openwrt/target
Wenli Looi 73de41898f mediatek: add support for Netgear EX6250v2 series
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac
(Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work
currently as there is no driver.

Related: https://github.com/openwrt/openwrt/pull/5084

For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2.

Specifications:
* MT7629, 256 MiB RAM, 16 MiB SPI NOR
* MT7761N (2.4GHz) / MT7762N (5GHz) - no driver
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.
* After installation, perform a factory reset. Wait for the device to
  boot, then hold the reset button for 10 seconds. This is needed
  because sysupgrade in the stock firmware will attempt to preserve its
  configuration using sysupgrade.tgz.
  See https://github.com/openwrt/openwrt/pull/4182

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
2023-07-01 14:42:11 +02:00
..
imagebuilder treewide: add ORIG_PATH variable 2023-06-05 08:31:47 +02:00
linux mediatek: add support for Netgear EX6250v2 series 2023-07-01 14:42:11 +02:00
llvm-bpf llvm-bpf: fix rebuild check for generating tarball 2021-11-26 11:37:19 +01:00
sdk sdk: Expose CCACHE_DIR option 2023-06-05 10:00:58 +02:00
toolchain treewide: add ORIG_PATH variable 2023-06-05 08:31:47 +02:00
Config.in generic: groundwork for RISC-V 2023-05-28 13:19:10 +02:00
Makefile tools/llvm-bpf: move tarball packing to target/llvm-bpf 2021-11-22 12:00:40 +01:00