openwrt/package/boot/uboot-envtools/files/mediatek_filogic
Ian Oderon 77354213b7 mediatek: add support for Zbtlink ZBT-Z8103AX
Specifications:
SoC: MediaTek MT7981B
RAM: 256MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 3 LAN (Gigabit)
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND

No. of Antennas: 6
Note: Upon opening the router, only 5 antennas were connected
to the mainboard.

Led Layout:
Power-Mesh-5gwifi-WAN-LAN3-LAN2-LAN1-2gWiFi

Buttons:
Reset-Mesh

Installation:
A. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled (modified by the seller),
you can easily upgrade by going to the dashboard (192.168.1.1) and then
navigate to System -> Backup/Flash firmware, then flash the firmware

B. Through TFTP
Standard installation via UART:

1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin).
2. Power on the router. Make sure that you can access your router via UART.
3. Restart the router then repeatedly press ctrl + c to skip default boot.
4. Type > bootmenu
5. Press '2' to select upgrade firmware
6. Press 'Y' on 'Run image after upgrading?'
7. Press '0' and hit 'enter' to select TFTP client (default)
8. Fill the U-Boot's IP address and TFTP server's IP address.
9. Finally, enter the 'firmware' filename.

Signed-off-by: Ian Oderon <ianoderon@gmail.com>
(cherry picked from commit 4300bc6688)
2024-07-03 09:19:41 +02:00

124 lines
3.7 KiB
Plaintext

#
# Copyright (C) 2021 OpenWrt.org
#
[ -e /etc/config/ubootenv ] && exit 0
touch /etc/config/ubootenv
. /lib/uboot-envtools.sh
. /lib/functions.sh
board=$(board_name)
case "$board" in
asus,rt-ax59u)
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
;;
bananapi,bpi-r3)
rootdev="$(cmdline_get_var root)"
rootdev="${rootdev##*/}"
rootdev="${rootdev%%p[0-9]*}"
case "$rootdev" in
mmc*)
local envdev=$(find_mmc_part "ubootenv" $rootdev)
ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
;;
mtd*)
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
ubootenv_add_uci_config "$envdev" "0x20000" "0x20000" "0x20000" "1"
;;
ubi*)
. /lib/upgrade/nand.sh
local envubi=$(nand_find_ubi ubi)
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
;;
esac
;;
cmcc,rax3000m)
case "$(cmdline_get_var root)" in
/dev/mmc*)
local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
;;
*)
. /lib/upgrade/nand.sh
local envubi=$(nand_find_ubi ubi)
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
;;
esac
;;
glinet,gl-mt3000)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
;;
glinet,gl-mt6000)
local envdev=$(find_mmc_part "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
;;
mercusys,mr90x-v1|\
routerich,ax3000)
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
;;
cetron,ct3003|\
netgear,wax220|\
zbtlink,zbt-z8102ax|\
zbtlink,zbt-z8103ax)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
ubnt,unifi-6-plus)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
;;
xiaomi,mi-router-ax3000t|\
xiaomi,mi-router-wr30u-stock|\
xiaomi,redmi-router-ax6000-stock)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
;;
h3c,magic-nx30-pro|\
jcg,q30-pro|\
qihoo,360t7|\
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
tplink,tl-xdr6088|\
xiaomi,mi-router-ax3000t-ubootmod|\
xiaomi,mi-router-wr30u-ubootmod|\
xiaomi,redmi-router-ax6000-ubootmod)
. /lib/upgrade/nand.sh
local envubi=$(nand_find_ubi ubi)
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
;;
zyxel,ex5601-t0)
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
;;
zyxel,ex5601-t0-ubootmod)
. /lib/upgrade/nand.sh
local envubi=$(nand_find_ubi ubi)
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
;;
zyxel,ex5700-telenor)
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
;;
esac
config_load ubootenv
config_foreach ubootenv_add_app_config
exit 0