hflip, enable);
+
+ mutex_unlock(&imx500->mutex);
+
+ return ret;
+
+err_start_streaming:
+ mutex_unlock(&imx500->mutex);
+
+ return ret;
+}
+
+/* Power/clock management functions */
+static int imx500_power_on(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx500 *imx500 = to_imx500(sd);
+ int ret;
+
+ ret = regulator_bulk_enable(IMX500_NUM_SUPPLIES, imx500->supplies);
+ if (ret) {
+ dev_err(&client->dev, "%s: failed to enable regulators\n",
+ __func__);
+ return ret;
+ }
+
+ /* T4 - 1us
+ * Ambiguous: Regulators rising to INCK start is specified by the datasheet
+ * but also "Presence of INCK during Power off is acceptable"
+ */
+ udelay(2);
+
+ ret = clk_prepare_enable(imx500->xclk);
+ if (ret) {
+ dev_err(&client->dev, "%s: failed to enable clock\n", __func__);
+ goto reg_off;
+ }
+
+ /* T5 - 0ms
+ * Ambiguous: Regulators rising to XCLR rising is specified by the datasheet
+ * as 0ms but also "XCLR pin should be set to 'High' after INCK supplied.".
+ * T4 and T5 are shown as overlapping.
+ */
+ gpiod_set_value_cansleep(imx500->reset_gpio, 1);
+
+ /* T7 - 9ms
+ * "INCK start and CXLR rising till Send Streaming Command wait time"
+ */
+ usleep_range(9000, 12000);
+
+ return 0;
+
+reg_off:
+ regulator_bulk_disable(IMX500_NUM_SUPPLIES, imx500->supplies);
+ return ret;
+}
+
+static int imx500_power_off(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx500 *imx500 = to_imx500(sd);
+
+ /* Datasheet specifies power down sequence as INCK disable, XCLR low,
+ * regulator disable. T1 (XCLR neg-edge to regulator disable) is specified
+ * as 0us.
+ *
+ * Note, this is not the reverse order of power up.
+ */
+ clk_disable_unprepare(imx500->xclk);
+ gpiod_set_value_cansleep(imx500->reset_gpio, 0);
+ regulator_bulk_disable(IMX500_NUM_SUPPLIES, imx500->supplies);
+
+ /* Force reprogramming of the common registers when powered up again. */
+ imx500->common_regs_written = false;
+
+ return 0;
+}
+
+static int imx500_get_regulators(struct imx500 *imx500)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ unsigned int i;
+
+ for (i = 0; i < IMX500_NUM_SUPPLIES; i++)
+ imx500->supplies[i].supply = imx500_supply_name[i];
+
+ return devm_regulator_bulk_get(&client->dev, IMX500_NUM_SUPPLIES,
+ imx500->supplies);
+}
+
+/* Verify chip ID */
+static int imx500_identify_module(struct imx500 *imx500)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ int ret;
+ u64 val;
+
+ ret = cci_read(imx500->regmap, IMX500_REG_CHIP_ID, &val, NULL);
+ if (ret) {
+ dev_err(&client->dev,
+ "failed to read chip id %x, with error %d\n",
+ IMX500_CHIP_ID, ret);
+ return ret;
+ }
+
+ if (val != IMX500_CHIP_ID) {
+ dev_err(&client->dev, "chip id mismatch: %x!=%llx\n",
+ IMX500_CHIP_ID, val);
+ return -EIO;
+ }
+
+ dev_info(&client->dev, "Device found is imx%llx\n", val);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops imx500_core_ops = {
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops imx500_video_ops = {
+ .s_stream = imx500_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx500_pad_ops = {
+ .enum_mbus_code = imx500_enum_mbus_code,
+ .get_fmt = imx500_get_pad_format,
+ .set_fmt = imx500_set_pad_format,
+ .get_selection = imx500_get_selection,
+ .enum_frame_size = imx500_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops imx500_subdev_ops = {
+ .core = &imx500_core_ops,
+ .video = &imx500_video_ops,
+ .pad = &imx500_pad_ops,
+};
+
+static const s64 imx500_link_freq_menu[] = {
+ IMX500_DEFAULT_LINK_FREQ,
+};
+
+/* Initialize control handlers */
+static int imx500_init_controls(struct imx500 *imx500)
+{
+ struct v4l2_ctrl_handler *ctrl_hdlr;
+ struct i2c_client *client = v4l2_get_subdevdata(&imx500->sd);
+ struct v4l2_fwnode_device_properties props;
+ int ret;
+
+ ctrl_hdlr = &imx500->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16);
+ if (ret)
+ return ret;
+
+ mutex_init(&imx500->mutex);
+ ctrl_hdlr->lock = &imx500->mutex;
+
+ /* By default, PIXEL_RATE is read only */
+ imx500->pixel_rate = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx500_ctrl_ops, V4L2_CID_PIXEL_RATE,
+ IMX500_PIXEL_RATE, IMX500_PIXEL_RATE, 1, IMX500_PIXEL_RATE);
+
+ /* LINK_FREQ is also read only */
+ imx500->link_freq =
+ v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx500_ctrl_ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(imx500_link_freq_menu) - 1, 0,
+ imx500_link_freq_menu);
+ if (imx500->link_freq)
+ imx500->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ /*
+ * Create the controls here, but mode specific limits are setup
+ * in the imx500_set_framing_limits() call below.
