openwrt/target/linux/mediatek/dts/mt7629-netgear-ex6250-v2.dts

// SPDX-License-Identifier: GPL-2.0

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "mt7629.dtsi"

/ {
	model = "Netgear EX6250 v2";
	compatible = "netgear,ex6250-v2", "mediatek,mt7629";

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_power_red;
		led-running = &led_power_green;
		led-upgrade = &led_power_red;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
		bootargs-override = "console=ttyS0,115200n8";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		ap_mode {
			label = "ap_mode";
			gpios = <&pio 54 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
		};

		extender_mode {
			label = "extender_mode";
			gpios = <&pio 53 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_1>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power_green: power_green {
			label = "green:power";
			gpios = <&pio 21 GPIO_ACTIVE_LOW>;
		};

		led_power_red: power_red {
			label = "red:power";
			gpios = <&pio 61 GPIO_ACTIVE_LOW>;
		};

		client_green {
			label = "green:client";
			gpios = <&pio 59 GPIO_ACTIVE_LOW>;
		};

		client_red {
			label = "red:client";
			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
		};

		router_green {
			label = "green:router";
			gpios = <&pio 55 GPIO_ACTIVE_LOW>;
		};

		router_red {
			label = "red:router";
			gpios = <&pio 56 GPIO_ACTIVE_LOW>;
		};

		wps_green {
			label = "green:wps";
			gpios = <&pio 57 GPIO_ACTIVE_LOW>;
		};

		eth_green {
			label = "green:eth";
			gpios = <&pio 16 GPIO_ACTIVE_LOW>;
		};

		eth_yellow {
			label = "yellow:eth";
			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
		};
	};
};

&eth {
	pinctrl-names = "default";
	pinctrl-0 = <&eth_pins>;
	pinctrl-1 = <&ephy_leds_pins>;
	status = "okay";

	mac@1 {
		compatible = "mediatek,eth-mac";
		reg = <1>;
		phy-mode = "gmii";
		phy-handle = <&phy0>;
	};

	mdio-bus {
		#address-cells = <1>;
		#size-cells = <0>;

		phy0: ethernet-phy@0 {
			reg = <0>;
		};
	};
};

&qspi {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&qspi_pins>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "Bootloader";
				reg = <0x0 0x60000>;
				read-only;
			};

			partition@60000 {
				label = "Config";
				reg = <0x60000 0x10000>;
				read-only;
			};

			partition@70000 {
				label = "Factory";
				reg = <0x70000 0x10000>;
				read-only;
			};

			partition@80000 {
				label = "firmware";
				reg = <0x80000 0xcd0000>;
				compatible = "denx,fit";
			};

			partition@d50000 {
				label = "CFG";
				reg = <0xd50000 0x80000>;
				read-only;
			};

			partition@dd0000 {
				label = "RAE";
				reg = <0xdd0000 0x200000>;
				read-only;
			};

			partition@fd0000 {
				label = "POT";
				reg = <0xfd0000 0x10000>;
				read-only;
			};

			partition@fe0000 {
				label = "LOG";
				reg = <0xfe0000 0x20000>;
				read-only;
			};
		};
	};
};

&pio {
	eth_pins: eth-pins {
		mux {
			function = "eth";
			groups = "mdc_mdio";
		};
	};

	ephy_leds_pins: ephy-leds-pins {
		mux {
			function = "led";
			groups = "ephy_leds";
		};
	};

	qspi_pins: qspi-pins {
		mux {
			function = "flash";
			groups = "spi_nor";
		};
	};

	uart0_pins: uart0-pins {
		mux {
			function = "uart";
			groups = "uart0_txd_rxd" ;
		};
	};

	watchdog_pins: watchdog-pins {
		mux {
			function = "watchdog";
			groups = "watchdog";
		};
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
	status = "okay";
};

&watchdog {
	pinctrl-names = "default";
	pinctrl-0 = <&watchdog_pins>;
	status = "okay";
};