Tim Harvey 3666c67a54 imx6: add support for GW5907/GW5910/GW5912/GW5913 ... This patch adds support for GW5907/GW5910/GW5912/GW5913 IMX6 based boards from the Gateworks Ventana Family[A]: - backport upstream dt patches from 5.6 to 4.19 and 5.4 - add dtb's to ventana images - add board-name and network config A. https://www.gateworks.com/products/imx6-single-board-computer-gateworks-ventana-family Flashing instructions for Ventana boards: Using pre-flashed bootloader: - Use appropriate ubi image depending on board NAND to flash via bootloader: openwrt-imx6-ventana-squashfs-nand.ubi - 2KiB page size openwrt-imx6-ventana-large-squashfs-nand.ubi - 4KiB page size http://trac.gateworks.com/wiki/linux/ubi Using Gateworks JTAG dongle: - Use Gateworks mkimage_jtag script to create a JTAG image comprised of pre-built bootloader and ubi image: http://trac.gateworks.com/wiki/jtag_instructions Signed-off-by: Tim Harvey <tharvey@gateworks.com>		2020-03-12 12:59:44 +01:00
..
bootscript-apalis	imx6: apalis: fix variables in bootscript	2020-03-08 15:10:55 +01:00
bootscript-cubox	imx6: extend cubox support to hummingboard, add support for building full images	2018-09-03 12:06:24 +02:00
bootscript-ventana	imx6: added fixfdt to bootscript	2017-03-12 15:06:51 +01:00
Makefile	imx6: add support for GW5907/GW5910/GW5912/GW5913	2020-03-12 12:59:44 +01:00
recovery-apalis	imx6: apalis: move set_blkcnt variable into recovery script	2020-03-08 15:10:55 +01:00