+ */
+ imx500->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx500_ctrl_ops,
+ V4L2_CID_VBLANK, 0, 0xffff, 1, 0);
+ imx500->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx500_ctrl_ops,
+ V4L2_CID_HBLANK, 0, 0xffff, 1, 0);
+
+ imx500->exposure = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx500_ctrl_ops, V4L2_CID_EXPOSURE,
+ IMX500_EXPOSURE_MIN, IMX500_EXPOSURE_MAX, IMX500_EXPOSURE_STEP,
+ IMX500_EXPOSURE_DEFAULT);
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx500_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+ IMX500_ANA_GAIN_MIN, IMX500_ANA_GAIN_MAX,
+ IMX500_ANA_GAIN_STEP, IMX500_ANA_GAIN_DEFAULT);
+
+ imx500->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx500_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ if (imx500->hflip)
+ imx500->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ imx500->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx500_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ if (imx500->vflip)
+ imx500->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ v4l2_ctrl_new_custom(ctrl_hdlr, &imx500_notify_gains_ctrl, NULL);
+
+ if (ctrl_hdlr->error) {
+ ret = ctrl_hdlr->error;
+ dev_err(&client->dev, "%s control init failed (%d)\n", __func__,
+ ret);
+ goto error;
+ }
+
+ ret = v4l2_fwnode_device_parse(&client->dev, &props);
+ if (ret)
+ goto error;
+
+ ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx500_ctrl_ops,
+ &props);
+ if (ret)
+ goto error;
+
+ imx500->sd.ctrl_handler = ctrl_hdlr;
+
+ /* Setup exposure and frame/line length limits. */
+ imx500_set_framing_limits(imx500);
+
+ return 0;
+
+error:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ mutex_destroy(&imx500->mutex);
+
+ return ret;
+}
+
+static void imx500_free_controls(struct imx500 *imx500)
+{
+ v4l2_ctrl_handler_free(imx500->sd.ctrl_handler);
+ mutex_destroy(&imx500->mutex);
+}
+
+static int imx500_check_hwcfg(struct device *dev)
+{
+ struct fwnode_handle *endpoint;
+ struct v4l2_fwnode_endpoint ep_cfg = { .bus_type =
+ V4L2_MBUS_CSI2_DPHY };
+ int ret = -EINVAL;
+
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+ if (!endpoint) {
+ dev_err(dev, "endpoint node not found\n");
+ return -EINVAL;
+ }
+
+ if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
+ dev_err(dev, "could not parse endpoint\n");
+ goto error_out;
+ }
+
+ /* Check the number of MIPI CSI2 data lanes */
+ if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
+ dev_err(dev, "only 2 data lanes are currently supported\n");
+ goto error_out;
+ }
+
+ /* Check the link frequency set in device tree */
+ if (!ep_cfg.nr_of_link_frequencies) {
+ dev_err(dev, "link-frequency property not found in DT\n");
+ goto error_out;
+ }
+
+ if (ep_cfg.nr_of_link_frequencies != 1 ||
+ ep_cfg.link_frequencies[0] != IMX500_DEFAULT_LINK_FREQ) {
+ dev_err(dev, "Link frequency not supported: %lld\n",
+ ep_cfg.link_frequencies[0]);
+ goto error_out;
+ }
+
+ ret = 0;
+
+error_out:
+ v4l2_fwnode_endpoint_free(&ep_cfg);
+ fwnode_handle_put(endpoint);
+
+ return ret;
+}
+
+static int imx500_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct imx500 *imx500;
+ int ret;
+
+ imx500 = devm_kzalloc(&client->dev, sizeof(*imx500), GFP_KERNEL);
+ if (!imx500)
+ return -ENOMEM;
+
+ imx500->regmap = devm_cci_regmap_init_i2c(client, 16);
+ if (IS_ERR(imx500->regmap))
+ return dev_err_probe(dev, PTR_ERR(imx500->regmap),
