openwrt/117-netgear_stora.patch at 6e7bc0c24327502b6d0f0eaf8b23d6e4ff9b5a34 - openwrt - Gitea

ExternalVendorCode/openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 00:11:13 +00:00

Zoltan HERPAI 0dfc0495fc kirkwood: add support for Netgear Stora (MS2000/2110) NAS

Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6281 @1GHz
 - 128Mb RAM
 - 256Mb NAND
 - 1x GbE LAN (Marvell 88E1116)
 - 1x USB 2.0
 - 2x SATA
 - PCF8563 RTC
 - LM75 sensor
 - TC654 PWM fan controller
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Installation:

1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 netgear_stora-u-boot.kwb
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

The fan is controlled in 3 stages by a script running every minute
from cron, measuring the CPU temperature.

Snippets taken from bodhi <mibodhi@gmail.com>

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

2024-03-17 00:19:22 +01:00

11 lines

303 B

Diff

Raw Blame History

 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
  	kirkwood-rs411.dtb \
  	kirkwood-sheevaplug.dtb \
  	kirkwood-sheevaplug-esata.dtb \
 +	kirkwood-stora.dtb \
  	kirkwood-t5325.dtb \
  	kirkwood-topkick.dtb \
  	kirkwood-ts219-6281.dtb \