+ "failed to initialise CCI\n");
+
+ v4l2_i2c_subdev_init(&imx500->sd, client, &imx500_subdev_ops);
+
+ /* Check the hardware configuration in device tree */
+ if (imx500_check_hwcfg(dev))
+ return -EINVAL;
+
+ /* Get system clock (xclk) */
+ imx500->xclk = devm_clk_get(dev, NULL);
+ if (IS_ERR(imx500->xclk))
+ return dev_err_probe(dev, PTR_ERR(imx500->xclk),
+ "failed to get xclk\n");
+
+ imx500->xclk_freq = clk_get_rate(imx500->xclk);
+ if (imx500->xclk_freq != IMX500_XCLK_FREQ) {
+ dev_err(dev, "xclk frequency not supported: %d Hz\n",
+ imx500->xclk_freq);
+ return -EINVAL;
+ }
+
+ ret = imx500_get_regulators(imx500);
+ if (ret) {
+ dev_err(dev, "failed to get regulators\n");
+ return ret;
+ }
+
+ imx500->reset_gpio =
+ devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+
+ /*
+ * The sensor must be powered for imx500_identify_module()
+ * to be able to read the CHIP_ID register
+ */
+ ret = imx500_power_on(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_get_noresume(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, 5000);
+ pm_runtime_use_autosuspend(dev);
+
+ ret = imx500_identify_module(imx500);
+ if (ret)
+ goto error_power_off;
+
+ /* Initialize default format */
+ imx500_set_default_format(imx500);
+
+ /* This needs the pm runtime to be registered. */
+ ret = imx500_init_controls(imx500);
+ if (ret)
+ goto error_power_off;
+
+ /* Initialize subdev */
+ imx500->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+ V4L2_SUBDEV_FL_HAS_EVENTS;
+ imx500->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ /* Initialize source pads */
+ imx500->pad.flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&imx500->sd.entity, NUM_PADS,
+ &imx500->pad);
+ if (ret) {
+ dev_err(dev, "failed to init entity pads: %d\n", ret);
+ goto error_handler_free;
+ }
+
+ ret = v4l2_async_register_subdev_sensor(&imx500->sd);
+ if (ret < 0) {
+ dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
+ goto error_media_entity;
+ }
+
+ pm_runtime_mark_last_busy(&client->dev);
+ pm_runtime_put_autosuspend(&client->dev);
+
+ return 0;
+
+error_media_entity:
+ media_entity_cleanup(&imx500->sd.entity);
+
+error_handler_free:
+ imx500_free_controls(imx500);
+
+error_power_off:
+ pm_runtime_disable(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+ imx500_power_off(&client->dev);
+
+ return ret;
+}
+
+static void imx500_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx500 *imx500 = to_imx500(sd);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ imx500_free_controls(imx500);
+
+ pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ imx500_power_off(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+}
+
+static const struct of_device_id imx500_dt_ids[] = {
+ { .compatible = "sony,imx500" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, imx500_dt_ids);
+
+static const struct dev_pm_ops imx500_pm_ops = { SET_RUNTIME_PM_OPS(
+ imx500_power_off, imx500_power_on, NULL) };
+
+static struct i2c_driver imx500_i2c_driver = {
+ .driver = {
+ .name = "imx500",
+ .of_match_table = imx500_dt_ids,
+ .pm = &imx500_pm_ops,
+ },
+ .probe = imx500_probe,
+ .remove = imx500_remove,
+};
+
+module_i2c_driver(imx500_i2c_driver);
+
+MODULE_AUTHOR("Naushir Patuck <naush@raspberrypi.com>");
+MODULE_DESCRIPTION("Sony IMX500 sensor driver");
+MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink